From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030254Ab2I1TB7 (ORCPT ); Fri, 28 Sep 2012 15:01:59 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:64534 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030226Ab2I1TBy (ORCPT ); Fri, 28 Sep 2012 15:01:54 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Greg KH , alan@lxorguk.ukuu.org.uk, Klaus Falkner , Nicolas Ferre , Alan Stern Subject: [ 161/262] USB: ohci-at91: fix PIO handling in relation with number of ports Date: Fri, 28 Sep 2012 11:51:30 -0700 Message-Id: <20120928183016.976186282@linuxfoundation.org> X-Mailer: git-send-email 1.7.10.1.362.g242cab3 In-Reply-To: <20120928182957.993484211@linuxfoundation.org> References: <20120928182957.993484211@linuxfoundation.org> User-Agent: quilt/0.60-2.1.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Greg KH 3.5-stable review patch. If anyone has any objections, please let me know. ------------------ From: Nicolas Ferre commit 6fffb77c8393151b0cf8cef1b9c2ba90587dd2e8 upstream. If the number of ports present on the SoC/board is not the maximum and that the platform data is not filled with all data, there is an easy way to mess the PIO setup for this interface. This quick fix addresses mis-configuration in USB host platform data that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: change maximum number of ports) that did not modified the associatd board files. Reported-by: Klaus Falkner Signed-off-by: Nicolas Ferre Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-at91.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_p if (pdata) { at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i];