All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <tom.rini@gmail.com>
To: Saul Wold <sgw@linux.intel.com>
Cc: Patches and discussions about the oe-core layer
	<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 2/5] u-boot-fw-utils: Correct EXTRA_OEMAKE
Date: Mon, 20 Aug 2012 10:57:02 -0700	[thread overview]
Message-ID: <20120820175702.GA9706@bill-the-cat> (raw)
In-Reply-To: <502F01FB.1020303@linux.intel.com>

On Fri, Aug 17, 2012 at 07:46:19PM -0700, Saul Wold wrote:
> On 08/17/2012 09:48 AM, Tom Rini wrote:
> >- HOSTCFLAGS / HOSTLDFLAGS have been valid for a long time for tools/env
> >- HOSTSTRIP will be needed in the future, does no harm to be correct
> >   now.
> >
> >Signed-off-by: Tom Rini <trini@ti.com>
> >---
> >  meta/recipes-bsp/u-boot/u-boot-fw-utils_2011.06.bb |    4 ++--
> >  .../u-boot/u-boot-fw-utils_2012.04.01.bb           |    4 +++-
> >  2 files changed, 5 insertions(+), 3 deletions(-)
> >
> >diff --git a/meta/recipes-bsp/u-boot/u-boot-fw-utils_2011.06.bb b/meta/recipes-bsp/u-boot/u-boot-fw-utils_2011.06.bb
> >index 7c4df1a..99eef15 100644
> >--- a/meta/recipes-bsp/u-boot/u-boot-fw-utils_2011.06.bb
> >+++ b/meta/recipes-bsp/u-boot/u-boot-fw-utils_2011.06.bb
> >@@ -6,7 +6,7 @@ SECTION = "bootloader"
> >
> >  DEPENDS = "mtd-utils"
> >
> >-PR = "r1"
> >+PR = "r2"
> >
> >  SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-${PV}.tar.bz2"
> >
> >@@ -15,7 +15,7 @@ SRC_URI[sha256sum] = "362ddb935885da98cf461eba08f31e3e59d0c4ada6cb2fa15596f43af3
> >
> >  S = "${WORKDIR}/u-boot-${PV}"
> >
> >-EXTRA_OEMAKE = 'HOSTCC="${CC}"'
> >+EXTRA_OEMAKE = 'HOSTCC="${CC}" HOSTCFLAGS="${CFLAGS} HOSTLDFLAGS="${LDFLAGS}" HOSTSTRIP=true'
> >
> >  do_compile () {
> >    oe_runmake env
> >diff --git a/meta/recipes-bsp/u-boot/u-boot-fw-utils_2012.04.01.bb b/meta/recipes-bsp/u-boot/u-boot-fw-utils_2012.04.01.bb
> >index fe3422a..364f8a5 100644
> >--- a/meta/recipes-bsp/u-boot/u-boot-fw-utils_2012.04.01.bb
> >+++ b/meta/recipes-bsp/u-boot/u-boot-fw-utils_2012.04.01.bb
> >@@ -5,6 +5,8 @@ SECTION = "bootloader"
> >
> >  DEPENDS = "mtd-utils"
> >
> >+PR = "r1"
> >+
> >  # This is needs to be validated among supported BSP's before we can
> >  # make it default
> >  DEFAULT_PREFERENCE = "-1"
> >@@ -20,7 +22,7 @@ SRC_URI = "git://git.denx.de/u-boot.git;branch=master;protocol=git"
> >
> >  S = "${WORKDIR}/git"
> >
> >-EXTRA_OEMAKE = 'HOSTCC="${CC}"'
> >+EXTRA_OEMAKE = 'HOSTCC="${CC}" HOSTCFLAGS="${CFLAGS} HOSTLDFLAGS="${LDFLAGS}" HOSTSTRIP=true'
> >
> >  do_compile () {
> >    oe_runmake env
> >
> 
> 
> This had a failure also:
> 
> >ERROR: Function failed: do_install (see /srv/ssd/sgw_ab/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/i586-poky-linux/u-boot-fw-utils-2011.06-r2/temp/log.do_install.69452 for further information)
> >ERROR: Logfile of failure stored in: /srv/ssd/sgw_ab/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/i586-poky-linux/u-boot-fw-utils-2011.06-r2/temp/log.do_install.69452
> >Log data follows:
> >| DEBUG: Executing shell function do_install
> >| install: cannot stat `/srv/ssd/sgw_ab/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/i586-poky-linux/u-boot-fw-utils-2011.06-r2/u-boot-2011.06/tools/env/fw_printenv': No such file or directory
> >| ERROR: Function failed: do_install (see /srv/ssd/sgw_ab/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/i586-poky-linux/u-boot-fw-utils-2011.06-r2/temp/log.do_install.69452 for further information)
> >NOTE: package u-boot-fw-utils-2011.06-r2: task do_install: Failed
> >ERROR: Task 2755 (/srv/ssd/sgw_ab/yocto-autobuilder/yocto-slave/nightly-world/build/meta/recipes-bsp/u-boot/u-boot-fw-utils_2011.06.bb, do_install) failed with exit code '1'

I have to admit that since these were trivial changes I didn't try and
build them.  But oe-core doesn't build anymore.  Doing:
git pull
git reset --hard origin/master
rm -rf build/conf build/tmp*
. oe-init-build-env
bitbake core-image-sato

Fails and can't give me a log.  Can you pastebin the compile logs?
Thanks!

-- 
Tom



  reply	other threads:[~2012-08-20 18:09 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-17 16:48 [PATCH 1/5] u-boot-mkimage: Correct EXTRA_OEMAKE Tom Rini
2012-08-17 16:48 ` [PATCH 2/5] u-boot-fw-utils: " Tom Rini
2012-08-18  2:46   ` Saul Wold
2012-08-20 17:57     ` Tom Rini [this message]
2012-08-21 19:28       ` Saul Wold
2012-08-21 20:56         ` Khem Raj
2012-08-21 23:39           ` Tom Rini
2012-08-17 16:48 ` [PATCH 3/5] u-boot-fw-utils: Update to v2012.07 Tom Rini
2012-08-17 16:48 ` [PATCH 4/5] u-boot-mkimage: " Tom Rini
2012-08-18  2:45   ` Saul Wold
2012-08-18 13:06     ` Otavio Salvador
2012-08-17 16:48 ` [PATCH 5/5] u-boot: " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120820175702.GA9706@bill-the-cat \
    --to=tom.rini@gmail.com \
    --cc=openembedded-core@lists.openembedded.org \
    --cc=sgw@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.