[PATCH 3/4 V2] ARM: mxs: Update DENX M28 machine and dts file

[marek.vasut@gmail.com (Marek Vasut)]

Dear Shawn Guo,

> On Sat, Aug 25, 2012 at 01:51:39AM +0200, Marek Vasut wrote:
> > +
> > +		reg_vddio_sd0: vddio-sd0 {
> > +			compatible = "regulator-fixed";
> > +			regulator-name = "vddio-sd0";
> > +			regulator-min-microvolt = <3300000>;
> > +			regulator-max-microvolt = <3300000>;
> > +			gpio = <&gpio3 28 0>;
> > +		};
> > +
> > +		reg_usb0_vbus: usb0_vbus {
> > +			compatible = "regulator-fixed";
> > +			regulator-name = "usb0_vbus";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			gpio = <&gpio3 12 0>;
> > +			enable-active-low;
> 
> Documentation/devicetree/bindings/regulator/fixed-regulator.txt:
> 
> - enable-active-high: Polarity of GPIO is Active high
> If this property is missing, the default assumed is Active low.
> 
> I suspect you need to recheck this aspect for all these 3 fixed
> regulators.

Ok, so the prop had no impact? I'll retest and resubmit. Also, put the SPS1 on 
hold until the led issue is done for.

Thanks

> > +		};
> > +
> > +		reg_usb1_vbus: usb1_vbus {
> > +			compatible = "regulator-fixed";
> > +			regulator-name = "usb1_vbus";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			gpio = <&gpio3 13 0>;
> > +			enable-active-low;
> > +		};

Best regards,
Marek Vasut