From: Marcelo Tosatti <mtosatti@redhat.com>
To: "Nikunj A. Dadhania" <nikunj@linux.vnet.ibm.com>
Cc: avi@redhat.com, raghukt@linux.vnet.ibm.com, alex.shi@intel.com,
kvm@vger.kernel.org, stefano.stabellini@eu.citrix.com,
peterz@infradead.org, hpa@zytor.com, vsrivatsa@gmail.com,
mingo@elte.hu
Subject: Re: [PATCH v4 4/8] KVM-HV: Add VCPU running/pre-empted state for guest
Date: Thu, 23 Aug 2012 08:46:22 -0300 [thread overview]
Message-ID: <20120823114622.GA4747@amt.cnet> (raw)
In-Reply-To: <20120821112640.3512.43771.stgit@abhimanyu>
On Tue, Aug 21, 2012 at 04:56:43PM +0530, Nikunj A. Dadhania wrote:
> From: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
>
> Hypervisor code to indicate guest running/pre-empteded status through
> msr. The page is now pinned during MSR write time and use
> kmap_atomic/kunmap_atomic to access the shared area vcpu_state area.
>
> Suggested-by: Marcelo Tosatti <mtosatti@redhat.com>
> Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
> ---
> arch/x86/include/asm/kvm_host.h | 7 +++
> arch/x86/kvm/cpuid.c | 1
> arch/x86/kvm/x86.c | 88 ++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 94 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 09155d6..441348f 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -429,6 +429,13 @@ struct kvm_vcpu_arch {
> struct kvm_steal_time steal;
> } st;
>
> + /* indicates vcpu is running or preempted */
> + struct {
> + u64 msr_val;
> + struct page *vs_page;
> + unsigned int vs_offset;
> + } v_state;
> +
> u64 last_guest_tsc;
> u64 last_kernel_ns;
> u64 last_host_tsc;
> diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
> index 0595f13..37ab364 100644
> --- a/arch/x86/kvm/cpuid.c
> +++ b/arch/x86/kvm/cpuid.c
> @@ -411,6 +411,7 @@ static int do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
> (1 << KVM_FEATURE_CLOCKSOURCE2) |
> (1 << KVM_FEATURE_ASYNC_PF) |
> (1 << KVM_FEATURE_PV_EOI) |
> + (1 << KVM_FEATURE_VCPU_STATE) |
> (1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT);
>
> if (sched_info_on())
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 59b5950..43f2c19 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -806,13 +806,13 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
> * kvm-specific. Those are put in the beginning of the list.
> */
>
> -#define KVM_SAVE_MSRS_BEGIN 9
> +#define KVM_SAVE_MSRS_BEGIN 10
> static u32 msrs_to_save[] = {
> MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
> MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
> HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
> HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
> - MSR_KVM_PV_EOI_EN,
> + MSR_KVM_VCPU_STATE, MSR_KVM_PV_EOI_EN,
> MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> MSR_STAR,
> #ifdef CONFIG_X86_64
> @@ -1557,6 +1557,63 @@ static void record_steal_time(struct kvm_vcpu *vcpu)
> &vcpu->arch.st.steal, sizeof(struct kvm_steal_time));
> }
>
> +static void kvm_set_atomic(u64 *addr, u64 old, u64 new)
> +{
> + int loop = 1000000;
> + while (1) {
> + if (cmpxchg(addr, old, new) == old)
> + break;
> + loop--;
> + if (!loop) {
> + pr_info("atomic cur: %lx old: %lx new: %lx\n",
> + *addr, old, new);
> + break;
> + }
> + }
> +}
> +
> +static void kvm_set_vcpu_state(struct kvm_vcpu *vcpu)
> +{
> + struct kvm_vcpu_state *vs;
> + char *kaddr;
> +
> + if (!((vcpu->arch.v_state.msr_val & KVM_MSR_ENABLED) &&
> + vcpu->arch.v_state.vs_page))
> + return;
It was agreed it was necessary to have valid vs_page only if MSR was
enabled? Or was that a misunderstanding?
Looks good otherwise.
next prev parent reply other threads:[~2012-08-23 12:02 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 11:25 [PATCH v4 0/8] KVM paravirt remote flush tlb Nikunj A. Dadhania
2012-08-21 11:26 ` [PATCH v4 1/8] mm, x86: Add HAVE_RCU_TABLE_FREE support Nikunj A. Dadhania
2012-08-21 11:26 ` [PATCH v4 2/8] mm: Add missing TLB invalidate to RCU page-table freeing Nikunj A. Dadhania
2012-08-21 11:26 ` [PATCH v4 3/8] KVM Guest: Add VCPU running/pre-empted state for guest Nikunj A. Dadhania
2012-08-23 9:36 ` Marcelo Tosatti
2012-08-24 5:39 ` Nikunj A Dadhania
2012-08-24 15:02 ` Marcelo Tosatti
2012-08-27 4:24 ` Nikunj A Dadhania
2012-08-21 11:26 ` [PATCH v4 4/8] KVM-HV: " Nikunj A. Dadhania
2012-08-23 11:46 ` Marcelo Tosatti [this message]
2012-08-24 5:19 ` Nikunj A Dadhania
2012-08-24 15:02 ` Marcelo Tosatti
2012-08-21 11:27 ` [PATCH v4 5/8] KVM Guest: Add paravirt kvm_flush_tlb_others Nikunj A. Dadhania
2012-08-21 11:27 ` [PATCH v4 6/8] KVM-HV: Add flush_on_enter before guest enter Nikunj A. Dadhania
2012-08-21 11:27 ` [PATCH v4 7/8] Enable HAVE_RCU_TABLE_FREE for kvm when PARAVIRT_TLB_FLUSH is enabled Nikunj A. Dadhania
2012-08-21 11:28 ` [PATCH v4 8/8] KVM-doc: Add paravirt tlb flush document Nikunj A. Dadhania
2012-08-23 11:48 ` [PATCH v4 0/8] KVM paravirt remote flush tlb Marcelo Tosatti
2012-09-03 14:33 ` Avi Kivity
2012-09-03 15:27 ` Avi Kivity
2012-09-04 1:30 ` Nikunj A Dadhania
2012-09-04 7:51 ` Avi Kivity
2012-09-04 8:08 ` Nikunj A Dadhania
2012-09-04 10:37 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120823114622.GA4747@amt.cnet \
--to=mtosatti@redhat.com \
--cc=alex.shi@intel.com \
--cc=avi@redhat.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=nikunj@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=raghukt@linux.vnet.ibm.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=vsrivatsa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.