From: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, x86@kernel.org,
yrl.pp-manager.tt@hitachi.com,
Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>,
Avi Kivity <avi@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Subject: [RFC v2 PATCH 16/21] KVM: vmx: Add definitions PIN_BASED_PREEMPTION_TIMER
Date: Thu, 06 Sep 2012 20:28:43 +0900 [thread overview]
Message-ID: <20120906112843.13320.47223.stgit@kvmdev> (raw)
In-Reply-To: <20120906112718.13320.8231.stgit@kvmdev>
Add some definitions to use PIN_BASED_PREEMPTION_TIMER.
When PIN_BASED_PREEMPTION_TIMER is enabled, the guest will exit
with reason=EXIT_REASON_PREEMPTION_TIMER when the counter specified in
VMX_PREEMPTION_TIMER_VALUE becomes 0.
This patch also adds a dummy handler for EXIT_REASON_PREEMPTION_TIMER,
which just goes back to VM execution soon.
These are currently intended only to be used with avoid entering the
guest on a slave CPU when vmx_prevent_run(vcpu, 1) is called.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
---
arch/x86/include/asm/vmx.h | 3 +++
arch/x86/kvm/trace.h | 1 +
arch/x86/kvm/vmx.c | 7 +++++++
3 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 74fcb96..6899aaa 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -66,6 +66,7 @@
#define PIN_BASED_EXT_INTR_MASK 0x00000001
#define PIN_BASED_NMI_EXITING 0x00000008
#define PIN_BASED_VIRTUAL_NMIS 0x00000020
+#define PIN_BASED_PREEMPTION_TIMER 0x00000040
#define VM_EXIT_SAVE_DEBUG_CONTROLS 0x00000002
#define VM_EXIT_HOST_ADDR_SPACE_SIZE 0x00000200
@@ -196,6 +197,7 @@ enum vmcs_field {
GUEST_INTERRUPTIBILITY_INFO = 0x00004824,
GUEST_ACTIVITY_STATE = 0X00004826,
GUEST_SYSENTER_CS = 0x0000482A,
+ VMX_PREEMPTION_TIMER_VALUE = 0x0000482E,
HOST_IA32_SYSENTER_CS = 0x00004c00,
CR0_GUEST_HOST_MASK = 0x00006000,
CR4_GUEST_HOST_MASK = 0x00006002,
@@ -280,6 +282,7 @@ enum vmcs_field {
#define EXIT_REASON_APIC_ACCESS 44
#define EXIT_REASON_EPT_VIOLATION 48
#define EXIT_REASON_EPT_MISCONFIG 49
+#define EXIT_REASON_PREEMPTION_TIMER 52
#define EXIT_REASON_WBINVD 54
#define EXIT_REASON_XSETBV 55
#define EXIT_REASON_INVPCID 58
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 6081be7..fc350f3 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -218,6 +218,7 @@ TRACE_EVENT(kvm_apic,
{ EXIT_REASON_APIC_ACCESS, "APIC_ACCESS" }, \
{ EXIT_REASON_EPT_VIOLATION, "EPT_VIOLATION" }, \
{ EXIT_REASON_EPT_MISCONFIG, "EPT_MISCONFIG" }, \
+ { EXIT_REASON_PREEMPTION_TIMER, "PREEMPTION_TIMER" }, \
{ EXIT_REASON_WBINVD, "WBINVD" }
#define SVM_EXIT_REASONS \
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6dc59c8..2130cbd 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4456,6 +4456,12 @@ static int handle_external_interrupt(struct kvm_vcpu *vcpu)
return 1;
}
+static int handle_preemption_timer(struct kvm_vcpu *vcpu)
+{
+ /* Nothing */
+ return 1;
+}
+
static int handle_triple_fault(struct kvm_vcpu *vcpu)
{
vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
@@ -5768,6 +5774,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
[EXIT_REASON_VMON] = handle_vmon,
[EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
+ [EXIT_REASON_PREEMPTION_TIMER] = handle_preemption_timer,
[EXIT_REASON_WBINVD] = handle_wbinvd,
[EXIT_REASON_XSETBV] = handle_xsetbv,
[EXIT_REASON_TASK_SWITCH] = handle_task_switch,
next prev parent reply other threads:[~2012-09-06 11:33 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 11:27 [RFC v2 PATCH 00/21] KVM: x86: CPU isolation and direct interrupts delivery to guests Tomoki Sekiyama
2012-09-06 11:27 ` [RFC v2 PATCH 01/21] x86: Split memory hotplug function from cpu_up() as cpu_memory_up() Tomoki Sekiyama
2012-09-06 11:31 ` Avi Kivity
2012-09-06 11:32 ` Avi Kivity
2012-09-06 11:27 ` [RFC v2 PATCH 02/21] x86: Add a facility to use offlined CPUs as slave CPUs Tomoki Sekiyama
2012-09-06 11:27 ` [RFC v2 PATCH 03/21] x86: Support hrtimer on " Tomoki Sekiyama
2012-09-06 11:27 ` [RFC v2 PATCH 04/21] x86: Avoid RCU warnings " Tomoki Sekiyama
2012-09-20 17:34 ` Paul E. McKenney
2012-09-28 8:10 ` Tomoki Sekiyama
2012-09-06 11:27 ` [RFC v2 PATCH 05/21] KVM: Enable/Disable virtualization on slave CPUs are activated/dying Tomoki Sekiyama
2012-09-06 11:27 ` [RFC v2 PATCH 06/21] KVM: Add facility to run guests on slave CPUs Tomoki Sekiyama
2012-09-06 11:27 ` [RFC v2 PATCH 07/21] KVM: handle page faults of slave guests on online CPUs Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 08/21] KVM: Add KVM_GET_SLAVE_CPU and KVM_SET_SLAVE_CPU to vCPU ioctl Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 09/21] KVM: Go back to online CPU on VM exit by external interrupt Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 10/21] KVM: proxy slab operations for slave CPUs on online CPUs Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 11/21] KVM: no exiting from guest when slave CPU halted Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 12/21] x86/apic: Enable external interrupt routing to slave CPUs Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 13/21] x86/apic: IRQ vector remapping on slave for " Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 14/21] KVM: Directly handle interrupts by guests without VM EXIT on " Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 15/21] KVM: add tracepoint on enabling/disabling direct interrupt delivery Tomoki Sekiyama
2012-09-06 11:28 ` Tomoki Sekiyama [this message]
2012-09-06 11:28 ` [RFC v2 PATCH 17/21] KVM: add kvm_arch_vcpu_prevent_run to prevent VM ENTER when NMI is received Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 18/21] KVM: route assigned devices' MSI/MSI-X directly to guests on slave CPUs Tomoki Sekiyama
2012-09-06 11:28 ` [RFC v2 PATCH 19/21] KVM: Enable direct EOI for directly routed interrupts to guests Tomoki Sekiyama
2012-09-06 11:29 ` [RFC v2 PATCH 20/21] KVM: Pass-through local APIC timer of on slave CPUs to guest VM Tomoki Sekiyama
2012-09-06 11:29 ` [RFC v2 PATCH 21/21] x86: request TLB flush to slave CPU using NMI Tomoki Sekiyama
2012-09-06 11:46 ` [RFC v2 PATCH 00/21] KVM: x86: CPU isolation and direct interrupts delivery to guests Avi Kivity
2012-09-07 8:26 ` Jan Kiszka
2012-09-10 11:36 ` Tomoki Sekiyama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120906112843.13320.47223.stgit@kvmdev \
--to=tomoki.sekiyama.qu@hitachi.com \
--cc=avi@redhat.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mtosatti@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yrl.pp-manager.tt@hitachi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.