All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Christoph Fritz <chf.fritz@googlemail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] net: add nameserver IPs to kernel-parameter ip=
Date: Sat, 22 Sep 2012 13:43:46 +0200	[thread overview]
Message-ID: <20120922114346.GT26553@game.jcrosoft.org> (raw)
In-Reply-To: <1348311530.3917.5.camel@mars>

On 12:58 Sat 22 Sep     , Christoph Fritz wrote:
> Kernel-parameter "ip=" is used to assign network configuration.
> With linux kernel 3.7 it is also possible to set nameserver IPs.
> 
> This patch adds two new options (nameserver0 and nameserver1) to
> ethernet device parameter. It also updates defaultenv version 1.
defaultenv-2 mandatory

v1 is for fix only


> 
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
>  defaultenv/bin/boot |    4 +++-
>  defaultenv/config   |    2 ++
>  net/eth.c           |    2 ++
>  3 files changed, 7 insertions(+), 1 deletions(-)
> 
> diff --git a/defaultenv/bin/boot b/defaultenv/bin/boot
> index 4e2056e..d5b5844 100644
> --- a/defaultenv/bin/boot
> +++ b/defaultenv/bin/boot
> @@ -61,7 +61,9 @@ if [ x$ip = xdhcp -o ]; then
>  elif [ x$ip = xnone ]; then
>  	bootargs="$bootargs ip=none"
>  else
> -	bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask::eth0:"
> +	bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:"
> +	bootargs="$bootargs$eth0.netmask::eth0::"
> +	bootargs="$bootargs$eth0.nameserver0:$eth0.nameserver1"
>  fi
>  
>  
> diff --git a/defaultenv/config b/defaultenv/config
> index 391ba47..6596753 100644
> --- a/defaultenv/config
> +++ b/defaultenv/config
> @@ -18,6 +18,8 @@ global.dhcp.vendor_id=barebox
>  #eth0.netmask=a.b.c.d
>  #eth0.serverip=a.b.c.d
>  #eth0.gateway=a.b.c.d
> +#eth0.nameserver0=a.b.c.d
> +#eth0.nameserver1=a.b.c.d
>  
>  # can be either 'tftp', 'nfs', 'nand', 'nor' or 'disk'
>  kernel_loc=tftp
> diff --git a/net/eth.c b/net/eth.c
> index d42a72d..bb8157b 100644
> --- a/net/eth.c
> +++ b/net/eth.c
> @@ -229,6 +229,8 @@ int eth_register(struct eth_device *edev)
>  	dev_add_param(dev, "gateway", eth_set_ipaddr, NULL, 0);
>  	dev_add_param(dev, "netmask", eth_set_ipaddr, NULL, 0);
>  	dev_add_param(dev, "serverip", eth_set_ipaddr, NULL, 0);
> +	dev_add_param(dev, "nameserver0", eth_set_ipaddr, NULL, 0);
> +	dev_add_param(dev, "nameserver1", eth_set_ipaddr, NULL, 0);
this is done via net as the nameserver is not interface specific

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-09-22 11:46 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-22 10:58 [PATCH 1/2] net: add nameserver IPs to kernel-parameter ip= Christoph Fritz
2012-09-22 11:43 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-22 15:41   ` [PATCH 1/2][v2] " Christoph Fritz
2012-09-22 18:24     ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-22 18:27     ` [PATCH 1/1] net: add multiple nameserver support Jean-Christophe PLAGNIOL-VILLARD
2012-09-22 19:25       ` Christoph Fritz
2012-09-22 20:16         ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-23 12:11           ` [PATCH] " Christoph Fritz
2012-09-23 13:29             ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-23 13:57               ` Christoph Fritz
2012-12-10 11:23                 ` Christoph Fritz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120922114346.GT26553@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=chf.fritz@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.