From: Vivek Goyal <vgoyal-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: initramfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
chaowang-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Subject: Re: [patch v2 1/3] wait host devs in base module
Date: Thu, 23 Aug 2012 11:31:39 -0400 [thread overview]
Message-ID: <20120823153138.GJ12232@redhat.com> (raw)
In-Reply-To: <20120823030627.975913807-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Thu, Aug 23, 2012 at 11:02:22AM +0800, dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org wrote:
> each dev in host_devs[] should be waited in initqueue to make sure they
> are oneline before initqueue finish.
>
> Add a new wait_host_devs.sh in base module to make this a generic thing.
> Because all the devs in fstab lines are also added to host_devs, so no need
> do same wait in fstab-sys module anymore.
>
> [v2->v3]: do not add slave devices to host_devs
> wait for persistent dev name in initramfs
>
> Signed-off-by: Dave Young <dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> dracut.sh | 16 ++++++++++++++++
> modules.d/95fstab-sys/module-setup.sh | 1 -
> modules.d/95fstab-sys/wait-mount-dev.sh | 22 ----------------------
> modules.d/99base/module-setup.sh | 1 +
> modules.d/99base/wait-host-devs.sh | 20 ++++++++++++++++++++
> 5 files changed, 37 insertions(+), 23 deletions(-)
>
> --- dracut.orig/dracut.sh
> +++ dracut/dracut.sh
> @@ -903,6 +903,22 @@ done
>
> dinfo "*** Including modules done ***"
>
> +get_persistent_dev() {
> + local i _tmp
> + local _dev=${1##*/}
> +
> + for i in /dev/disk/by-id/*; do
> + _tmp=$(readlink $i)
> + [ "${_tmp##*/}" = "$_dev" ] && echo $i && return
> + done
> +}
> +
I am wondering that will it be better to rely on user to pass the
persistent device name instead of we trying to convert it into a name
generated by udev.
I kind of prefer to let user provide the persistent name instead of
dong tricks internally. (Either in fstab or using --device option).
Thanks
Vivek
> +## save host_devs which we need bring up
> +for _dev in ${host_devs[@]}; do
> + _pdev=$(get_persistent_dev $_dev)
> + [ -n "$_pdev" ] && echo $_pdev >> $initdir/etc/host_devs
> +done
> +
> ## final stuff that has to happen
> if [[ $no_kernel != yes ]]; then
>
> --- dracut.orig/modules.d/95fstab-sys/module-setup.sh
> +++ dracut/modules.d/95fstab-sys/module-setup.sh
> @@ -13,5 +13,4 @@ depends() {
> install() {
> [ -f /etc/fstab.sys ] && inst_simple /etc/fstab.sys
> inst_hook pre-pivot 00 "$moddir/mount-sys.sh"
> - inst_hook cmdline 00 "$moddir/wait-mount-dev.sh"
> }
> --- dracut.orig/modules.d/95fstab-sys/wait-mount-dev.sh
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -#!/bin/sh
> -# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
> -# ex: ts=8 sw=4 sts=4 et filetype=sh
> -
> -type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
> -type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
> -
> -fstab_wait_dev() {
> - local _dev _mp _fs _opts _dump _pass _rest
> - test -e "$1" || return 1
> - while read _dev _mp _fs _opts _dump _pass _rest; do
> - [ -z "${_dev%%#*}" ] && continue # Skip comment lines
> - case "$_dev" in
> - /dev/?*)
> - wait_for_dev $_dev;;
> - *) ;;
> - esac
> - done < $1
> - return 0
> -}
> -
> -[ -f /etc/fstab ] && fstab_wait_dev /etc/fstab
> --- dracut.orig/modules.d/99base/module-setup.sh
> +++ dracut/modules.d/99base/module-setup.sh
> @@ -41,6 +41,7 @@ install() {
> dracut_install switch_root || dfatal "Failed to install switch_root"
>
> inst_simple "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
> + inst_hook cmdline 00 "$moddir/wait-host-devs.sh"
> inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
> mkdir -p "${initdir}/var"
> [ -x /lib/systemd/systemd-timestamp ] && inst /lib/systemd/systemd-timestamp
> --- /dev/null
> +++ dracut/modules.d/99base/wait-host-devs.sh
> @@ -0,0 +1,20 @@
> +#!/bin/sh
> +# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
> +# ex: ts=8 sw=4 sts=4 et filetype=sh
> +
> +type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
> +
> +wait_host_devs() {
> + local _dev
> +
> + while read _dev; do
> + case "$_dev" in
> + /dev/?*)
> + wait_for_dev $_dev
> + ;;
> + *) ;;
> + esac
> + done < $1
> +}
> +
> +[ -f /etc/host_devs ] && wait_host_devs /etc/host_devs
next prev parent reply other threads:[~2012-08-23 15:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-23 3:02 [patch v2 0/3] add --device option dyoung-H+wXaHxf7aLQT0dZR+AlfA
2012-08-23 3:02 ` [patch v2 1/3] wait host devs in base module dyoung-H+wXaHxf7aLQT0dZR+AlfA
[not found] ` <20120823030627.975913807-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-23 15:31 ` Vivek Goyal [this message]
[not found] ` <20120823153138.GJ12232-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-27 6:35 ` Dave Young
[not found] ` <503B1530.6060208-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-27 14:58 ` Vivek Goyal
2012-08-23 3:02 ` [patch v2 2/3] Add for_each_host_dev_and_slaves for device only checking dyoung-H+wXaHxf7aLQT0dZR+AlfA
[not found] ` <20120823030628.133563734-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-23 15:26 ` Vivek Goyal
[not found] ` <20120823152631.GI12232-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-27 6:57 ` Dave Young
[not found] ` <503B1A62.4010905-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-27 8:00 ` Dave Young
[not found] ` <503B292A.70707-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2012-08-27 15:03 ` Vivek Goyal
2012-08-23 3:02 ` [patch v2 3/3] Add a dracut option --device to bring up a device in initramfs dyoung-H+wXaHxf7aLQT0dZR+AlfA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120823153138.GJ12232@redhat.com \
--to=vgoyal-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=chaowang-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dyoung-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=initramfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.