Re: Error compiling CRtools-0.1..

[Serge Hallyn <serge.hallyn-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>]

Please cc: criu-GEFAQzZX7r8dnm+yROfE0A@public.gmane.org (I've cc:d them here) on crtools questions.

-serge

Quoting Muralidhar, Rajeev D (rajeev.d.muralidhar-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org):
> OK I could fix all compilation issues by moving to a x86_64 OS and having the following packages (it would be good to update the wiki page, I can provide the detailed steps I had to take to the owner, pls let me know)
> 
> 			§ Sudo apt-get install libprotobuf-dev
> 			§ Sudo apt-get install libprotoc-dev
> 			§ sudo apt-get install protobuf-c-compiler
> 			§ sudo apt-get install libprotobuf-c0
> 			§ sudo apt-get install libprotobuf-c0-dev
> 
> Now, when trying to test crtools, I get the following error:
> 
> $ ./crtools check
> Error (sk-unix.c: 283): Can't stat socket 12547 (./var/run/sdp): Bad file descriptor
> 
> And a whole bunch of such errors.
> 
> What might the problem be? Am I missing some netlink library? I have installed libnetlink, libnl, libnl-dev.
> 
> Thanks
> Rajeev
> 
> -----Original Message-----
> From: Muralidhar, Rajeev D 
> Sent: Tuesday, August 28, 2012 4:40 PM
> To: Muralidhar, Rajeev D; Serge Hallyn
> Cc: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> Subject: Error compiling CRtools-0.1..
> 
> OK it seems like one error was that 
> 
> #include "restorer.h" 
> 
> Was missing from syscall-common-x86-64., which has the definition of rcx.
> 
> Now I can proceed one step further in compilation, but I get these errors:
> 
> In file included from ./include/types.h:7,
>                  from ./include/restorer.h:8,
>                  from syscall-common-x86-64.S:2,
>                  from syscall-x86-64.S:3:
> ./include/bitops.h:50:3: error: #error x86-32 is not implemented yet In file included from ./include/restorer.h:8,
>                  from syscall-common-x86-64.S:2,
>                  from syscall-x86-64.S:3:
> ./include/types.h:180:3: error: #error x86-32 bit mode not yet implemented In file included from ./include/syscall.h:4,
>                  from ./include/lock.h:11,
>                  from ./include/restorer.h:10,
>                  from syscall-common-x86-64.S:2,
>                  from syscall-x86-64.S:3:
> ./include/syscall-types.h:17:3: error: #error x86-32 bit mode not yet implemented In file included from syscall-common-x86-64.S:2,
>                  from syscall-x86-64.S:3:
> ./include/restorer.h:20:3: error: #error Only x86-64 is supported
> 
> I have a Core i5 laptop, running Ubuntu 10.04. uname -m shows "i686". 
> 
> Does this mean that CR tools will run only on x86_64, but will never work on 32-bit systems? (Isnt Intel x86_64 is backward compatible with 32-bit?)
> 
> Thanks for your help in advance. 
> Rajeev
> 
> 
> -----Original Message-----
> From: containers-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org [mailto:containers-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org] On Behalf Of Muralidhar, Rajeev D
> Sent: Tuesday, August 28, 2012 2:12 PM
> To: Serge Hallyn
> Cc: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> Subject: RE: Linux C/R: VNC server/Xterm checkpoint/recovery
> 
> I forgot to mention that I am doing on this on a Ubuntu 10.04, and uname -a shows "i686"
> 
> Thanks
> Rajeev
> 
> 
> -----Original Message-----
> From: Muralidhar, Rajeev D
> Sent: Tuesday, August 28, 2012 1:56 PM
> To: Serge Hallyn
> Cc: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; Muralidhar, Rajeev D
> Subject: RE: Linux C/R: VNC server/Xterm checkpoint/recovery
> 
> Hi all,
> 
> I got started with the information on http://criu.org/Main_Page 
> 
> I installed the linux-cr.git tree, compiled & have that ready. 
> 
> For CR-tools, I got all the required packages, but I am not able to compile crtools. This is the error I am seeing. Can someone pls let me know why I am getting this error?
> 
> rdmurali@ubuntu:~/Linux-CR/crtools$ make
>   PROTOBUF inventory.pb-c.c
>   CC       inventory.pb-c.o
>   PROTOBUF fdinfo.pb-c.c
>   CC       fdinfo.pb-c.o
>   PROTOBUF fown.pb-c.c
>   CC       fown.pb-c.o
>   PROTOBUF regfile.pb-c.c
>   CC       regfile.pb-c.o
>   PROTOBUF ghost-file.pb-c.c
>   CC       ghost-file.pb-c.o
>   PROTOBUF fifo.pb-c.c
>   CC       fifo.pb-c.o
>   PROTOBUF remap-file-path.pb-c.c
>   CC       remap-file-path.pb-c.o
>   PROTOBUF eventfd.pb-c.c
>   CC       eventfd.pb-c.o
>   PROTOBUF eventpoll.pb-c.c
>   CC       eventpoll.pb-c.o
>   PROTOBUF fh.pb-c.c
>   CC       fh.pb-c.o
>   PROTOBUF inotify.pb-c.c
>   CC       inotify.pb-c.o
>   PROTOBUF signalfd.pb-c.c
>   CC       signalfd.pb-c.o
>   PROTOBUF fs.pb-c.c
>   CC       fs.pb-c.o
>   PROTOBUF pstree.pb-c.c
>   CC       pstree.pb-c.o
>   PROTOBUF pipe.pb-c.c
>   CC       pipe.pb-c.o
>   PROTOBUF tcp-stream.pb-c.c
>   CC       tcp-stream.pb-c.o
>   PROTOBUF sk-packet.pb-c.c
>   CC       sk-packet.pb-c.o
>   PROTOBUF mnt.pb-c.c
>   CC       mnt.pb-c.o
>   PROTOBUF pipe-data.pb-c.c
>   CC       pipe-data.pb-c.o
>   PROTOBUF sa.pb-c.c
>   CC       sa.pb-c.o
>   PROTOBUF itimer.pb-c.c
>   CC       itimer.pb-c.o
>   PROTOBUF mm.pb-c.c
>   CC       mm.pb-c.o
>   PROTOBUF sk-opts.pb-c.c
>   CC       sk-opts.pb-c.o
>   PROTOBUF sk-unix.pb-c.c
>   CC       sk-unix.pb-c.o
>   PROTOBUF sk-inet.pb-c.c
>   CC       sk-inet.pb-c.o
>   PROTOBUF packet-sock.pb-c.c
>   CC       packet-sock.pb-c.o
> packet-sock.pb-c.c: In function 'packet_sock_entry__init':
> packet-sock.pb-c.c:98: warning: this decimal constant is unsigned only in ISO C90
> packet-sock.pb-c.c: At top level:
> packet-sock.pb-c.c:318: warning: this decimal constant is unsigned only in ISO C90
>   PROTOBUF ipc-var.pb-c.c
>   CC       ipc-var.pb-c.o
>   PROTOBUF ipc-desc.pb-c.c
>   CC       ipc-desc.pb-c.o
>   PROTOBUF ipc-shm.pb-c.c
>   CC       ipc-shm.pb-c.o
>   PROTOBUF ipc-msg.pb-c.c
>   CC       ipc-msg.pb-c.o
>   PROTOBUF ipc-sem.pb-c.c
>   CC       ipc-sem.pb-c.o
>   PROTOBUF utsns.pb-c.c
>   CC       utsns.pb-c.o
>   PROTOBUF creds.pb-c.c
>   CC       creds.pb-c.o
>   PROTOBUF vma.pb-c.c
>   CC       vma.pb-c.o
>   PROTOBUF core.pb-c.c
>   CC       core.pb-c.o
>   PROTOBUF netdev.pb-c.c
>   CC       netdev.pb-c.o
>   LINK     protobuf-lib.o
>   GEN      syscall-x86-64.S
>   CC       syscall-x86-64.o
> syscall-common-x86-64.S: Assembler messages:
> syscall-common-x86-64.S:13: Error: bad register name `%rcx'
> make[1]: *** [syscall-x86-64.o] Error 1
> make: *** [pie] Error 2
> 
> 
> thanks
> Rajeev
> 
> -----Original Message-----
> From: Serge Hallyn [mailto:serge.hallyn-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org]
> Sent: Tuesday, August 21, 2012 3:04 AM
> To: Muralidhar, Rajeev D
> Cc: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> Subject: Re: Linux C/R: VNC server/Xterm checkpoint/recovery
> 
> See http://criu.org/Main_Page
> 
> Quoting Muralidhar, Rajeev D (rajeev.d.muralidhar-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org):
> > Hi,
> > 
> > Any help on this? 
> > 
> > Thanks
> > Rajeev
> > 
> > 
> > -----Original Message-----
> > From: containers-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org 
> > [mailto:containers-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org] On Behalf Of 
> > Muralidhar, Rajeev D
> > Sent: Tuesday, August 14, 2012 4:00 PM
> > To: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> > Subject: Linux C/R: VNC server/Xterm checkpoint/recovery
> > 
> > HI all,
> > 
> > I am a newbie to Linux C/R. Can someone please tell me if I can checkpoint and restart VNC sessions with Linux C/R? what is the easiest way to test this out? Also, if the VNC session was running Xterms, will they be restored with Linux C/R? 
> > 
> > Thanks,
> > Rajeev
> > 
> > _______________________________________________
> > Containers mailing list
> > Containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> > https://lists.linuxfoundation.org/mailman/listinfo/containers
> > _______________________________________________
> > Containers mailing list
> > Containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> > https://lists.linuxfoundation.org/mailman/listinfo/containers
> _______________________________________________
> Containers mailing list
> Containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> https://lists.linuxfoundation.org/mailman/listinfo/containers