All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Trippelsdorf <markus@trippelsdorf.de>
To: dri-devel@lists.freedesktop.org
Subject: Monitor sync out of range with current Linux git tree
Date: Fri, 5 Oct 2012 14:37:52 +0200	[thread overview]
Message-ID: <20121005123752.GA245@x4> (raw)

When I cold start my machine I see the following error message on my
monitor:

 Out of Range
 48.2kHz / 44Hz

I have to reboot on older kernel and kexec to the current one to get it
working again.

[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 4083554 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880215c60c00
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 0 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD3
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
[drm] fb mappable at 0xF0142000
[drm] vram apper at 0xF0000000
[drm] size 7299072
[drm] fb depth is 24
[drm]    pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 131x105
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0


X.Org X Server 1.13.0
Release Date: 2012-09-05
...
[     4.790] (II) [KMS] Kernel modesetting enabled.
[     4.790] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[     4.790] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.790] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[     4.790] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     4.790] (==) RADEON(0): Default visual is TrueColor
[     4.790] (==) RADEON(0): RGB weight 888
[     4.790] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[     4.790] (--) RADEON(0): Chipset: "ATI Radeon HD 3300 Graphics" (ChipID = 0x9614)
[     4.790] (II) RADEON(0): PCI card detected
[     4.791] (II) Loading sub module "exa"
[     4.791] (II) LoadModule: "exa"
[     4.792] (II) Loading /usr/lib64/xorg/modules/libexa.so
[     4.792] (II) Module exa: vendor="X.Org Foundation"
[     4.792] 	compiled for 1.13.0, module version = 2.6.0
[     4.792] 	ABI class: X.Org Video Driver, version 13.0
[     4.792] (II) RADEON(0): KMS Color Tiling: enabled
[     4.792] (II) RADEON(0): KMS Pageflipping: enabled
[     4.792] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[     4.813] (II) RADEON(0): Output VGA-0 has no monitor section
[     4.870] (II) RADEON(0): Output DVI-0 using monitor section DVI-0
[     4.870] (**) RADEON(0): Option "Rotate" "left"
[     4.890] (II) RADEON(0): EDID for output VGA-0
[     4.950] (II) RADEON(0): EDID for output DVI-0
[     4.950] (II) RADEON(0): Manufacturer: GSM  Model: 4e48  Serial#: 148502
[     4.950] (II) RADEON(0): Year: 2006  Week: 8
[     4.950] (II) RADEON(0): EDID Version: 1.3
[     4.950] (II) RADEON(0): Digital Display Input
[     4.950] (II) RADEON(0): Max Image Size [cm]: horiz.: 43  vert.: 27
[     4.950] (II) RADEON(0): Gamma: 2.20
[     4.950] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[     4.950] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     4.950] (II) RADEON(0): First detailed timing is preferred mode
[     4.950] (II) RADEON(0): redX: 0.651 redY: 0.333   greenX: 0.277 greenY: 0.614
[     4.950] (II) RADEON(0): blueX: 0.145 blueY: 0.082   whiteX: 0.313 whiteY: 0.329
[     4.950] (II) RADEON(0): Supported established timings:
[     4.950] (II) RADEON(0): 720x400@70Hz
[     4.950] (II) RADEON(0): 640x480@60Hz
[     4.950] (II) RADEON(0): 640x480@75Hz
[     4.950] (II) RADEON(0): 800x600@56Hz
[     4.950] (II) RADEON(0): 800x600@60Hz
[     4.950] (II) RADEON(0): 800x600@75Hz
[     4.950] (II) RADEON(0): 832x624@75Hz
[     4.950] (II) RADEON(0): 1024x768@60Hz
[     4.950] (II) RADEON(0): 1024x768@75Hz
[     4.950] (II) RADEON(0): 1280x1024@75Hz
[     4.950] (II) RADEON(0): 1152x864@75Hz
[     4.950] (II) RADEON(0): Manufacturer's mask: 0
[     4.950] (II) RADEON(0): Supported standard timings:
[     4.950] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.950] (II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[     4.950] (II) RADEON(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.950] (II) RADEON(0): Supported detailed timing:
[     4.950] (II) RADEON(0): clock: 146.2 MHz   Image Size:  434 x 270 mm
[     4.950] (II) RADEON(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[     4.950] (II) RADEON(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[     4.950] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz
[     4.950] (II) RADEON(0): Monitor name: L204WT
[     4.950] (II) RADEON(0): Monitor name: 
[     4.950] (II) RADEON(0): EDID (in hex):
[     4.950] (II) RADEON(0): 	00ffffffffffff001e6d484e16440200
[     4.950] (II) RADEON(0): 	08100103ea2b1b78ead105a655479d25
[     4.950] (II) RADEON(0): 	155054a76b80010181808140714f0101
[     4.950] (II) RADEON(0): 	01010101010121399030621a274068b0
[     4.950] (II) RADEON(0): 	3600b20e1100001c000000fd00384b1c
[     4.950] (II) RADEON(0): 	530f000a202020202020000000fc004c
[     4.950] (II) RADEON(0): 	32303457540a202020202020000000fc
[     4.950] (II) RADEON(0): 	000a2020202020202020202020200051
[     4.950] (II) RADEON(0): Printing probed modes for output DVI-0
[     4.950] (II) RADEON(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[     4.951] (II) RADEON(0): Modeline "1680x945"x60.0  131.48  1680 1784 1960 2240  945 946 949 978 -hsync +vsync (58.7 kHz)
[     4.951] (II) RADEON(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[     4.951] (II) RADEON(0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[     4.951] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.951] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     4.951] (II) RADEON(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     4.951] (II) RADEON(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[     4.951] (II) RADEON(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[     4.951] (II) RADEON(0): Modeline "1366x768"x60.0   85.89  1366 1439 1583 1800  768 769 772 795 -hsync +vsync (47.7 kHz)
[     4.951] (II) RADEON(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[     4.951] (II) RADEON(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[     4.951] (II) RADEON(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[     4.951] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.951] (II) RADEON(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz e)
[     4.951] (II) RADEON(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[     4.951] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[     4.951] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.951] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.951] (II) RADEON(0): Modeline "1024x576"x60.0   46.97  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[     4.951] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.951] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.951] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.951] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.951] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.951] (II) RADEON(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[     4.951] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.951] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.951] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.951] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.951] (II) RADEON(0): Output VGA-0 disconnected
[     4.951] (II) RADEON(0): Output DVI-0 connected
[     4.951] (II) RADEON(0): Using exact sizes for initial modes
[     4.951] (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
[     4.951] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     4.951] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:78ca000
[     4.951] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[     4.951] (==) RADEON(0): DPI set to (96, 96)
[     4.951] (II) Loading sub module "fb"
[     4.951] (II) LoadModule: "fb"
[     4.951] (II) Loading /usr/lib64/xorg/modules/libfb.so
[     4.953] (II) Module fb: vendor="X.Org Foundation"
[     4.953] 	compiled for 1.13.0, module version = 1.0.0
[     4.953] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.953] (II) Loading sub module "ramdac"
[     4.953] (II) LoadModule: "ramdac"
[     4.953] (II) Module "ramdac" already built-in
[     4.953] (--) Depth 24 pixmap format is 32 bpp
[     4.954] (II) RADEON(0): [DRI2] Setup complete
[     4.954] (II) RADEON(0): [DRI2]   DRI driver: r600
[     4.954] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[     4.954] (II) RADEON(0): Front buffer size: 6932K
[     4.954] (II) RADEON(0): VRAM usage limit set to 105080K
[     4.955] (==) RADEON(0): Backing store disabled
[     4.955] (II) RADEON(0): Direct rendering enabled
[     4.956] (II) RADEON(0): Setting EXA maxPitchBytes
[     4.956] (II) EXA(0): Driver allocated offscreen pixmaps
[     4.956] (II) EXA(0): Driver registered support for the following operations:
[     4.956] (II)         Solid
[     4.956] (II)         Copy
[     4.956] (II)         Composite (RENDER acceleration)
[     4.956] (II)         UploadToScreen
[     4.956] (II)         DownloadFromScreen
[     4.956] (II) RADEON(0): Acceleration enabled
[     4.956] (==) RADEON(0): DPMS enabled
[     4.956] (==) RADEON(0): Silken mouse enabled
[     4.957] (II) RADEON(0): Set up textured video
[     4.957] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[     4.958] (II) RADEON(0): [XvMC] Extension initialized.
[     4.958] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.958] (--) RandR disabled
[     5.046] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.046] (II) AIGLX: enabled GLX_INTEL_swap_event
[     5.046] (II) AIGLX: enabled GLX_ARB_create_context
[     5.046] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     5.046] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     5.046] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     5.046] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     5.047] (II) AIGLX: Loaded and initialized r600
[     5.047] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.053] (II) RADEON(0): Setting screen physical size to 277 x 444
[     5.146] (II) Using input driver 'mouse' for '<default pointer>'
[     5.146] (**) Option "CorePointer" "on"
[     5.146] (**) <default pointer>: always reports core events
[     5.146] (WW) <default pointer>: No Device specified, looking for one...
[     5.176] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[     5.176] (--) <default pointer>: Device: "/dev/input/mice"
[     5.176] (==) <default pointer>: Protocol: "Auto"
[     5.176] (**) <default pointer>: always reports core events
[     5.176] (**) Option "Device" "/dev/input/mice"
[     5.230] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[     5.230] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[     5.230] (**) <default pointer>: Buttons: 9
[     5.230] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[     5.230] (**) <default pointer>: (accel) keeping acceleration scheme 1
[     5.230] (**) <default pointer>: (accel) acceleration profile 0
[     5.230] (**) <default pointer>: (accel) acceleration factor: 2.000
[     5.230] (**) <default pointer>: (accel) acceleration threshold: 4
[     5.230] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[     5.523] (II) <default pointer>: ps2EnableDataReporting: succeeded
[     5.523] (II) Using input driver 'kbd' for '<default keyboard>'
[     5.523] (**) Option "CoreKeyboard" "on"
[     5.523] (**) <default keyboard>: always reports core events
[     5.523] (**) <default keyboard>: always reports core events
[     5.523] (**) Option "Protocol" "standard"
[     5.523] (**) Option "XkbRules" "base"
[     5.523] (**) Option "XkbModel" "pc105"
[     5.523] (**) Option "XkbLayout" "us"
[     5.523] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 7)

-- 
Markus

             reply	other threads:[~2012-10-05 12:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-05 12:37 Markus Trippelsdorf [this message]
2012-10-05 13:14 ` Monitor sync out of range with current Linux git tree Alex Deucher
2012-10-05 13:38   ` Markus Trippelsdorf
2012-10-05 14:02     ` Alex Deucher
2012-10-05 14:15       ` Markus Trippelsdorf
2012-10-05 14:25         ` Alex Deucher
2012-10-05 14:29           ` Markus Trippelsdorf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121005123752.GA245@x4 \
    --to=markus@trippelsdorf.de \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.