All of lore.kernel.org
 help / color / mirror / Atom feed
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA
Date: Tue, 11 Sep 2012 11:47:48 +0200	[thread overview]
Message-ID: <20120911094748.GS18243@pengutronix.de> (raw)
In-Reply-To: <1346843175-4166-1-git-send-email-gcembed@gmail.com>

Hi Javier,

Since you worked in this area recently, can I have your Ack on this?

As a side note: Please be prepared that all this should be removed in
the not-so-far future. It would be good if you start converting your
boards to devicetree soon. You may be doing so internally already, I
don't know.

Thanks
 Sascha

On Wed, Sep 05, 2012 at 01:06:15PM +0200, Ga?tan Carlier wrote:
> Hi,
> This is to prepare addition of m2m-emmapp driver otherwise
>  IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor
> is needed.
> 
> IMX_HAVE_PLATFORM_MX2_EMMA define has been added.
> 
> Changes since v1:
>  - Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform
>    due to pending patch in linux-media tree that will call
>    imx27_add_mx2_emmaprp().
> 
> Signed-off-by: Ga?tan Carlier <gcembed@gmail.com>
> ---
>  arch/arm/mach-imx/Kconfig                       |    1 +
>  arch/arm/mach-imx/devices-imx27.h               |    4 ++-
>  arch/arm/plat-mxc/devices/Kconfig               |    3 ++
>  arch/arm/plat-mxc/devices/Makefile              |    1 +
>  arch/arm/plat-mxc/devices/platform-mx2-camera.c |   17 ---------
>  arch/arm/plat-mxc/devices/platform-mx2-emma.c   |   41 +++++++++++++++++++++++
>  arch/arm/plat-mxc/include/mach/devices-common.h |    9 ++++-
>  7 files changed, 57 insertions(+), 19 deletions(-)
>  create mode 100644 arch/arm/plat-mxc/devices/platform-mx2-emma.c
> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index afd542a..c2984d7 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -322,6 +322,7 @@ config MACH_IMX27_VISSTRIM_M10
>  	select IMX_HAVE_PLATFORM_IMX_SSI
>  	select IMX_HAVE_PLATFORM_IMX_UART
>  	select IMX_HAVE_PLATFORM_MX2_CAMERA
> +	select IMX_HAVE_PLATFORM_MX2_EMMA
>  	select IMX_HAVE_PLATFORM_MXC_EHCI
>  	select IMX_HAVE_PLATFORM_MXC_MMC
>  	select LEDS_GPIO_REGISTER
> diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
> index 0482293..d8eb4a0 100644
> --- a/arch/arm/mach-imx/devices-imx27.h
> +++ b/arch/arm/mach-imx/devices-imx27.h
> @@ -54,8 +54,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
>  extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
>  #define imx27_add_mx2_camera(pdata)	\
>  	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
> +
> +extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
>  #define imx27_add_mx2_emmaprp()	\
> -	imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
> +	imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
>  
>  extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
>  #define imx27_add_mxc_ehci_otg(pdata)	\
> diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
> index 6b46cee..96feef7 100644
> --- a/arch/arm/plat-mxc/devices/Kconfig
> +++ b/arch/arm/plat-mxc/devices/Kconfig
> @@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA
>  config IMX_HAVE_PLATFORM_MX2_CAMERA
>  	bool
>  
> +config IMX_HAVE_PLATFORM_MX2_EMMA
> +	bool
> +
>  config IMX_HAVE_PLATFORM_MXC_EHCI
>  	bool
>  
> diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
> index 76f3195..7292c1f 100644
> --- a/arch/arm/plat-mxc/devices/Makefile
> +++ b/arch/arm/plat-mxc/devices/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
> +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
> diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c
> index 11eace9..11c688f 100644
> --- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c
> +++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c
> @@ -63,20 +63,3 @@ struct platform_device *__init imx_add_mx2_camera(
>  			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
>  }
>  
> -struct platform_device *__init imx_add_mx2_emmaprp(
> -		const struct imx_mx2_camera_data *data)
> -{
> -	struct resource res[] = {
> -		{
> -			.start = data->iobaseemmaprp,
> -			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
> -			.flags = IORESOURCE_MEM,
> -		}, {
> -			.start = data->irqemmaprp,
> -			.end = data->irqemmaprp,
> -			.flags = IORESOURCE_IRQ,
> -		},
> -	};
> -	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
> -			res, 2, NULL, 0, DMA_BIT_MASK(32));
> -}
> diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/plat-mxc/devices/platform-mx2-emma.c
> new file mode 100644
> index 0000000..a51749a
> --- /dev/null
> +++ b/arch/arm/plat-mxc/devices/platform-mx2-emma.c
> @@ -0,0 +1,41 @@
> +/*
> + * Copyright (C) 2010 Pengutronix
> + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +#include <mach/hardware.h>
> +#include <mach/devices-common.h>
> +
> +#define imx_mx2_emmaprp_data_entry_single(soc)				\
> +	{								\
> +		.iobase = soc ## _EMMAPRP_BASE_ADDR,			\
> +		.iosize = SZ_32,					\
> +		.irq = soc ## _INT_EMMAPRP,				\
> +	}
> +
> +#ifdef CONFIG_SOC_IMX27
> +const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
> +	imx_mx2_emmaprp_data_entry_single(MX27);
> +#endif /* ifdef CONFIG_SOC_IMX27 */
> +
> +struct platform_device *__init imx_add_mx2_emmaprp(
> +		const struct imx_mx2_emma_data *data)
> +{
> +	struct resource res[] = {
> +		{
> +			.start = data->iobase,
> +			.end = data->iobase + data->iosize - 1,
> +			.flags = IORESOURCE_MEM,
> +		}, {
> +			.start = data->irq,
> +			.end = data->irq,
> +			.flags = IORESOURCE_IRQ,
> +		},
> +	};
> +	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
> +			res, 2, NULL, 0, DMA_BIT_MASK(32));
> +}
> +
> diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
> index 762780c..2117072 100644
> --- a/arch/arm/plat-mxc/include/mach/devices-common.h
> +++ b/arch/arm/plat-mxc/include/mach/devices-common.h
> @@ -229,8 +229,15 @@ struct imx_mx2_camera_data {
>  struct platform_device *__init imx_add_mx2_camera(
>  		const struct imx_mx2_camera_data *data,
>  		const struct mx2_camera_platform_data *pdata);
> +
> +
> +struct imx_mx2_emma_data {
> +	resource_size_t iobase;
> +	resource_size_t iosize;
> +	resource_size_t irq;
> +};
>  struct platform_device *__init imx_add_mx2_emmaprp(
> -		const struct imx_mx2_camera_data *data);
> +		const struct imx_mx2_emma_data *data);
>  
>  #include <mach/mxc_ehci.h>
>  struct imx_mxc_ehci_data {
> -- 
> 1.7.7.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2012-09-11  9:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-05 11:06 [PATCH v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA Gaëtan Carlier
2012-09-11  9:47 ` Sascha Hauer [this message]
2012-09-11 11:13   ` javier Martin
2012-09-11 11:17     ` Sascha Hauer
2012-10-09 13:01       ` Gaëtan Carlier
2012-10-10  8:34         ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120911094748.GS18243@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.