From: Ondrej Zary <linux@rainbow-software.org>
To: Massimo Piccioni <dafastidio@libero.it>
Cc: alsa-devel@alsa-project.org,
Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/2] snd-ad1816a: Implement suspend/resume
Date: Sun, 19 Aug 2012 23:27:26 +0200 [thread overview]
Message-ID: <201208192327.27334.linux@rainbow-software.org> (raw)
Implement suspend/resume support for AD1816 chips.
Tested with Terratec SoundSystem Base-1.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h
index 62da41e..2a89f0d 100644
--- a/include/sound/ad1816a.h
+++ b/include/sound/ad1816a.h
@@ -147,6 +147,9 @@ struct snd_ad1816a {
unsigned int c_dma_size;
struct snd_timer *timer;
+#ifdef CONFIG_PM
+ unsigned short image[48];
+#endif
};
@@ -171,5 +174,9 @@ extern int snd_ad1816a_pcm(struct snd_ad1816a *chip, int device, struct snd_pcm
extern int snd_ad1816a_mixer(struct snd_ad1816a *chip);
extern int snd_ad1816a_timer(struct snd_ad1816a *chip, int device,
struct snd_timer **rtimer);
+#ifdef CONFIG_PM
+extern void snd_ad1816a_suspend(struct snd_ad1816a *chip);
+extern void snd_ad1816a_resume(struct snd_ad1816a *chip);
+#endif
#endif /* __SOUND_AD1816A_H */
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index 1a374e6..2c2f829 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -244,13 +244,37 @@ static void __devexit snd_ad1816a_pnp_remove(struct pnp_card_link * pcard)
pnp_set_card_drvdata(pcard, NULL);
}
+#ifdef CONFIG_PM
+static int snd_ad1816a_pnp_suspend(struct pnp_card_link *pcard,
+ pm_message_t state)
+{
+ struct snd_card *card = pnp_get_card_drvdata(pcard);
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+ snd_ad1816a_suspend(card->private_data);
+ return 0;
+}
+
+static int snd_ad1816a_pnp_resume(struct pnp_card_link *pcard)
+{
+ struct snd_card *card = pnp_get_card_drvdata(pcard);
+
+ snd_ad1816a_resume(card->private_data);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ return 0;
+}
+#endif
+
static struct pnp_card_driver ad1816a_pnpc_driver = {
.flags = PNP_DRIVER_RES_DISABLE,
.name = "ad1816a",
.id_table = snd_ad1816a_pnpids,
.probe = snd_ad1816a_pnp_detect,
.remove = __devexit_p(snd_ad1816a_pnp_remove),
- /* FIXME: suspend/resume */
+#ifdef CONFIG_PM
+ .suspend = snd_ad1816a_pnp_suspend,
+ .resume = snd_ad1816a_pnp_resume,
+#endif
};
static int __init alsa_card_ad1816a_init(void)
diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c
index de5cc1c..db64df6 100644
--- a/sound/isa/ad1816a/ad1816a_lib.c
+++ b/sound/isa/ad1816a/ad1816a_lib.c
@@ -491,7 +491,7 @@ static int snd_ad1816a_capture_close(struct snd_pcm_substream *substream)
}
-static void __devinit snd_ad1816a_init(struct snd_ad1816a *chip)
+static void snd_ad1816a_init(struct snd_ad1816a *chip)
{
unsigned long flags;
@@ -511,6 +511,32 @@ static void __devinit snd_ad1816a_init(struct snd_ad1816a *chip)
spin_unlock_irqrestore(&chip->lock, flags);
}
+#ifdef CONFIG_PM
+void snd_ad1816a_suspend(struct snd_ad1816a *chip)
+{
+ int reg;
+ unsigned long flags;
+
+ snd_pcm_suspend_all(chip->pcm);
+ spin_lock_irqsave(&chip->lock, flags);
+ for (reg = 0; reg < 48; reg++)
+ chip->image[reg] = snd_ad1816a_read(chip, reg);
+ spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+void snd_ad1816a_resume(struct snd_ad1816a *chip)
+{
+ int reg;
+ unsigned long flags;
+
+ snd_ad1816a_init(chip);
+ spin_lock_irqsave(&chip->lock, flags);
+ for (reg = 0; reg < 48; reg++)
+ snd_ad1816a_write(chip, reg, chip->image[reg]);
+ spin_unlock_irqrestore(&chip->lock, flags);
+}
+#endif
+
static int __devinit snd_ad1816a_probe(struct snd_ad1816a *chip)
{
unsigned long flags;
--
Ondrej Zary
reply other threads:[~2012-08-19 20:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201208192327.27334.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=alsa-devel@alsa-project.org \
--cc=dafastidio@libero.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.