From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lrg@ti.com>
Subject: ASoC updates for 3.7
Date: Mon, 1 Oct 2012 11:26:13 +0100 [thread overview]
Message-ID: <20121001102613.GF4360@opensource.wolfsonmicro.com> (raw)
The following changes since commit ddfb43f3881edb47aa0083651ad31983cdc42c33:
Merge tag 'v3.6-rc6' into for-3.7 (2012-09-22 11:26:27 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-3.7
for you to fetch changes up to 9911f7f7562a25381eff93fdc660a4a3b4c0f6e0:
ASoC: codecs: Add DA9055 codec driver (2012-09-28 14:21:54 +0100)
----------------------------------------------------------------
ASoC: Additional updates for v3.7
A couple more updates for 3.7, enhancements to the ux500 and wm2000
drivers, a new driver for DA9055 and the support for regulator bypass
mode. With the exception of the DA9055 this has all had a chance to
soak in -next (the driver was added on Friday so should be in -next
today).
----------------------------------------------------------------
Ashish Chavan (1):
ASoC: codecs: Add DA9055 codec driver
Charles Keepax (1):
ASoC: wm5110: Adding missing volume update bits
Daniel Mack (1):
ALSA: ASoC: add DT bindings for CS4271
Fabio Estevam (2):
ASoC: cs4270: Remove mono support
ASoC: eukrea-tlv320: Convert it to platform driver
Lee Jones (7):
ASoC: Ux500: Move MSP pinctrl setup into the MSP driver
ASoC: Ux500: Enable MOP500 driver for Device Tree
ASoC: Ux500: Enable ux500 MSP driver for Device Tree
ASoC: codecs: Enable AB8500 CODEC for Device Tree
ASoC: Ux500: Minor coding layout changes
Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings
Documentation: Define the MSP Driver Device Tree bindings
Mark Brown (22):
regulator: core: Support bypass mode
regulator: core: Provide regmap get/set bypass operations
regulator: arizona-ldo: Support get/set bypass
regulator: arizona-micsupp: Support get/set bypass
regulator: wm831x-ldo: Add bypass support
extcon: arizona: Use bypass mode for MICVDD
ASoC: wm2000: Convert to devm_regmap_init_i2c()
ASoC: wm2000: Add regulator support
Merge remote-tracking branch 'asoc/topic/ux500' into for-3.7
Merge tag 'bypass' of git://git.kernel.org/.../broonie/regulator into for-3.7
ASoC: dapm: Allow regulators to bypass as well as disable when idle
ASoC: wm5102: Enable bypass mode for MICVDD
ASoC: wm5110: Enable bypass mode for MICVDD
ASoC: wm0010: Allow slow GPIO for reset
ASoC: wm0010: Don't check if reset GPIO is defined when removing
ASoC: wm0010: Initialise chip state before we register the interrupt
ASoC: arizona: Add more DSP options for mixer input muxes
ASoC: arizona: Add more clock rates
ASoC: wm5110: Rename EPOUT to HPOUT3
ASoC: wm5110: Add AEC loopback support
ASoC: wm5110: Add OUT3R support
ASoC: wm_hubs: Ensure volume updates are handled during class W startup
Documentation/ABI/testing/sysfs-class-regulator | 21 +
Documentation/devicetree/bindings/sound/cs4271.txt | 36 +
.../devicetree/bindings/sound/ux500-mop500.txt | 39 +
.../devicetree/bindings/sound/ux500-msp.txt | 43 +
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 1 +
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 1 +
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 1 +
arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c | 1 +
arch/arm/mach-ux500/board-mop500-msp.c | 79 +-
arch/arm/mach-ux500/include/mach/msp.h | 2 -
drivers/extcon/extcon-arizona.c | 5 +
drivers/regulator/arizona-ldo1.c | 4 +
drivers/regulator/arizona-micsupp.c | 5 +
drivers/regulator/core.c | 126 ++
drivers/regulator/wm831x-ldo.c | 8 +
include/linux/mfd/abx500/ab8500-codec.h | 6 +-
include/linux/regulator/consumer.h | 8 +
include/linux/regulator/driver.h | 14 +
include/linux/regulator/machine.h | 2 +
include/sound/da9055.h | 33 +
include/sound/soc-dapm.h | 3 +
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/ab8500-codec.c | 81 ++
sound/soc/codecs/arizona.c | 42 +
sound/soc/codecs/arizona.h | 2 +-
sound/soc/codecs/cs4270.c | 4 +-
sound/soc/codecs/cs4271.c | 24 +-
sound/soc/codecs/da9055.c | 1510 ++++++++++++++++++++
sound/soc/codecs/wm0010.c | 18 +-
sound/soc/codecs/wm2000.c | 60 +-
sound/soc/codecs/wm5102.c | 2 +-
sound/soc/codecs/wm5110.c | 79 +-
sound/soc/codecs/wm_hubs.c | 5 +
sound/soc/fsl/eukrea-tlv320.c | 37 +-
sound/soc/soc-dapm.c | 23 +-
sound/soc/ux500/mop500.c | 47 +-
sound/soc/ux500/ux500_msp_dai.c | 6 +
sound/soc/ux500/ux500_msp_i2s.c | 89 +-
sound/soc/ux500/ux500_msp_i2s.h | 8 +-
40 files changed, 2307 insertions(+), 174 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/cs4271.txt
create mode 100644 Documentation/devicetree/bindings/sound/ux500-mop500.txt
create mode 100644 Documentation/devicetree/bindings/sound/ux500-msp.txt
create mode 100644 include/sound/da9055.h
create mode 100644 sound/soc/codecs/da9055.c
next reply other threads:[~2012-10-01 10:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-01 10:26 Mark Brown [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-11-21 3:12 ASoC updates for 3.7 Mark Brown
2012-11-21 6:32 ` Takashi Iwai
2012-11-13 6:45 Mark Brown
2012-11-13 7:00 ` Takashi Iwai
2012-10-17 11:27 Mark Brown
2012-10-17 12:12 ` Takashi Iwai
2012-09-22 15:50 Mark Brown
2012-09-22 16:39 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121001102613.GF4360@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.