[U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock

[Marek Vasut <marek.vasut@gmail.com>]

Dear Otavio Salvador,

> This changes the board config to follow m28evk board configuration.
> 
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
>  board/freescale/mx28evk/mx28evk.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/freescale/mx28evk/mx28evk.c
> b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644
> --- a/board/freescale/mx28evk/mx28evk.c
> +++ b/board/freescale/mx28evk/mx28evk.c
> @@ -49,8 +49,8 @@ int board_early_init_f(void)
> 
>  	/* SSP0 clock at 96MHz */
>  	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
> -	/* SSP2 clock at 96MHz */
> -	mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
> +	/* SSP2 clock at 160MHz */
> +	mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);

You _MUST_ also adjust the default SPI flash sleep, otherwise this is flat 
pointless change

>  #ifdef	CONFIG_CMD_USB
>  	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);

Best regards,
Marek Vasut