From: Fabio Baltieri <fabio.baltieri@gmail.com>
To: Oliver Hartkopp <socketcan@hartkopp.net>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Wolfgang Grandegger <wg@grandegger.com>,
linux-kernel@vger.kernel.org, linux-can@vger.kernel.org
Subject: Re: [PATCH v4] can: rename LED trigger name on netdev renames
Date: Tue, 11 Sep 2012 23:04:34 +0200 [thread overview]
Message-ID: <20120911210434.GA3895@gmail.com> (raw)
In-Reply-To: <20120910200648.GB546@vandijck-laurijssen.be>
Hi Kurt,
On Mon, Sep 10, 2012 at 10:06:48PM +0200, Kurt Van Dijck wrote:
> can: rename LED trigger name on netdev renames
>
> The LED trigger name for CAN devices is based on the initial
> CAN device name, but does never change. The LED trigger name
> is not guaranteed to be unique in case of hotplugging CAN devices.
>
> This patch tries to address this problem by modifying the
> LED trigger name according to the CAN device name when
> the latter changes.
>
> v1 - Kurt Van Dijck
> v2 - Fabio Baltieri
> - remove rename blocking if trigger is bound
> - use led-subsystem function for the actual rename (still WiP)
> - call init/exit functions from dev.c
> v3 - Kurt Van Dijck
> - safe operation for non-candev based devices (vcan, slcan)
> based on earlier patch
> v4 - Kurt Van Dijck
> - trivial patch mistakes fixed
Well done, I'm testing the last patches (my can-leds-devel branch on
github) and seems to work good (tested rename, disconnect-reconnect,
vcan rename, rename from udev rule).
Now I think we just have to wait for Bryan for the LED rename patch.
Fabio
--
Fabio Baltieri
next prev parent reply other threads:[~2012-09-11 21:03 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 19:20 [PATCH can-next v3 1/2] can: add tx/rx LED trigger support Fabio Baltieri
2012-07-30 19:20 ` [PATCH can-next v3 2/2] can: flexcan: add " Fabio Baltieri
2012-07-30 21:17 ` [PATCH can-next v3 1/2] can: add tx/rx " Marc Kleine-Budde
2012-07-31 6:57 ` Fabio Baltieri
2012-07-31 7:10 ` Marc Kleine-Budde
2012-07-31 11:57 ` Fabio Baltieri
2012-07-31 12:00 ` Marc Kleine-Budde
2012-07-31 22:05 ` [PATCH can-next v4] " Fabio Baltieri
2012-08-01 9:36 ` Marc Kleine-Budde
2012-08-01 10:07 ` Marc Kleine-Budde
2012-08-01 10:30 ` Fabio Baltieri
2012-08-01 11:37 ` Marc Kleine-Budde
2012-08-01 11:49 ` [PATCH can-next v5 1/2] " Fabio Baltieri
2012-08-01 11:49 ` [PATCH can-next v5 2/2] can: flexcan: add " Fabio Baltieri
2012-08-01 11:53 ` Marc Kleine-Budde
2012-08-01 12:24 ` Fabio Baltieri
2012-08-01 12:30 ` Marc Kleine-Budde
2012-08-01 21:02 ` Marc Kleine-Budde
2012-08-01 11:59 ` [PATCH can-next v5 1/2] can: add tx/rx " Marc Kleine-Budde
2012-08-01 12:06 ` Oliver Hartkopp
2012-08-01 12:18 ` Marc Kleine-Budde
2012-08-01 18:21 ` [PATCH can-next v6] " Fabio Baltieri
2012-08-01 21:00 ` Marc Kleine-Budde
2012-08-01 22:38 ` Fabio Baltieri
2012-08-01 21:05 ` Oliver Hartkopp
2012-08-24 5:10 ` Kurt Van Dijck
2012-08-24 11:28 ` Marc Kleine-Budde
2012-08-24 12:42 ` Kurt Van Dijck
2012-08-24 12:42 ` Kurt Van Dijck
2012-08-24 22:01 ` Fabio Baltieri
2012-08-25 20:25 ` Kurt Van Dijck
2012-09-03 12:40 ` Marc Kleine-Budde
2012-09-03 18:13 ` Kurt Van Dijck
2012-09-03 18:29 ` Fabio Baltieri
2012-09-03 20:54 ` Oliver Hartkopp
2012-09-04 7:11 ` Kurt Van Dijck
2012-09-04 9:29 ` [PATCH] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-06 18:59 ` Fabio Baltieri
2012-09-06 19:31 ` Oliver Hartkopp
2012-09-06 20:46 ` Fabio Baltieri
2012-09-07 7:19 ` Kurt Van Dijck
2012-09-09 16:17 ` [PATCH v2] " Fabio Baltieri
2012-09-10 14:25 ` [PATCH] can: export a safe netdev_priv wrapper for candev Kurt Van Dijck
2012-09-10 14:25 ` Kurt Van Dijck
2012-09-10 18:22 ` Oliver Hartkopp
2012-09-10 18:29 ` Fabio Baltieri
2012-09-10 19:55 ` [PATCH v2] " Kurt Van Dijck
2012-09-10 14:28 ` [PATCH v3] can: rename LED trigger name on netdev renames Kurt Van Dijck
2012-09-10 14:28 ` Kurt Van Dijck
2012-09-10 18:25 ` Oliver Hartkopp
2012-09-10 18:40 ` Fabio Baltieri
2012-09-10 19:01 ` Oliver Hartkopp
2012-09-10 20:08 ` Kurt Van Dijck
2012-09-11 5:42 ` Oliver Hartkopp
2012-09-11 7:13 ` Fabio Baltieri
2012-09-12 7:22 ` Kurt Van Dijck
2012-09-12 7:22 ` Kurt Van Dijck
2012-09-11 8:05 ` Kurt Van Dijck
2012-09-10 20:06 ` [PATCH v4] " Kurt Van Dijck
2012-09-11 21:04 ` Fabio Baltieri [this message]
2012-09-04 20:15 ` [PATCH can-next v6] can: add tx/rx LED trigger support Fabio Baltieri
2012-09-06 10:33 ` Kurt Van Dijck
2012-09-06 11:17 ` Fabio Baltieri
2012-09-06 15:11 ` Kurt Van Dijck
2012-09-06 20:57 ` Fabio Baltieri
2012-09-07 7:04 ` Kurt Van Dijck
2012-09-07 18:59 ` Fabio Baltieri
2012-07-31 8:46 ` [PATCH can-next v3 1/2] " Wolfgang Grandegger
2012-07-31 10:12 ` Marc Kleine-Budde
2012-07-31 11:55 ` Fabio Baltieri
2012-07-31 12:14 ` Fabio Baltieri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120911210434.GA3895@gmail.com \
--to=fabio.baltieri@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.