All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Duyck <alexander.h.duyck@intel.com>
To: konrad.wilk@oracle.com, tglx@linutronix.de, mingo@redhat.com,
	hpa@zytor.com, rob@landley.net, akpm@linux-foundation.org,
	joerg.roedel@amd.com, bhelgaas@google.com, shuahkhan@gmail.com
Cc: linux-kernel@vger.kernel.org, devel@linuxdriverproject.org,
	x86@kernel.org
Subject: [RFC PATCH 3/7] swiotlb: Make io_tlb_overflow_buffer a physical address
Date: Wed, 03 Oct 2012 17:38:58 -0700	[thread overview]
Message-ID: <20121004003858.5016.67965.stgit@gitlad.jf.intel.com> (raw)
In-Reply-To: <20121004002113.5016.66913.stgit@gitlad.jf.intel.com>

This change makes it so that we can avoid virt_to_phys overhead when using the
io_tlb_overflow_buffer.  My original plan was to completely remove the value
and replace it with a constant but I had seen that there were recent patches
that stated this couldn't be done until all device drivers that depended on
that functionality be updated.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---

 lib/swiotlb.c |   61 ++++++++++++++++++++++++++++++++-------------------------
 1 files changed, 34 insertions(+), 27 deletions(-)

diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 02abb72..62848fb 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -70,7 +70,7 @@ static unsigned long io_tlb_nslabs;
  */
 static unsigned long io_tlb_overflow = 32*1024;
 
-static void *io_tlb_overflow_buffer;
+phys_addr_t io_tlb_overflow_buffer;
 
 /*
  * This is a free list describing the number of free entries available from
@@ -138,6 +138,7 @@ void swiotlb_print_info(void)
 
 void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 {
+	void *v_overflow_buffer;
 	unsigned long i, bytes;
 
 	bytes = nslabs << IO_TLB_SHIFT;
@@ -146,6 +147,15 @@ void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 	io_tlb_start = __pa(tlb);
 
 	/*
+	 * Get the overflow emergency buffer
+	 */
+	v_overflow_buffer = alloc_bootmem_low_pages(PAGE_ALIGN(io_tlb_overflow));
+	if (!v_overflow_buffer)
+		panic("Cannot allocate SWIOTLB overflow buffer!\n");
+
+	io_tlb_overflow_buffer = __pa(v_overflow_buffer);
+
+	/*
 	 * Allocate and initialize the free list array.  This array is used
 	 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
 	 */
@@ -155,12 +165,6 @@ void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 	io_tlb_index = 0;
 	io_tlb_orig_addr = alloc_bootmem_pages(PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)));
 
-	/*
-	 * Get the overflow emergency buffer
-	 */
-	io_tlb_overflow_buffer = alloc_bootmem_low_pages(PAGE_ALIGN(io_tlb_overflow));
-	if (!io_tlb_overflow_buffer)
-		panic("Cannot allocate SWIOTLB overflow buffer!\n");
 	if (verbose)
 		swiotlb_print_info();
 }
@@ -250,6 +254,7 @@ int
 swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
 {
 	unsigned long i, bytes;
+	unsigned char *v_overflow_buffer;
 
 	bytes = nslabs << IO_TLB_SHIFT;
 
@@ -259,13 +264,23 @@ swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
 	memset(tlb, 0, bytes);
 
 	/*
+	 * Get the overflow emergency buffer
+	 */
+	v_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
+						     get_order(io_tlb_overflow));
+	if (!v_overflow_buffer)
+		goto cleanup2;
+
+	io_tlb_overflow_buffer = virt_to_phys(v_overflow_buffer);
+
+	/*
 	 * Allocate and initialize the free list array.  This array is used
 	 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
 	 */
 	io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
 	                              get_order(io_tlb_nslabs * sizeof(int)));
 	if (!io_tlb_list)
-		goto cleanup2;
+		goto cleanup3;
 
 	for (i = 0; i < io_tlb_nslabs; i++)
  		io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
@@ -276,18 +291,10 @@ swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
 				 get_order(io_tlb_nslabs *
 					   sizeof(phys_addr_t)));
 	if (!io_tlb_orig_addr)
-		goto cleanup3;
+		goto cleanup4;
 
 	memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(phys_addr_t));
 
-	/*
-	 * Get the overflow emergency buffer
-	 */
-	io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
-	                                          get_order(io_tlb_overflow));
-	if (!io_tlb_overflow_buffer)
-		goto cleanup4;
-
 	swiotlb_print_info();
 
 	late_alloc = 1;
@@ -295,13 +302,13 @@ swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
 	return 0;
 
 cleanup4:
-	free_pages((unsigned long)io_tlb_orig_addr,
-		   get_order(io_tlb_nslabs * sizeof(phys_addr_t)));
-	io_tlb_orig_addr = NULL;
-cleanup3:
 	free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
 	                                                 sizeof(int)));
 	io_tlb_list = NULL;
+cleanup3:
+	free_pages((unsigned long)v_overflow_buffer,
+		   get_order(io_tlb_overflow));
+	io_tlb_overflow_buffer = 0;
 cleanup2:
 	io_tlb_start = 0;
 	io_tlb_nslabs = 0;
@@ -310,11 +317,11 @@ cleanup2:
 
 void __init swiotlb_free(void)
 {
-	if (!io_tlb_overflow_buffer)
+	if (!io_tlb_orig_addr)
 		return;
 
 	if (late_alloc) {
-		free_pages((unsigned long)io_tlb_overflow_buffer,
+		free_pages((unsigned long)phys_to_virt(io_tlb_overflow_buffer),
 			   get_order(io_tlb_overflow));
 		free_pages((unsigned long)io_tlb_orig_addr,
 			   get_order(io_tlb_nslabs * sizeof(phys_addr_t)));
@@ -323,7 +330,7 @@ void __init swiotlb_free(void)
 		free_pages((unsigned long)phys_to_virt(io_tlb_start),
 			   get_order(io_tlb_nslabs << IO_TLB_SHIFT));
 	} else {
-		free_bootmem_late(__pa(io_tlb_overflow_buffer),
+		free_bootmem_late(io_tlb_overflow_buffer,
 				  PAGE_ALIGN(io_tlb_overflow));
 		free_bootmem_late(__pa(io_tlb_orig_addr),
 				  PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)));
@@ -694,7 +701,7 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 	map = map_single(dev, phys, size, dir);
 	if (!map) {
 		swiotlb_full(dev, size, dir, 1);
-		map = io_tlb_overflow_buffer;
+		return phys_to_dma(dev, io_tlb_overflow_buffer);
 	}
 
 	dev_addr = swiotlb_virt_to_bus(dev, map);
@@ -704,7 +711,7 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 	 */
 	if (!dma_capable(dev, dev_addr, size)) {
 		swiotlb_tbl_unmap_single(dev, map, size, dir);
-		dev_addr = swiotlb_virt_to_bus(dev, io_tlb_overflow_buffer);
+		return phys_to_dma(dev, io_tlb_overflow_buffer);
 	}
 
 	return dev_addr;
@@ -923,7 +930,7 @@ EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
 int
 swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
 {
-	return (dma_addr == swiotlb_virt_to_bus(hwdev, io_tlb_overflow_buffer));
+	return (dma_addr == phys_to_dma(hwdev, io_tlb_overflow_buffer));
 }
 EXPORT_SYMBOL(swiotlb_dma_mapping_error);
 


  parent reply	other threads:[~2012-10-04  0:39 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-04  0:38 [RFC PATCH 0/7] Improve swiotlb performance by using physical addresses Alexander Duyck
2012-10-04  0:38 ` [RFC PATCH 1/7] swiotlb: Instead of tracking the end of the swiotlb region just calculate it Alexander Duyck
2012-10-04 13:01   ` Konrad Rzeszutek Wilk
2012-10-04 15:54     ` Alexander Duyck
2012-10-04 16:31       ` Konrad Rzeszutek Wilk
2012-10-04  0:38 ` [RFC PATCH 2/7] swiotlb: Make io_tlb_start a physical address instead of a virtual address Alexander Duyck
2012-10-04 13:18   ` Konrad Rzeszutek Wilk
2012-10-04 17:11     ` Alexander Duyck
2012-10-04 17:19       ` Konrad Rzeszutek Wilk
2012-10-04 20:22         ` Alexander Duyck
2012-10-09 16:43           ` Konrad Rzeszutek Wilk
2012-10-09 19:11             ` Alexander Duyck
2012-10-04  0:38 ` Alexander Duyck [this message]
2012-10-04  0:39 ` [RFC PATCH 4/7] swiotlb: Return physical addresses when calling swiotlb_tbl_map_single Alexander Duyck
2012-10-04  0:39 ` [RFC PATCH 5/7] swiotlb: Use physical addresses for swiotlb_tbl_unmap_single Alexander Duyck
2012-10-04  0:39 ` [RFC PATCH 6/7] swiotlb: Use physical addresses instead of virtual in swiotlb_tbl_sync_single Alexander Duyck
2012-10-04  0:39 ` [RFC PATCH 7/7] swiotlb: Do not export swiotlb_bounce since there are no external consumers Alexander Duyck
2012-10-04 12:55 ` [RFC PATCH 0/7] Improve swiotlb performance by using physical addresses Konrad Rzeszutek Wilk
2012-10-04 15:50   ` Alexander Duyck
2012-10-04 13:33 ` Konrad Rzeszutek Wilk
2012-10-04 17:57   ` Alexander Duyck
2012-10-05 16:55 ` Andi Kleen
2012-10-05 19:35   ` Alexander Duyck
2012-10-05 20:02     ` Andi Kleen
2012-10-05 23:23       ` Alexander Duyck
2012-10-06 17:57         ` Andi Kleen
2012-10-06 18:56           ` H. Peter Anvin
2012-10-08 15:43           ` Alexander Duyck
2012-10-09 19:05             ` Alexander Duyck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121004003858.5016.67965.stgit@gitlad.jf.intel.com \
    --to=alexander.h.duyck@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=bhelgaas@google.com \
    --cc=devel@linuxdriverproject.org \
    --cc=hpa@zytor.com \
    --cc=joerg.roedel@amd.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=rob@landley.net \
    --cc=shuahkhan@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.