From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Sat, 06 Oct 2012 16:53:48 +0000 Subject: Re: [lm-sensors] Intel 5500 temperature Message-Id: <20121006185348.51ca4d59@endymion.delvare> List-Id: References: <20121006131253.59beb17a@endymion.delvare> In-Reply-To: <20121006131253.59beb17a@endymion.delvare> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Sat, 6 Oct 2012 09:43:39 -0700, Guenter Roeck wrote: > On Sat, Oct 06, 2012 at 01:12:53PM +0200, Jean Delvare wrote: > > I have the same chipset on my Asus Z8NA-D6 board and decided to look > > into this. There seems to be a thermal sensor in this chipset and > > following Intel's documentation I wrote a driver for it. You can > > download it at: > > http://khali.linux-fr.org/devel/misc/i5500_temp/ > > Generic installation instructions are available at: > > http://khali.linux-fr.org/devel/misc/INSTALL > >=20 > > Unfortunately it turns out the driver doesn't work for me. It returns a > > constant temperature of 36.5=B0C. I've tested on a few other systems at > > work, with the same disappointing result. I have read the datasheet > > again but can't find what I got wrong, if anything. > >=20 > > I'm still sharing my work, in case it works on other systems, or > > someone looking at my code can figure out what I missed. > > Nothing obvious afaics. Do you get reasonable values for the limits ? Yes, I get the default limit values mentioned in the datasheet: intel5500-pci-00a3 Adapter: PCI adapter temp1: +36.5=B0C (high =3D +100.0=B0C, hyst =3D +90.0=B0C) (crit =3D +110.0=B0C) --=20 Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors