From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Mike Snitzer <snitzer@redhat.com>,
Mikulas Patocka <mpatocka@redhat.com>,
Alasdair G Kergon <agk@redhat.com>
Subject: [ 02/58] dm mpath: only retry ioctl when no paths if queue_if_no_path set
Date: Thu, 4 Oct 2012 14:19:09 -0700 [thread overview]
Message-ID: <20121004210635.744310869@linuxfoundation.org> (raw)
In-Reply-To: <20121004210635.449598766@linuxfoundation.org>
3.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <snitzer@redhat.com>
commit 7ba10aa6fbac7158a50bec142132b04bc480bb29 upstream.
When there are no paths and multipath receives an ioctl, it waits until
a path becomes available. This behaviour is incorrect if the
"queue_if_no_path" setting was not specified, as then the ioctl should
be rejected immediately, which this patch now does.
commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should
have checked if queue_if_no_path was configured before queueing IO.
Checking for the queue_if_no_path feature, like is done in map_io(),
allows the following table load to work without blocking in the
multipath_ioctl retry loop:
echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs
Without this fix the multipath_ioctl will block with the following stack
trace:
blkid D 0000000000000002 0 23936 1 0x00000000
ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440
ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440
ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040
Call Trace:
[<ffffffff814ce099>] schedule+0x29/0x70
[<ffffffff814cc312>] schedule_timeout+0x182/0x2e0
[<ffffffff8104dee0>] ? lock_timer_base+0x70/0x70
[<ffffffff814cc48e>] schedule_timeout_uninterruptible+0x1e/0x20
[<ffffffff8104f840>] msleep+0x20/0x30
[<ffffffffa0000839>] multipath_ioctl+0x109/0x170 [dm_multipath]
[<ffffffffa06bfb9c>] dm_blk_ioctl+0xbc/0xd0 [dm_mod]
[<ffffffff8122a408>] __blkdev_driver_ioctl+0x28/0x30
[<ffffffff8122a79e>] blkdev_ioctl+0xce/0x730
[<ffffffff811970ac>] block_ioctl+0x3c/0x40
[<ffffffff8117321c>] do_vfs_ioctl+0x8c/0x340
[<ffffffff81166293>] ? sys_newfstat+0x33/0x40
[<ffffffff81173571>] sys_ioctl+0xa1/0xb0
[<ffffffff814d70a9>] system_call_fastpath+0x16/0x1b
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-mpath.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1520,6 +1520,7 @@ static int multipath_ioctl(struct dm_tar
unsigned long arg)
{
struct multipath *m = ti->private;
+ struct pgpath *pgpath;
struct block_device *bdev;
fmode_t mode;
unsigned long flags;
@@ -1535,12 +1536,14 @@ again:
if (!m->current_pgpath)
__choose_pgpath(m, 0);
- if (m->current_pgpath) {
- bdev = m->current_pgpath->path.dev->bdev;
- mode = m->current_pgpath->path.dev->mode;
+ pgpath = m->current_pgpath;
+
+ if (pgpath) {
+ bdev = pgpath->path.dev->bdev;
+ mode = pgpath->path.dev->mode;
}
- if (m->queue_io)
+ if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path))
r = -EAGAIN;
else if (!bdev)
r = -EIO;
next prev parent reply other threads:[~2012-10-04 22:06 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 21:19 [ 00/58] 3.5.6-stable review Greg Kroah-Hartman
2012-10-04 21:19 ` [ 01/58] vfs: dcache: fix deadlock in tree traversal Greg Kroah-Hartman
2012-10-04 21:19 ` Greg Kroah-Hartman [this message]
2012-10-04 21:19 ` [ 03/58] dm: handle requests beyond end of device instead of using BUG_ON Greg Kroah-Hartman
2012-10-04 21:19 ` [ 04/58] dm table: clear add_random unless all devices have it set Greg Kroah-Hartman
2012-10-04 21:19 ` [ 05/58] dm verity: fix overflow check Greg Kroah-Hartman
2012-10-04 21:19 ` [ 06/58] usb: gadget: make g_printer enumerate again Greg Kroah-Hartman
2012-10-04 21:19 ` [ 07/58] usb: gadget: initialize the strings in tcm_usb_gadget properly Greg Kroah-Hartman
2012-10-04 21:19 ` [ 08/58] USB: option: blacklist QMI interface on ZTE MF683 Greg Kroah-Hartman
2012-10-04 21:19 ` [ 09/58] USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Greg Kroah-Hartman
2012-10-04 21:19 ` [ 10/58] USB: qcaux: add Pantech vendor class match Greg Kroah-Hartman
2012-10-04 21:19 ` [ 11/58] usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Greg Kroah-Hartman
2012-10-04 21:19 ` [ 12/58] USB: serial: fix up bug with missing {} Greg Kroah-Hartman
2012-10-04 21:19 ` [ 13/58] staging: speakup_soft: Fix reading of init string Greg Kroah-Hartman
2012-10-04 21:19 ` [ 14/58] tty: keyboard.c: Remove locking from vt_get_leds Greg Kroah-Hartman
2012-10-04 21:19 ` [ 15/58] staging: r8712u: Do not queue cloned skb Greg Kroah-Hartman
2012-10-04 21:19 ` [ 16/58] staging: comedi: s626: dont dereference insn->data Greg Kroah-Hartman
2012-10-04 21:19 ` [ 17/58] staging: comedi: jr3_pci: fix iomem dereference Greg Kroah-Hartman
2012-10-04 21:19 ` [ 18/58] staging: comedi: dont dereference user memory for INSN_INTTRIG Greg Kroah-Hartman
2012-10-04 21:19 ` [ 19/58] staging: comedi: fix memory leak for saved channel list Greg Kroah-Hartman
2012-10-04 21:19 ` [ 20/58] Remove BUG_ON from n_tty_read() Greg Kroah-Hartman
2012-10-04 21:19 ` [ 21/58] TTY: ttyprintk, dont touch behind tty->write_buf Greg Kroah-Hartman
2012-10-04 21:19 ` [ 22/58] serial: omap: fix software flow control Greg Kroah-Hartman
2012-10-04 21:19 ` [ 23/58] serial: pl011: handle corruption at high clock speeds Greg Kroah-Hartman
2012-10-04 21:19 ` [ 24/58] serial: set correct baud_base for EXSYS EX-41092 Dual 16950 Greg Kroah-Hartman
2012-10-04 21:19 ` [ 25/58] tools/hv: Fix file handle leak Greg Kroah-Hartman
2012-10-04 21:19 ` [ 26/58] tools/hv: Fix exit() error code Greg Kroah-Hartman
2012-10-04 21:19 ` [ 27/58] tools/hv: Check for read/write errors Greg Kroah-Hartman
2012-10-04 21:19 ` [ 28/58] b43legacy: Fix crash on unload when firmware not available Greg Kroah-Hartman
2012-10-04 21:19 ` [ 29/58] firmware: Add missing attributes to EFI variable attribute print out from sysfs Greg Kroah-Hartman
2012-10-04 21:19 ` [ 30/58] xhci: Intel Panther Point BEI quirk Greg Kroah-Hartman
2012-10-04 21:19 ` [ 31/58] xHCI: add cmd_ring_state Greg Kroah-Hartman
2012-10-04 21:19 ` [ 32/58] xHCI: add aborting command ring function Greg Kroah-Hartman
2012-10-04 21:19 ` [ 33/58] xHCI: cancel command after command timeout Greg Kroah-Hartman
2012-10-04 21:19 ` [ 34/58] xHCI: handle command after aborting the command ring Greg Kroah-Hartman
2012-10-04 21:19 ` [ 35/58] Increase XHCI suspend timeout to 16ms Greg Kroah-Hartman
2012-10-04 21:19 ` [ 36/58] HID: keep dev_rdesc unmodified and use it for comparisons Greg Kroah-Hartman
2012-10-04 21:19 ` [ 37/58] ath9k: Disable ASPM only for AR9285 Greg Kroah-Hartman
2012-10-04 21:19 ` [ 38/58] xen/pciback: Restore the PCI config space after an FLR Greg Kroah-Hartman
2012-10-04 21:19 ` [ 39/58] coredump: prevent double-free on an error path in core dumper Greg Kroah-Hartman
2012-10-04 21:19 ` [ 40/58] n_gsm.c: Implement 3GPP27.010 DLC start-up procedure in MUX Greg Kroah-Hartman
2012-10-04 21:19 ` [ 41/58] n_gsm: uplink SKBs accumulate on list Greg Kroah-Hartman
2012-10-04 21:19 ` [ 42/58] n_gsm: added interlocking for gsm_data_lock for certain code paths Greg Kroah-Hartman
2012-10-04 21:19 ` [ 43/58] n_gsm: memory leak in uplink error path Greg Kroah-Hartman
2012-10-04 21:19 ` [ 44/58] UBI: fix autoresize handling in R/O mode Greg Kroah-Hartman
2012-10-04 21:19 ` [ 45/58] UBI: erase free PEB with bitflip in EC header Greg Kroah-Hartman
2012-10-04 21:19 ` [ 46/58] Yama: handle 32-bit userspace prctl Greg Kroah-Hartman
2012-10-04 21:19 ` [ 47/58] SCSI: ibmvscsi: Fix host config length field overflow Greg Kroah-Hartman
2012-10-04 21:19 ` [ 48/58] SCSI: hpsa: Use LUN reset instead of target reset Greg Kroah-Hartman
2012-10-04 21:19 ` [ 49/58] can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock() Greg Kroah-Hartman
2012-10-04 21:19 ` [ 50/58] remoteproc: select VIRTIO to avoid build breakage Greg Kroah-Hartman
2012-10-04 21:19 ` [ 51/58] remoteproc: fix a potential NULL-dereference on cleanup Greg Kroah-Hartman
2012-10-04 21:19 ` [ 52/58] IPoIB: Fix use-after-free of multicast object Greg Kroah-Hartman
2012-10-04 21:20 ` [ 53/58] IB/srp: Fix use-after-free in srp_reset_req() Greg Kroah-Hartman
2012-10-04 21:20 ` [ 54/58] IB/srp: Avoid having aborted requests hang Greg Kroah-Hartman
2012-10-04 21:20 ` [ 55/58] isci: fix isci_pci_probe() generates warning on efi failure path Greg Kroah-Hartman
2012-10-04 21:20 ` [ 56/58] x86/alternatives: Fix p6 nops on non-modular kernels Greg Kroah-Hartman
2012-10-04 21:20 ` [Qemu-devel] " Greg Kroah-Hartman
2012-10-04 21:20 ` [ 57/58] SCSI: scsi_remove_target: fix softlockup regression on hot remove Greg Kroah-Hartman
2012-10-04 21:20 ` [ 58/58] SCSI: scsi_dh_alua: Enable STPG for unavailable ports Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121004210635.744310869@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=agk@redhat.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mpatocka@redhat.com \
--cc=snitzer@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.