From: Ondrej Zary <linux@rainbow-software.org>
To: Massimo Piccioni <dafastidio@libero.it>
Cc: alsa-devel@alsa-project.org,
Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] snd-ad1816a: remove useless struct snd_card_ad1816a
Date: Sun, 19 Aug 2012 23:27:19 +0200 [thread overview]
Message-ID: <201208192327.19752.linux@rainbow-software.org> (raw)
struct snd_card_ad1816a is only set but the values are never used then.
Removing it allows struct snd_card's private_data to be used for
struct snd_ad1816a, simplifying the code.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h
index d010858..62da41e 100644
--- a/include/sound/ad1816a.h
+++ b/include/sound/ad1816a.h
@@ -165,7 +165,7 @@ struct snd_ad1816a {
extern int snd_ad1816a_create(struct snd_card *card, unsigned long port,
int irq, int dma1, int dma2,
- struct snd_ad1816a **chip);
+ struct snd_ad1816a *chip);
extern int snd_ad1816a_pcm(struct snd_ad1816a *chip, int device, struct snd_pcm **rpcm);
extern int snd_ad1816a_mixer(struct snd_ad1816a *chip);
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index 94b83b6..1a374e6 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -63,11 +63,6 @@ MODULE_PARM_DESC(enable, "Enable ad1816a based soundcard.");
module_param_array(clockfreq, int, NULL, 0444);
MODULE_PARM_DESC(clockfreq, "Clock frequency for ad1816a driver (default = 0).");
-struct snd_card_ad1816a {
- struct pnp_dev *dev;
- struct pnp_dev *devmpu;
-};
-
static struct pnp_card_device_id snd_ad1816a_pnpids[] = {
/* Analog Devices AD1815 */
{ .id = "ADS7150", .devs = { { .id = "ADS7150" }, { .id = "ADS7151" } } },
@@ -99,25 +94,16 @@ MODULE_DEVICE_TABLE(pnp_card, snd_ad1816a_pnpids);
#define DRIVER_NAME "snd-card-ad1816a"
-static int __devinit snd_card_ad1816a_pnp(int dev, struct snd_card_ad1816a *acard,
- struct pnp_card_link *card,
+static int __devinit snd_card_ad1816a_pnp(int dev, struct pnp_card_link *card,
const struct pnp_card_device_id *id)
{
struct pnp_dev *pdev;
int err;
- acard->dev = pnp_request_card_device(card, id->devs[0].id, NULL);
- if (acard->dev == NULL)
+ pdev = pnp_request_card_device(card, id->devs[0].id, NULL);
+ if (pdev == NULL)
return -EBUSY;
- acard->devmpu = pnp_request_card_device(card, id->devs[1].id, NULL);
- if (acard->devmpu == NULL) {
- mpu_port[dev] = -1;
- snd_printk(KERN_WARNING PFX "MPU401 device busy, skipping.\n");
- }
-
- pdev = acard->dev;
-
err = pnp_activate_dev(pdev);
if (err < 0) {
printk(KERN_ERR PFX "AUDIO PnP configure failure\n");
@@ -130,16 +116,17 @@ static int __devinit snd_card_ad1816a_pnp(int dev, struct snd_card_ad1816a *acar
dma2[dev] = pnp_dma(pdev, 1);
irq[dev] = pnp_irq(pdev, 0);
- if (acard->devmpu == NULL)
+ pdev = pnp_request_card_device(card, id->devs[1].id, NULL);
+ if (pdev == NULL) {
+ mpu_port[dev] = -1;
+ snd_printk(KERN_WARNING PFX "MPU401 device busy, skipping.\n");
return 0;
-
- pdev = acard->devmpu;
+ }
err = pnp_activate_dev(pdev);
if (err < 0) {
printk(KERN_ERR PFX "MPU401 PnP configure failure\n");
mpu_port[dev] = -1;
- acard->devmpu = NULL;
} else {
mpu_port[dev] = pnp_port_start(pdev, 0);
mpu_irq[dev] = pnp_irq(pdev, 0);
@@ -153,18 +140,17 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard
{
int error;
struct snd_card *card;
- struct snd_card_ad1816a *acard;
struct snd_ad1816a *chip;
struct snd_opl3 *opl3;
struct snd_timer *timer;
error = snd_card_create(index[dev], id[dev], THIS_MODULE,
- sizeof(struct snd_card_ad1816a), &card);
+ sizeof(struct snd_ad1816a), &card);
if (error < 0)
return error;
- acard = card->private_data;
+ chip = card->private_data;
- if ((error = snd_card_ad1816a_pnp(dev, acard, pcard, pid))) {
+ if ((error = snd_card_ad1816a_pnp(dev, pcard, pid))) {
snd_card_free(card);
return error;
}
@@ -174,7 +160,7 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard
irq[dev],
dma1[dev],
dma2[dev],
- &chip)) < 0) {
+ chip)) < 0) {
snd_card_free(card);
return error;
}
diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c
index 177eed3..de5cc1c 100644
--- a/sound/isa/ad1816a/ad1816a_lib.c
+++ b/sound/isa/ad1816a/ad1816a_lib.c
@@ -548,7 +548,6 @@ static int snd_ad1816a_free(struct snd_ad1816a *chip)
snd_dma_disable(chip->dma2);
free_dma(chip->dma2);
}
- kfree(chip);
return 0;
}
@@ -573,19 +572,13 @@ static const char __devinit *snd_ad1816a_chip_id(struct snd_ad1816a *chip)
int __devinit snd_ad1816a_create(struct snd_card *card,
unsigned long port, int irq, int dma1, int dma2,
- struct snd_ad1816a **rchip)
+ struct snd_ad1816a *chip)
{
static struct snd_device_ops ops = {
.dev_free = snd_ad1816a_dev_free,
};
int error;
- struct snd_ad1816a *chip;
- *rchip = NULL;
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
chip->irq = -1;
chip->dma1 = -1;
chip->dma2 = -1;
@@ -631,7 +624,6 @@ int __devinit snd_ad1816a_create(struct snd_card *card,
return error;
}
- *rchip = chip;
return 0;
}
--
Ondrej Zary
next reply other threads:[~2012-08-19 20:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-19 21:27 Ondrej Zary [this message]
2012-08-20 9:13 ` [PATCH 1/2] snd-ad1816a: remove useless struct snd_card_ad1816a Takashi Iwai
2012-08-20 9:13 ` [alsa-devel] " Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201208192327.19752.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=alsa-devel@alsa-project.org \
--cc=dafastidio@libero.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.