From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030317Ab2I1TCZ (ORCPT ); Fri, 28 Sep 2012 15:02:25 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:63006 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030303Ab2I1TCU (ORCPT ); Fri, 28 Sep 2012 15:02:20 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Greg KH , alan@lxorguk.ukuu.org.uk, Manoj Iyer , Sarah Sharp Subject: [ 169/262] xhci: Recognize USB 3.0 devices as superspeed at powerup Date: Fri, 28 Sep 2012 11:51:38 -0700 Message-Id: <20120928183017.964859820@linuxfoundation.org> X-Mailer: git-send-email 1.7.10.1.362.g242cab3 In-Reply-To: <20120928182957.993484211@linuxfoundation.org> References: <20120928182957.993484211@linuxfoundation.org> User-Agent: quilt/0.60-2.1.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Greg KH 3.5-stable review patch. If anyone has any objections, please let me know. ------------------ From: Manoj Iyer commit 29d214576f936db627ff62afb9ef438eea18bcd2 upstream. On Intel Panther Point chipset USB 3.0 devices show up as high-speed devices on powerup, but after an s3 cycle they are correctly recognized as SuperSpeed. At powerup switch the port to xHCI so that USB 3.0 devices are correctly recognized. BugLink: http://bugs.launchpad.net/bugs/1000424 This patch should be backported to kernels as old as 3.0, that contain commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Manoj Iyer Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -897,9 +897,10 @@ static void __devinit quirk_usb_handoff_ /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any