From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Tue, 11 Sep 2012 19:06:08 +0000 Subject: Re: [lm-sensors] [PATCH] sensors: add humidity data to output of sensors command Message-Id: <20120911190608.GA15811@roeck-us.net> List-Id: References: <4FE063E1.5050301@gmail.com> In-Reply-To: <4FE063E1.5050301@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Tue, Sep 11, 2012 at 09:04:00AM +0200, Jean Delvare wrote: > On Mon, 10 Sep 2012 21:17:27 -0700, Guenter Roeck wrote: > > Hi Jean, > > > > On Tue, Jun 19, 2012 at 11:34:57AM +0000, Iain Paton wrote: > > > Testing out a humidity sensor recently and was thinking the driver wasn't working somehow. > > > Discovered instead that the driver works fine, but the sensors command was ignoring the > > > humidity data. > > > This adds output of humidity data for sensors that support it. > > > > > > Please consider applying it. > > > > > > Thanks, > > > Iain > > > > > mind if I apply this patch to lm-sensors ? > > Please do, I could never find the time to review or test it :( > Cleaned up a bit, tested, and committed. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors