Re: Linux 3.6.1

[Greg KH <gregkh@linuxfoundation.org>]

diff --git a/Makefile b/Makefile
index bb9fff2..9ed5898 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 6
-SUBLEVEL = 0
+SUBLEVEL = 1
 EXTRAVERSION =
 NAME = Terrified Chipmunk
 
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725..3a57644 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -42,10 +42,10 @@
 #define OMAP_UART_WER_MOD_WKUP	0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX		0x04
+#define OMAP_UART_SW_TX		0x8
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX		0x04
+#define OMAP_UART_SW_RX		0x2
 
 #define OMAP_UART_SYSC_RESET	0X07
 #define OMAP_UART_TCR_TRIG	0X0F
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 46b77ed..a7c6d6a 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -67,7 +67,7 @@ static int tpk_printk(const unsigned char *buf, int count)
 				tmp[tpk_curr + 1] = '\0';
 				printk(KERN_INFO "%s%s", tpk_tag, tmp);
 				tpk_curr = 0;
-				if (buf[i + 1] == '\n')
+				if ((i + 1) < count && buf[i + 1] == '\n')
 					i++;
 				break;
 			case '\n':
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index 47408e8..d10c987 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -435,12 +435,23 @@ efivar_attr_read(struct efivar_entry *entry, char *buf)
 	if (status != EFI_SUCCESS)
 		return -EIO;
 
-	if (var->Attributes & 0x1)
+	if (var->Attributes & EFI_VARIABLE_NON_VOLATILE)
 		str += sprintf(str, "EFI_VARIABLE_NON_VOLATILE\n");
-	if (var->Attributes & 0x2)
+	if (var->Attributes & EFI_VARIABLE_BOOTSERVICE_ACCESS)
 		str += sprintf(str, "EFI_VARIABLE_BOOTSERVICE_ACCESS\n");
-	if (var->Attributes & 0x4)
+	if (var->Attributes & EFI_VARIABLE_RUNTIME_ACCESS)
 		str += sprintf(str, "EFI_VARIABLE_RUNTIME_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD)
+		str += sprintf(str, "EFI_VARIABLE_HARDWARE_ERROR_RECORD\n");
+	if (var->Attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS)
+		str += sprintf(str,
+			"EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS\n");
+	if (var->Attributes &
+			EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)
+		str += sprintf(str,
+			"EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_APPEND_WRITE)
+		str += sprintf(str, "EFI_VARIABLE_APPEND_WRITE\n");
 	return str - buf;
 }
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8bcd168..5de3bb3 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -757,6 +757,7 @@ int hid_open_report(struct hid_device *device)
 	struct hid_item item;
 	unsigned int size;
 	__u8 *start;
+	__u8 *buf;
 	__u8 *end;
 	int ret;
 	static int (*dispatch_type[])(struct hid_parser *parser,
@@ -775,12 +776,21 @@ int hid_open_report(struct hid_device *device)
 		return -ENODEV;
 	size = device->dev_rsize;
 
+	buf = kmemdup(start, size, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
 	if (device->driver->report_fixup)
-		start = device->driver->report_fixup(device, start, &size);
+		start = device->driver->report_fixup(device, buf, &size);
+	else
+		start = buf;
 
-	device->rdesc = kmemdup(start, size, GFP_KERNEL);
-	if (device->rdesc == NULL)
+	start = kmemdup(start, size, GFP_KERNEL);
+	kfree(buf);
+	if (start == NULL)
 		return -ENOMEM;
+
+	device->rdesc = start;
 	device->rsize = size;
 
 	parser = vzalloc(sizeof(struct hid_parser));
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index dedd8e4..8e0c4bf94 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1415,20 +1415,20 @@ static int hid_post_reset(struct usb_interface *intf)
 	 * configuration descriptors passed, we already know that
 	 * the size of the HID report descriptor has not changed.
 	 */
-	rdesc = kmalloc(hid->rsize, GFP_KERNEL);
+	rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
 	if (!rdesc) {
 		dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
 		return 1;
 	}
 	status = hid_get_class_descriptor(dev,
 				interface->desc.bInterfaceNumber,
-				HID_DT_REPORT, rdesc, hid->rsize);
+				HID_DT_REPORT, rdesc, hid->dev_rsize);
 	if (status < 0) {
 		dbg_hid("reading report descriptor failed (post_reset)\n");
 		kfree(rdesc);
 		return 1;
 	}
-	status = memcmp(rdesc, hid->rdesc, hid->rsize);
+	status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize);
 	kfree(rdesc);
 	if (status != 0) {
 		dbg_hid("report descriptor changed\n");
diff --git a/drivers/infiniband/hw/qib/qib_keys.c b/drivers/infiniband/hw/qib/qib_keys.c
index e9486c7..81c7b73 100644
--- a/drivers/infiniband/hw/qib/qib_keys.c
+++ b/drivers/infiniband/hw/qib/qib_keys.c
@@ -186,8 +186,9 @@ int qib_lkey_ok(struct qib_lkey_table *rkt, struct qib_pd *pd,
 		goto bail;
 
 	off = sge->addr - mr->user_base;
-	if (unlikely(sge->addr < mr->iova || off + sge->length > mr->length ||
-		     (mr->access_flags & acc) == 0))
+	if (unlikely(sge->addr < mr->user_base ||
+		     off + sge->length > mr->length ||
+		     (mr->access_flags & acc) != acc))
 		goto bail;
 	if (unlikely(!atomic_inc_not_zero(&mr->refcount)))
 		goto bail;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 1e19b5a..ea0dfc7 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -150,7 +150,7 @@ static int ipoib_stop(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	ipoib_ib_dev_down(dev, 0);
+	ipoib_ib_dev_down(dev, 1);
 	ipoib_ib_dev_stop(dev, 0);
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 7536724..cecb98a 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -175,7 +175,9 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
 
 	mcast->mcmember = *mcmember;
 
-	/* Set the cached Q_Key before we attach if it's the broadcast group */
+	/* Set the multicast MTU and cached Q_Key before we attach if it's
+	 * the broadcast group.
+	 */
 	if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
 		    sizeof (union ib_gid))) {
 		spin_lock_irq(&priv->lock);
@@ -183,10 +185,17 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
 			spin_unlock_irq(&priv->lock);
 			return -EAGAIN;
 		}
+		priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu));
 		priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
 		spin_unlock_irq(&priv->lock);
 		priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
 		set_qkey = 1;
+
+		if (!ipoib_cm_admin_enabled(dev)) {
+			rtnl_lock();
+			dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu));
+			rtnl_unlock();
+		}
 	}
 
 	if (!test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) {
@@ -574,14 +583,6 @@ void ipoib_mcast_join_task(struct work_struct *work)
 		return;
 	}
 
-	priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu));
-
-	if (!ipoib_cm_admin_enabled(dev)) {
-		rtnl_lock();
-		dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu));
-		rtnl_unlock();
-	}
-
 	ipoib_dbg_mcast(priv, "successfully joined all multicast groups\n");
 
 	clear_bit(IPOIB_MCAST_RUN, &priv->flags);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 1b5b0c7..922d845 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -638,9 +638,9 @@ static void srp_reset_req(struct srp_target_port *target, struct srp_request *re
 	struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL);
 
 	if (scmnd) {
+		srp_free_req(target, req, scmnd, 0);
 		scmnd->result = DID_RESET << 16;
 		scmnd->scsi_done(scmnd);
-		srp_free_req(target, req, scmnd, 0);
 	}
 }
 
@@ -1687,6 +1687,7 @@ static int srp_abort(struct scsi_cmnd *scmnd)
 			  SRP_TSK_ABORT_TASK);
 	srp_free_req(target, req, scmnd, 0);
 	scmnd->result = DID_ABORT << 16;
+	scmnd->scsi_done(scmnd);
 
 	return SUCCESS;
 }
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 14eaece..0786919 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -53,14 +53,19 @@
 #define ABS_POS_BITS 13
 
 /*
- * Any position values from the hardware above the following limits are
- * treated as "wrapped around negative" values that have been truncated to
- * the 13-bit reporting range of the hardware. These are just reasonable
- * guesses and can be adjusted if hardware is found that operates outside
- * of these parameters.
+ * These values should represent the absolute maximum value that will
+ * be reported for a positive position value. Some Synaptics firmware
+ * uses this value to indicate a finger near the edge of the touchpad
+ * whose precise position cannot be determined.
+ *
+ * At least one touchpad is known to report positions in excess of this
+ * value which are actually negative values truncated to the 13-bit
+ * reporting range. These values have never been observed to be lower
+ * than 8184 (i.e. -8), so we treat all values greater than 8176 as
+ * negative and any other value as positive.
  */
-#define X_MAX_POSITIVE (((1 << ABS_POS_BITS) + XMAX) / 2)
-#define Y_MAX_POSITIVE (((1 << ABS_POS_BITS) + YMAX) / 2)
+#define X_MAX_POSITIVE 8176
+#define Y_MAX_POSITIVE 8176
 
 /*****************************************************************************
  *	Stuff we need even when we do not want native Synaptics support
@@ -604,11 +609,21 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 	}
 
-	/* Convert wrap-around values to negative */
+	/*
+	 * Convert wrap-around values to negative. (X|Y)_MAX_POSITIVE
+	 * is used by some firmware to indicate a finger at the edge of
+	 * the touchpad whose precise position cannot be determined, so
+	 * convert these values to the maximum axis value.
+	 */
 	if (hw->x > X_MAX_POSITIVE)
 		hw->x -= 1 << ABS_POS_BITS;
+	else if (hw->x == X_MAX_POSITIVE)
+		hw->x = XMAX;
+
 	if (hw->y > Y_MAX_POSITIVE)
 		hw->y -= 1 << ABS_POS_BITS;
+	else if (hw->y == Y_MAX_POSITIVE)
+		hw->y = YMAX;
 
 	return 0;
 }
diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
index bd27cbb..68d4d1f 100644
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -975,7 +975,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
 			return err;
 		goto adjust_mean_ec;
 	case UBI_IO_FF:
-		if (ec_err)
+		if (ec_err || bitflips)
 			err = add_to_list(ai, pnum, UBI_UNKNOWN,
 					  UBI_UNKNOWN, ec, 1, &ai->erase);
 		else
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 2c5ed5c..da052ed 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -759,6 +759,11 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 	struct ubi_volume *vol = ubi->volumes[vol_id];
 	int err, old_reserved_pebs = vol->reserved_pebs;
 
+	if (ubi->ro_mode) {
+		ubi_warn("skip auto-resize because of R/O mode");
+		return 0;
+	}
+
 	/*
 	 * Clear the auto-resize flag in the volume in-memory copy of the
 	 * volume table, and 'ubi_resize_volume()' will propagate this change
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 06adf88..524ef96 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -181,7 +181,7 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
 
 		if (!clock_name || !strcmp(clock_name, "sys")) {
 			sys_clk = clk_get(&ofdev->dev, "sys_clk");
-			if (!sys_clk) {
+			if (IS_ERR(sys_clk)) {
 				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
 				goto exit_unmap;
 			}
@@ -204,7 +204,7 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
 
 		if (clocksrc < 0) {
 			ref_clk = clk_get(&ofdev->dev, "ref_clk");
-			if (!ref_clk) {
+			if (IS_ERR(ref_clk)) {
 				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
 				goto exit_unmap;
 			}
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index a978984..0c43e7f 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -127,8 +127,9 @@ static void ath_pci_aspm_init(struct ath_common *common)
 	if (!parent)
 		return;
 
-	if (ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
-		/* Bluetooth coexistance requires disabling ASPM. */
+	if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
+	    (AR_SREV_9285(ah))) {
+		/* Bluetooth coexistance requires disabling ASPM for AR9285. */
 		pci_read_config_byte(pdev, pos + PCI_EXP_LNKCTL, &aspm);
 		aspm &= ~(PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
 		pci_write_config_byte(pdev, pos + PCI_EXP_LNKCTL, aspm);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 8156135..0ef08e0 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3894,6 +3894,8 @@ static void b43legacy_remove(struct ssb_device *dev)
 	cancel_work_sync(&wl->firmware_load);
 
 	B43legacy_WARN_ON(!wl);
+	if (!wldev->fw.ucode)
+		return;			/* NULL if fw never loaded */
 	if (wl->current_dev == wldev)
 		ieee80211_unregister_hw(wl->hw);
 
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index f8d818a..811ff72 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -5,6 +5,7 @@ config REMOTEPROC
 	tristate
 	depends on EXPERIMENTAL
 	select FW_CONFIG
+	select VIRTIO
 
 config OMAP_REMOTEPROC
 	tristate "OMAP remoteproc support"
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index d5c2dbf..70b296f 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -545,17 +545,10 @@ static int rproc_handle_carveout(struct rproc *rproc,
 	dev_dbg(dev, "carveout rsc: da %x, pa %x, len %x, flags %x\n",
 			rsc->da, rsc->pa, rsc->len, rsc->flags);
 
-	mapping = kzalloc(sizeof(*mapping), GFP_KERNEL);
-	if (!mapping) {
-		dev_err(dev, "kzalloc mapping failed\n");
-		return -ENOMEM;
-	}
-
 	carveout = kzalloc(sizeof(*carveout), GFP_KERNEL);
 	if (!carveout) {
 		dev_err(dev, "kzalloc carveout failed\n");
-		ret = -ENOMEM;
-		goto free_mapping;
+		return -ENOMEM;
 	}
 
 	va = dma_alloc_coherent(dev->parent, rsc->len, &dma, GFP_KERNEL);
@@ -585,11 +578,18 @@ static int rproc_handle_carveout(struct rproc *rproc,
 	 * physical address in this case.
 	 */
 	if (rproc->domain) {
+		mapping = kzalloc(sizeof(*mapping), GFP_KERNEL);
+		if (!mapping) {
+			dev_err(dev, "kzalloc mapping failed\n");
+			ret = -ENOMEM;
+			goto dma_free;
+		}
+
 		ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len,
 								rsc->flags);
 		if (ret) {
 			dev_err(dev, "iommu_map failed: %d\n", ret);
-			goto dma_free;
+			goto free_mapping;
 		}
 
 		/*
@@ -634,12 +634,12 @@ static int rproc_handle_carveout(struct rproc *rproc,
 
 	return 0;
 
+free_mapping:
+	kfree(mapping);
 dma_free:
 	dma_free_coherent(dev->parent, rsc->len, va, dma);
 free_carv:
 	kfree(carveout);
-free_mapping:
-	kfree(mapping);
 	return ret;
 }
 
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 08d80a6..6f4d8e6 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -641,8 +641,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 		h->state = TPGS_STATE_STANDBY;
 		break;
 	case TPGS_STATE_OFFLINE:
-	case TPGS_STATE_UNAVAILABLE:
-		/* Path unusable for unavailable/offline */
+		/* Path unusable */
 		err = SCSI_DH_DEV_OFFLINED;
 		break;
 	default:
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 2b4261c..f9823f2 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3266,7 +3266,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.Timeout = 0; /* Don't time out */
 			memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
 			c->Request.CDB[0] =  cmd;
-			c->Request.CDB[1] = 0x03;  /* Reset target above */
+			c->Request.CDB[1] = HPSA_RESET_TYPE_LUN;
 			/* If bytes 4-7 are zero, it means reset the */
 			/* LunID device */
 			c->Request.CDB[4] = 0x00;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 3a6c474..337e8b3 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1541,6 +1541,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 
 	host_config = &evt_struct->iu.mad.host_config;
 
+	/* The transport length field is only 16-bit */
+	length = min(0xffff, length);
+
 	/* Set up a lun reset SRP command */
 	memset(host_config, 0x00, sizeof(*host_config));
 	host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 92c1d86..1286a8a 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -644,7 +644,6 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic
 						orom->hdr.version)) {
 			dev_warn(&pdev->dev,
 				 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
-			devm_kfree(&pdev->dev, orom);
 			orom = NULL;
 			break;
 		}
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
index 4d95654..8ac646e 100644
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -104,7 +104,6 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev)
 
 	if (i >= len) {
 		dev_err(&pdev->dev, "oprom parse error\n");
-		devm_kfree(&pdev->dev, rom);
 		rom = NULL;
 	}
 	pci_unmap_biosrom(oprom);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 093d4f6..ce5224c 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1031,33 +1031,31 @@ static void __scsi_remove_target(struct scsi_target *starget)
 void scsi_remove_target(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
-	struct scsi_target *starget, *found;
+	struct scsi_target *starget, *last = NULL;
 	unsigned long flags;
 
- restart:
-	found = NULL;
+	/* remove targets being careful to lookup next entry before
+	 * deleting the last
+	 */
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(starget, &shost->__targets, siblings) {
 		if (starget->state == STARGET_DEL)
 			continue;
 		if (starget->dev.parent == dev || &starget->dev == dev) {
-			found = starget;
-			found->reap_ref++;
-			break;
+			/* assuming new targets arrive at the end */
+			starget->reap_ref++;
+			spin_unlock_irqrestore(shost->host_lock, flags);
+			if (last)
+				scsi_target_reap(last);
+			last = starget;
+			__scsi_remove_target(starget);
+			spin_lock_irqsave(shost->host_lock, flags);
 		}
 	}
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
-	if (found) {
-		__scsi_remove_target(found);
-		scsi_target_reap(found);
-		/* in the case where @dev has multiple starget children,
-		 * continue removing.
-		 *
-		 * FIXME: does such a case exist?
-		 */
-		goto restart;
-	}
+	if (last)
+		scsi_target_reap(last);
 }
 EXPORT_SYMBOL(scsi_remove_target);
 
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index e821264..41dea18 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -951,7 +951,7 @@ static int parse_insn(struct comedi_device *dev, struct comedi_insn *insn,
 				ret = -EAGAIN;
 				break;
 			}
-			ret = s->async->inttrig(dev, s, insn->data[0]);
+			ret = s->async->inttrig(dev, s, data[0]);
 			if (ret >= 0)
 				ret = 1;
 			break;
@@ -1196,7 +1196,6 @@ static int do_cmd_ioctl(struct comedi_device *dev,
 		goto cleanup;
 	}
 
-	kfree(async->cmd.chanlist);
 	async->cmd = user_cmd;
 	async->cmd.data = NULL;
 	/* load channel/gain list */
@@ -2033,6 +2032,8 @@ void do_become_nonbusy(struct comedi_device *dev, struct comedi_subdevice *s)
 	if (async) {
 		comedi_reset_async_buf(async);
 		async->inttrig = NULL;
+		kfree(async->cmd.chanlist);
+		async->cmd.chanlist = NULL;
 	} else {
 		printk(KERN_ERR
 		       "BUG: (?) do_become_nonbusy called with async=0\n");
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index 93f94cd..9c133a0 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -884,7 +884,7 @@ static int jr3_pci_attach(struct comedi_device *dev,
 	}
 
 	/*  Reset DSP card */
-	devpriv->iobase->channel[0].reset = 0;
+	writel(0, &devpriv->iobase->channel[0].reset);
 
 	result = comedi_load_firmware(dev, "jr3pci.idm", jr3_download_firmware);
 	dev_dbg(dev->class_dev, "Firmare load %d\n", result);
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index f90578e..2b03b68 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -1868,7 +1868,7 @@ static int s626_enc_insn_config(struct comedi_device *dev,
 	/*   (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
 
 	k->SetMode(dev, k, Setup, TRUE);
-	Preload(dev, k, *(insn->data));
+	Preload(dev, k, data[0]);
 	k->PulseIndex(dev, k);
 	SetLatchSource(dev, k, valueSrclatch);
 	k->SetEnable(dev, k, (uint16_t) (enab != 0));
diff --git a/drivers/staging/rtl8712/rtl8712_recv.c b/drivers/staging/rtl8712/rtl8712_recv.c
index 8e82ce2..88e3ca6 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.c
+++ b/drivers/staging/rtl8712/rtl8712_recv.c
@@ -1127,6 +1127,9 @@ static void recv_tasklet(void *priv)
 		recvbuf2recvframe(padapter, pskb);
 		skb_reset_tail_pointer(pskb);
 		pskb->len = 0;
-		skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+		if (!skb_cloned(pskb))
+			skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+		else
+			consume_skb(pskb);
 	}
 }
diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c
index 42cdafe..b5130c8 100644
--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -40,7 +40,7 @@ static int softsynth_is_alive(struct spk_synth *synth);
 static unsigned char get_index(void);
 
 static struct miscdevice synth_device;
-static int initialized;
+static int init_pos;
 static int misc_registered;
 
 static struct var_t vars[] = {
@@ -194,7 +194,7 @@ static int softsynth_close(struct inode *inode, struct file *fp)
 	unsigned long flags;
 	spk_lock(flags);
 	synth_soft.alive = 0;
-	initialized = 0;
+	init_pos = 0;
 	spk_unlock(flags);
 	/* Make sure we let applications go before leaving */
 	speakup_start_ttys();
@@ -239,13 +239,8 @@ static ssize_t softsynth_read(struct file *fp, char *buf, size_t count,
 			ch = '\x18';
 		} else if (synth_buffer_empty()) {
 			break;
-		} else if (!initialized) {
-			if (*init) {
-				ch = *init;
-				init++;
-			} else {
-				initialized = 1;
-			}
+		} else if (init[init_pos]) {
+			ch = init[init_pos++];
 		} else {
 			ch = synth_buffer_getc();
 		}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c43b683..90dff82 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -875,7 +875,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 
 	/* dlci->skb is locked by tx_lock */
 	if (dlci->skb == NULL) {
-		dlci->skb = skb_dequeue(&dlci->skb_list);
+		dlci->skb = skb_dequeue_tail(&dlci->skb_list);
 		if (dlci->skb == NULL)
 			return 0;
 		first = 1;
@@ -899,8 +899,11 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 
 	/* FIXME: need a timer or something to kick this so it can't
 	   get stuck with no work outstanding and no buffer free */
-	if (msg == NULL)
+	if (msg == NULL) {
+		skb_queue_tail(&dlci->skb_list, dlci->skb);
+		dlci->skb = NULL;
 		return -ENOMEM;
+	}
 	dp = msg->data;
 
 	if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
@@ -971,16 +974,19 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
 static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
 {
 	unsigned long flags;
+	int sweep;
 
 	spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
 	/* If we have nothing running then we need to fire up */
+	sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
 	if (dlci->gsm->tx_bytes == 0) {
 		if (dlci->net)
 			gsm_dlci_data_output_framed(dlci->gsm, dlci);
 		else
 			gsm_dlci_data_output(dlci->gsm, dlci);
-	} else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
-		gsm_dlci_data_sweep(dlci->gsm);
+	}
+	if (sweep)
+ 		gsm_dlci_data_sweep(dlci->gsm);
 	spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
 }
 
@@ -1190,6 +1196,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 							u8 *data, int clen)
 {
 	u8 buf[1];
+	unsigned long flags;
+
 	switch (command) {
 	case CMD_CLD: {
 		struct gsm_dlci *dlci = gsm->dlci[0];
@@ -1215,7 +1223,9 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 		gsm->constipated = 0;
 		gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
 		/* Kick the link in case it is idling */
+		spin_lock_irqsave(&gsm->tx_lock, flags);
 		gsm_data_kick(gsm);
+		spin_unlock_irqrestore(&gsm->tx_lock, flags);
 		break;
 	case CMD_MSC:
 		/* Out of band modem line change indicator for a DLCI */
@@ -2377,12 +2387,12 @@ static void gsmld_write_wakeup(struct tty_struct *tty)
 
 	/* Queue poll */
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	gsm_data_kick(gsm);
 	if (gsm->tx_bytes < TX_THRESH_LO) {
-		spin_lock_irqsave(&gsm->tx_lock, flags);
 		gsm_dlci_data_sweep(gsm);
-		spin_unlock_irqrestore(&gsm->tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
@@ -2889,6 +2899,10 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	gsm = gsm_mux[mux];
 	if (gsm->dead)
 		return -EL2HLT;
+	/* If DLCI 0 is not yet fully open return an error. This is ok from a locking
+	   perspective as we don't have to worry about this if DLCI0 is lost */
+	if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+		return -EL2NSYNC;
 	dlci = gsm->dlci[line];
 	if (dlci == NULL)
 		dlci = gsm_dlci_alloc(gsm, line);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ee1c268..26f0d0e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1728,7 +1728,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 
 do_it_again:
 
-	BUG_ON(!tty->read_buf);
+	if (WARN_ON(!tty->read_buf))
+		return -EAGAIN;
 
 	c = job_control(tty, file);
 	if (c < 0)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 28e7c7c..6b8fcb4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1164,6 +1164,8 @@ pci_xr17c154_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_00	0x2500
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_30	0x2530
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
@@ -3232,8 +3234,11 @@ static struct pci_device_id serial_pci_tbl[] = {
 		 * For now just used the hex ID 0x950a.
 		 */
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
-		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
-		pbn_b0_2_115200 },
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
+		0, 0, pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
+		0, 0, pbn_b0_2_115200 },
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_2_1130000 },
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d3553b5..762f5fd 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1603,13 +1603,26 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 			old_cr &= ~ST_UART011_CR_OVSFACT;
 	}
 
+	/*
+	 * Workaround for the ST Micro oversampling variants to
+	 * increase the bitrate slightly, by lowering the divisor,
+	 * to avoid delayed sampling of start bit at high speeds,
+	 * else we see data corruption.
+	 */
+	if (uap->vendor->oversampling) {
+		if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+			quot -= 1;
+		else if ((baud > 3250000) && (quot > 2))
+			quot -= 2;
+	}
 	/* Set baud rate */
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
 
 	/*
 	 * ----------v----------v----------v----------v-----
-	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+	 * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
+	 * UART011_FBRD & UART011_IBRD.
 	 * ----------^----------^----------^----------^-----
 	 */
 	writew(lcr_h, port->membase + uap->lcrh_rx);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d3cda0c..22992cd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -667,19 +667,19 @@ serial_omap_configure_xonxoff
 
 	/*
 	 * IXON Flag:
-	 * Enable XON/XOFF flow control on output.
-	 * Transmit XON1, XOFF1
+	 * Flow control for OMAP.TX
+	 * OMAP.RX should listen for XON/XOFF
 	 */
 	if (termios->c_iflag & IXON)
-		up->efr |= OMAP_UART_SW_TX;
+		up->efr |= OMAP_UART_SW_RX;
 
 	/*
 	 * IXOFF Flag:
-	 * Enable XON/XOFF flow control on input.
-	 * Receiver compares XON1, XOFF1.
+	 * Flow control for OMAP.RX
+	 * OMAP.TX should send XON/XOFF
 	 */
 	if (termios->c_iflag & IXOFF)
-		up->efr |= OMAP_UART_SW_RX;
+		up->efr |= OMAP_UART_SW_TX;
 
 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 48cc6f2..770a854 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1049,13 +1049,10 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data)
  */
 int vt_get_leds(int console, int flag)
 {
-	unsigned long flags;
 	struct kbd_struct * kbd = kbd_table + console;
 	int ret;
 
-	spin_lock_irqsave(&kbd_event_lock, flags);
 	ret = vc_kbd_led(kbd, flag);
-	spin_unlock_irqrestore(&kbd_event_lock, flags);
 
 	return ret;
 }
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index f1f9290..7587615 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -141,18 +141,14 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-#define STRING_MANUFACTURER		1
-#define STRING_PRODUCT			2
-#define STRING_SERIALNUM		3
+#define STRING_MANUFACTURER		0
+#define STRING_PRODUCT			1
+#define STRING_SERIALNUM		2
 
 /* holds our biggest descriptor */
 #define USB_DESC_BUFSIZE		256
 #define USB_BUFSIZE			8192
 
-/* This device advertises one configuration. */
-#define DEV_CONFIG_VALUE		1
-#define	PRINTER_INTERFACE		0
-
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -162,16 +158,12 @@ static struct usb_device_descriptor device_desc = {
 	.bDeviceProtocol =	0,
 	.idVendor =		cpu_to_le16(PRINTER_VENDOR_NUM),
 	.idProduct =		cpu_to_le16(PRINTER_PRODUCT_NUM),
-	.iManufacturer =	STRING_MANUFACTURER,
-	.iProduct =		STRING_PRODUCT,
-	.iSerialNumber =	STRING_SERIALNUM,
 	.bNumConfigurations =	1
 };
 
 static struct usb_interface_descriptor intf_desc = {
 	.bLength =		sizeof intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	PRINTER_INTERFACE,
 	.bNumEndpoints =	2,
 	.bInterfaceClass =	USB_CLASS_PRINTER,
 	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
@@ -260,9 +252,9 @@ static char				pnp_string [1024] =
 
 /* static strings, in UTF-8 */
 static struct usb_string		strings [] = {
-	{ STRING_MANUFACTURER,	manufacturer, },
-	{ STRING_PRODUCT,	product_desc, },
-	{ STRING_SERIALNUM,	serial_num, },
+	[STRING_MANUFACTURER].s = manufacturer,
+	[STRING_PRODUCT].s = product_desc,
+	[STRING_SERIALNUM].s =	serial_num,
 	{  }		/* end of list */
 };
 
@@ -871,25 +863,13 @@ static int set_interface(struct printer_dev *dev, unsigned number)
 	int			result = 0;
 
 	/* Free the current interface */
-	switch (dev->interface) {
-	case PRINTER_INTERFACE:
-		printer_reset_interface(dev);
-		break;
-	}
+	printer_reset_interface(dev);
 
-	switch (number) {
-	case PRINTER_INTERFACE:
-		result = set_printer_interface(dev);
-		if (result) {
-			printer_reset_interface(dev);
-		} else {
-			dev->interface = PRINTER_INTERFACE;
-		}
-		break;
-	default:
-		result = -EINVAL;
-		/* FALL THROUGH */
-	}
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
 
 	if (!result)
 		INFO(dev, "Using interface %x\n", number);
@@ -972,7 +952,7 @@ static int printer_func_setup(struct usb_function *f,
 		switch (ctrl->bRequest) {
 		case 0: /* Get the IEEE-1284 PNP String */
 			/* Only one printer interface is supported. */
-			if ((wIndex>>8) != PRINTER_INTERFACE)
+			if ((wIndex>>8) != dev->interface)
 				break;
 
 			value = (pnp_string[0]<<8)|pnp_string[1];
@@ -983,7 +963,7 @@ static int printer_func_setup(struct usb_function *f,
 
 		case 1: /* Get Port Status */
 			/* Only one printer interface is supported. */
-			if (wIndex != PRINTER_INTERFACE)
+			if (wIndex != dev->interface)
 				break;
 
 			*(u8 *)req->buf = dev->printer_status;
@@ -992,7 +972,7 @@ static int printer_func_setup(struct usb_function *f,
 
 		case 2: /* Soft Reset */
 			/* Only one printer interface is supported. */
-			if (wIndex != PRINTER_INTERFACE)
+			if (wIndex != dev->interface)
 				break;
 
 			printer_soft_reset(dev);
@@ -1020,6 +1000,37 @@ unknown:
 static int __init printer_func_bind(struct usb_configuration *c,
 		struct usb_function *f)
 {
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep		*in_ep, *out_ep;
+	int id;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+	in_ep->driver_data = in_ep;	/* claim */
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+	out_ep->driver_data = out_ep;	/* claim */
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
 	return 0;
 }
 
@@ -1035,7 +1046,8 @@ static int printer_func_set_alt(struct usb_function *f,
 	int ret = -ENOTSUPP;
 
 	if (!alt)
-		ret = set_interface(dev, PRINTER_INTERFACE);
+		ret = set_interface(dev, intf);
+
 	return ret;
 }
 
@@ -1107,13 +1119,14 @@ static int __init printer_bind_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
-	struct usb_ep		*in_ep, *out_ep;
 	int			status = -ENOMEM;
 	int			gcnum;
 	size_t			len;
 	u32			i;
 	struct usb_request	*req;
 
+	usb_ep_autoconfig_reset(gadget);
+
 	dev = &usb_printer_gadget;
 
 	dev->function.name = shortname;
@@ -1125,6 +1138,10 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	dev->function.set_alt = printer_func_set_alt;
 	dev->function.disable = printer_func_disable;
 
+	status = usb_add_function(c, &dev->function);
+	if (status)
+		return status;
+
 	/* Setup the sysfs files for the printer gadget. */
 	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
 				  NULL, "g_printer");
@@ -1169,26 +1186,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	pnp_string[0] = (len >> 8) & 0xFF;
 	pnp_string[1] = len & 0xFF;
 
-	/* all we really need is bulk IN/OUT */
-	usb_ep_autoconfig_reset(gadget);
-	in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		dev_err(&gadget->dev, "can't autoconfigure on %s\n",
-			gadget->name);
-		return -ENODEV;
-	}
-	in_ep->driver_data = in_ep;	/* claim */
-
-	out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
-	if (!out_ep)
-		goto autoconf_fail;
-	out_ep->driver_data = out_ep;	/* claim */
-
-	/* assumes that all endpoints are dual-speed */
-	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
 	usb_gadget_set_selfpowered(gadget);
 
 	if (gadget->is_otg) {
@@ -1215,9 +1212,6 @@ autoconf_fail:
 	dev->current_rx_bytes = 0;
 	dev->current_rx_buf = NULL;
 
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-
 	for (i = 0; i < QLEN; i++) {
 		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
 		if (!req) {
@@ -1250,8 +1244,6 @@ autoconf_fail:
 	dev->gadget = gadget;
 
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
-			in_ep->name);
 	return 0;
 
 fail:
@@ -1266,7 +1258,17 @@ static int printer_unbind(struct usb_composite_dev *cdev)
 
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
-	return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	int ret;
+
+	ret = usb_string_ids_tab(cdev, strings);
+	if (ret < 0)
+		return ret;
+	device_desc.iManufacturer = strings[STRING_MANUFACTURER].id;
+	device_desc.iProduct = strings[STRING_PRODUCT].id;
+	device_desc.iSerialNumber = strings[STRING_SERIALNUM].id;
+
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	return ret;
 }
 
 static struct usb_composite_driver printer_driver = {
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 5444866..d37334c 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1977,7 +1977,6 @@ static struct usb_interface_descriptor bot_intf_desc = {
 	.bInterfaceClass =      USB_CLASS_MASS_STORAGE,
 	.bInterfaceSubClass =   USB_SC_SCSI,
 	.bInterfaceProtocol =   USB_PR_BULK,
-	.iInterface =           USB_G_STR_INT_UAS,
 };
 
 static struct usb_interface_descriptor uasp_intf_desc = {
@@ -1988,7 +1987,6 @@ static struct usb_interface_descriptor uasp_intf_desc = {
 	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
 	.bInterfaceSubClass =	USB_SC_SCSI,
 	.bInterfaceProtocol =	USB_PR_UAS,
-	.iInterface =		USB_G_STR_INT_BBB,
 };
 
 static struct usb_endpoint_descriptor uasp_bi_desc = {
@@ -2209,20 +2207,16 @@ static struct usb_device_descriptor usbg_device_desc = {
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.idVendor =		cpu_to_le16(UAS_VENDOR_ID),
 	.idProduct =		cpu_to_le16(UAS_PRODUCT_ID),
-	.iManufacturer =	USB_G_STR_MANUFACTOR,
-	.iProduct =		USB_G_STR_PRODUCT,
-	.iSerialNumber =	USB_G_STR_SERIAL,
-
 	.bNumConfigurations =   1,
 };
 
 static struct usb_string	usbg_us_strings[] = {
-	{ USB_G_STR_MANUFACTOR,	"Target Manufactor"},
-	{ USB_G_STR_PRODUCT,	"Target Product"},
-	{ USB_G_STR_SERIAL,	"000000000001"},
-	{ USB_G_STR_CONFIG,	"default config"},
-	{ USB_G_STR_INT_UAS,	"USB Attached SCSI"},
-	{ USB_G_STR_INT_BBB,	"Bulk Only Transport"},
+	[USB_G_STR_MANUFACTOR].s	= "Target Manufactor",
+	[USB_G_STR_PRODUCT].s		= "Target Product",
+	[USB_G_STR_SERIAL].s		= "000000000001",
+	[USB_G_STR_CONFIG].s		= "default config",
+	[USB_G_STR_INT_UAS].s		= "USB Attached SCSI",
+	[USB_G_STR_INT_BBB].s		= "Bulk Only Transport",
 	{ },
 };
 
@@ -2244,7 +2238,6 @@ static int guas_unbind(struct usb_composite_dev *cdev)
 static struct usb_configuration usbg_config_driver = {
 	.label                  = "Linux Target",
 	.bConfigurationValue    = 1,
-	.iConfiguration		= USB_G_STR_CONFIG,
 	.bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
 };
 
@@ -2417,6 +2410,9 @@ static int usbg_cfg_bind(struct usb_configuration *c)
 	fu->function.disable = usbg_disable;
 	fu->tpg = the_only_tpg_I_currently_have;
 
+	bot_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_BBB].id;
+	uasp_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_UAS].id;
+
 	ret = usb_add_function(c, &fu->function);
 	if (ret)
 		goto err;
@@ -2431,6 +2427,17 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
 
+	ret = usb_string_ids_tab(cdev, usbg_us_strings);
+	if (ret)
+		return ret;
+
+	usbg_device_desc.iManufacturer =
+		usbg_us_strings[USB_G_STR_MANUFACTOR].id;
+	usbg_device_desc.iProduct = usbg_us_strings[USB_G_STR_PRODUCT].id;
+	usbg_device_desc.iSerialNumber = usbg_us_strings[USB_G_STR_SERIAL].id;
+	usbg_config_driver.iConfiguration =
+		usbg_us_strings[USB_G_STR_CONFIG].id;
+
 	ret = usb_add_config(cdev, &usbg_config_driver,
 			usbg_cfg_bind);
 	return 0;
diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h
index bb18999..9d32ec3 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.h
+++ b/drivers/usb/gadget/tcm_usb_gadget.h
@@ -16,12 +16,14 @@
 #define UASP_SS_EP_COMP_LOG_STREAMS 4
 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
 
-#define USB_G_STR_MANUFACTOR    1
-#define USB_G_STR_PRODUCT       2
-#define USB_G_STR_SERIAL        3
-#define USB_G_STR_CONFIG        4
-#define USB_G_STR_INT_UAS       5
-#define USB_G_STR_INT_BBB       6
+enum {
+	USB_G_STR_MANUFACTOR,
+	USB_G_STR_PRODUCT,
+	USB_G_STR_SERIAL,
+	USB_G_STR_CONFIG,
+	USB_G_STR_INT_UAS,
+	USB_G_STR_INT_BBB,
+};
 
 #define USB_G_ALT_INT_BBB       0
 #define USB_G_ALT_INT_UAS       1
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index eb896a2..20dbdcb 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -118,7 +118,8 @@ static void ehci_poll_ASS(struct ehci_hcd *ehci)
 			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
 			return;
 		}
-		ehci_warn(ehci, "Waited too long for the async schedule status, giving up\n");
+		ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n",
+				want, actual);
 	}
 	ehci->ASS_poll_count = 0;
 
@@ -163,7 +164,8 @@ static void ehci_poll_PSS(struct ehci_hcd *ehci)
 			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
 			return;
 		}
-		ehci_warn(ehci, "Waited too long for the periodic schedule status, giving up\n");
+		ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
+				want, actual);
 	}
 	ehci->PSS_poll_count = 0;
 
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 77689bd..487bc08 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1772,6 +1772,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
+	struct xhci_cd  *cur_cd, *next_cd;
 	unsigned long	flags;
 	int size;
 	int i, j, num_ports;
@@ -1795,6 +1796,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
 	xhci_dbg(xhci, "Freed command ring\n");
+	list_for_each_entry_safe(cur_cd, next_cd,
+			&xhci->cancel_cmd_list, cancel_cmd_list) {
+		list_del(&cur_cd->cancel_cmd_list);
+		kfree(cur_cd);
+	}
 
 	for (i = 1; i < MAX_HC_SLOTS; ++i)
 		xhci_free_virt_device(xhci, i);
@@ -2340,6 +2346,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
+	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
 	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 9bfd4ca11..8345d7c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -103,6 +103,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 * PPT chipsets.
 		 */
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+		xhci->quirks |= XHCI_AVOID_BEI;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 643c2f3..a6e18b9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -280,12 +280,123 @@ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 /* Ring the host controller doorbell after placing a command on the ring */
 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 {
+	if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
+		return;
+
 	xhci_dbg(xhci, "// Ding dong!\n");
 	xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
 	/* Flush PCI posted writes */
 	xhci_readl(xhci, &xhci->dba->doorbell[0]);
 }
 
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+{
+	u64 temp_64;
+	int ret;
+
+	xhci_dbg(xhci, "Abort command ring\n");
+
+	if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) {
+		xhci_dbg(xhci, "The command ring isn't running, "
+				"Have the command ring been stopped?\n");
+		return 0;
+	}
+
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	if (!(temp_64 & CMD_RING_RUNNING)) {
+		xhci_dbg(xhci, "Command ring had been stopped\n");
+		return 0;
+	}
+	xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+	xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+			&xhci->op_regs->cmd_ring);
+
+	/* Section 4.6.1.2 of xHCI 1.0 spec says software should
+	 * time the completion od all xHCI commands, including
+	 * the Command Abort operation. If software doesn't see
+	 * CRR negated in a timely manner (e.g. longer than 5
+	 * seconds), then it should assume that the there are
+	 * larger problems with the xHC and assert HCRST.
+	 */
+	ret = handshake(xhci, &xhci->op_regs->cmd_ring,
+			CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
+	if (ret < 0) {
+		xhci_err(xhci, "Stopped the command ring failed, "
+				"maybe the host is dead\n");
+		xhci->xhc_state |= XHCI_STATE_DYING;
+		xhci_quiesce(xhci);
+		xhci_halt(xhci);
+		return -ESHUTDOWN;
+	}
+
+	return 0;
+}
+
+static int xhci_queue_cd(struct xhci_hcd *xhci,
+		struct xhci_command *command,
+		union xhci_trb *cmd_trb)
+{
+	struct xhci_cd *cd;
+	cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC);
+	if (!cd)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&cd->cancel_cmd_list);
+
+	cd->command = command;
+	cd->cmd_trb = cmd_trb;
+	list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list);
+
+	return 0;
+}
+
+/*
+ * Cancel the command which has issue.
+ *
+ * Some commands may hang due to waiting for acknowledgement from
+ * usb device. It is outside of the xHC's ability to control and
+ * will cause the command ring is blocked. When it occurs software
+ * should intervene to recover the command ring.
+ * See Section 4.6.1.1 and 4.6.1.2
+ */
+int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
+		union xhci_trb *cmd_trb)
+{
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_warn(xhci, "Abort the command ring,"
+				" but the xHCI is dead.\n");
+		retval = -ESHUTDOWN;
+		goto fail;
+	}
+
+	/* queue the cmd desriptor to cancel_cmd_list */
+	retval = xhci_queue_cd(xhci, command, cmd_trb);
+	if (retval) {
+		xhci_warn(xhci, "Queuing command descriptor failed.\n");
+		goto fail;
+	}
+
+	/* abort command ring */
+	retval = xhci_abort_cmd_ring(xhci);
+	if (retval) {
+		xhci_err(xhci, "Abort command ring failed\n");
+		if (unlikely(retval == -ESHUTDOWN)) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
+			xhci_dbg(xhci, "xHCI host controller is dead.\n");
+			return retval;
+		}
+	}
+
+fail:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return retval;
+}
+
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
 		unsigned int slot_id,
 		unsigned int ep_index,
@@ -1059,6 +1170,20 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 	}
 }
 
+/* Complete the command and detele it from the devcie's command queue.
+ */
+static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
+		struct xhci_command *command, u32 status)
+{
+	command->status = status;
+	list_del(&command->cmd_list);
+	if (command->completion)
+		complete(command->completion);
+	else
+		xhci_free_command(xhci, command);
+}
+
+
 /* Check to see if a command in the device's command queue matches this one.
  * Signal the completion or free the command, and return 1.  Return 0 if the
  * completed command isn't at the head of the command list.
@@ -1077,15 +1202,144 @@ static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
 	if (xhci->cmd_ring->dequeue != command->command_trb)
 		return 0;
 
-	command->status = GET_COMP_CODE(le32_to_cpu(event->status));
-	list_del(&command->cmd_list);
-	if (command->completion)
-		complete(command->completion);
-	else
-		xhci_free_command(xhci, command);
+	xhci_complete_cmd_in_cmd_wait_list(xhci, command,
+			GET_COMP_CODE(le32_to_cpu(event->status)));
 	return 1;
 }
 
+/*
+ * Finding the command trb need to be cancelled and modifying it to
+ * NO OP command. And if the command is in device's command wait
+ * list, finishing and freeing it.
+ *
+ * If we can't find the command trb, we think it had already been
+ * executed.
+ */
+static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd)
+{
+	struct xhci_segment *cur_seg;
+	union xhci_trb *cmd_trb;
+	u32 cycle_state;
+
+	if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue)
+		return;
+
+	/* find the current segment of command ring */
+	cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
+			xhci->cmd_ring->dequeue, &cycle_state);
+
+	/* find the command trb matched by cd from command ring */
+	for (cmd_trb = xhci->cmd_ring->dequeue;
+			cmd_trb != xhci->cmd_ring->enqueue;
+			next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) {
+		/* If the trb is link trb, continue */
+		if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3]))
+			continue;
+
+		if (cur_cd->cmd_trb == cmd_trb) {
+
+			/* If the command in device's command list, we should
+			 * finish it and free the command structure.
+			 */
+			if (cur_cd->command)
+				xhci_complete_cmd_in_cmd_wait_list(xhci,
+					cur_cd->command, COMP_CMD_STOP);
+
+			/* get cycle state from the origin command trb */
+			cycle_state = le32_to_cpu(cmd_trb->generic.field[3])
+				& TRB_CYCLE;
+
+			/* modify the command trb to NO OP command */
+			cmd_trb->generic.field[0] = 0;
+			cmd_trb->generic.field[1] = 0;
+			cmd_trb->generic.field[2] = 0;
+			cmd_trb->generic.field[3] = cpu_to_le32(
+					TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+			break;
+		}
+	}
+}
+
+static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci)
+{
+	struct xhci_cd *cur_cd, *next_cd;
+
+	if (list_empty(&xhci->cancel_cmd_list))
+		return;
+
+	list_for_each_entry_safe(cur_cd, next_cd,
+			&xhci->cancel_cmd_list, cancel_cmd_list) {
+		xhci_cmd_to_noop(xhci, cur_cd);
+		list_del(&cur_cd->cancel_cmd_list);
+		kfree(cur_cd);
+	}
+}
+
+/*
+ * traversing the cancel_cmd_list. If the command descriptor according
+ * to cmd_trb is found, the function free it and return 1, otherwise
+ * return 0.
+ */
+static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci,
+		union xhci_trb *cmd_trb)
+{
+	struct xhci_cd *cur_cd, *next_cd;
+
+	if (list_empty(&xhci->cancel_cmd_list))
+		return 0;
+
+	list_for_each_entry_safe(cur_cd, next_cd,
+			&xhci->cancel_cmd_list, cancel_cmd_list) {
+		if (cur_cd->cmd_trb == cmd_trb) {
+			if (cur_cd->command)
+				xhci_complete_cmd_in_cmd_wait_list(xhci,
+					cur_cd->command, COMP_CMD_STOP);
+			list_del(&cur_cd->cancel_cmd_list);
+			kfree(cur_cd);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the
+ * trb pointed by the command ring dequeue pointer is the trb we want to
+ * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will
+ * traverse the cancel_cmd_list to trun the all of the commands according
+ * to command descriptor to NO-OP trb.
+ */
+static int handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+		int cmd_trb_comp_code)
+{
+	int cur_trb_is_good = 0;
+
+	/* Searching the cmd trb pointed by the command ring dequeue
+	 * pointer in command descriptor list. If it is found, free it.
+	 */
+	cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci,
+			xhci->cmd_ring->dequeue);
+
+	if (cmd_trb_comp_code == COMP_CMD_ABORT)
+		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	else if (cmd_trb_comp_code == COMP_CMD_STOP) {
+		/* traversing the cancel_cmd_list and canceling
+		 * the command according to command descriptor
+		 */
+		xhci_cancel_cmd_in_cd_list(xhci);
+
+		xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+		/*
+		 * ring command ring doorbell again to restart the
+		 * command ring
+		 */
+		if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue)
+			xhci_ring_cmd_db(xhci);
+	}
+	return cur_trb_is_good;
+}
+
 static void handle_cmd_completion(struct xhci_hcd *xhci,
 		struct xhci_event_cmd *event)
 {
@@ -1111,6 +1365,22 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 		xhci->error_bitmask |= 1 << 5;
 		return;
 	}
+
+	if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) ||
+		(GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) {
+		/* If the return value is 0, we think the trb pointed by
+		 * command ring dequeue pointer is a good trb. The good
+		 * trb means we don't want to cancel the trb, but it have
+		 * been stopped by host. So we should handle it normally.
+		 * Otherwise, driver should invoke inc_deq() and return.
+		 */
+		if (handle_stopped_cmd_ring(xhci,
+				GET_COMP_CODE(le32_to_cpu(event->status)))) {
+			inc_deq(xhci, xhci->cmd_ring);
+			return;
+		}
+	}
+
 	switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
 		& TRB_TYPE_BITMASK) {
 	case TRB_TYPE(TRB_ENABLE_SLOT):
@@ -3400,7 +3670,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			} else {
 				td->last_trb = ep_ring->enqueue;
 				field |= TRB_IOC;
-				if (xhci->hci_version == 0x100) {
+				if (xhci->hci_version == 0x100 &&
+						!(xhci->quirks &
+							XHCI_AVOID_BEI)) {
 					/* Set BEI bit except for the last td */
 					if (i < num_tds - 1)
 						field |= TRB_BEI;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6ece0ed..a49868d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
  * handshake done).  There are two failure modes:  "usec" have passed (major
  * hardware flakeout), or the register reads as all-ones (hardware removed).
  */
-static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
 		      u32 mask, u32 done, int usec)
 {
 	u32	result;
@@ -105,9 +105,10 @@ int xhci_halt(struct xhci_hcd *xhci)
 
 	ret = handshake(xhci, &xhci->op_regs->status,
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
-	if (!ret)
+	if (!ret) {
 		xhci->xhc_state |= XHCI_STATE_HALTED;
-	else
+		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	} else
 		xhci_warn(xhci, "Host not halted after %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	return ret;
@@ -470,6 +471,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void)
 
 	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
 	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	if (!dmi_product_name || !dmi_sys_vendor)
+		return false;
 
 	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
 		return false;
@@ -581,6 +584,7 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
 		return -ENODEV;
 	}
 	xhci->shared_hcd->state = HC_STATE_RUNNING;
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
 
 	if (xhci->quirks & XHCI_NEC_HOST)
 		xhci_ring_cmd_db(xhci);
@@ -886,7 +890,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command &= ~CMD_RUN;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
 	if (handshake(xhci, &xhci->op_regs->status,
-		      STS_HALT, STS_HALT, 100*100)) {
+		      STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
 		xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
@@ -2521,6 +2525,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	struct completion *cmd_completion;
 	u32 *cmd_status;
 	struct xhci_virt_device *virt_dev;
+	union xhci_trb *cmd_trb;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	virt_dev = xhci->devs[udev->slot_id];
@@ -2566,6 +2571,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	}
 	init_completion(cmd_completion);
 
+	cmd_trb = xhci->cmd_ring->dequeue;
 	if (!ctx_change)
 		ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
 				udev->slot_id, must_succeed);
@@ -2587,14 +2593,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	/* Wait for the configure endpoint command to complete */
 	timeleft = wait_for_completion_interruptible_timeout(
 			cmd_completion,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for %s command\n",
 				timeleft == 0 ? "Timeout" : "Signal",
 				ctx_change == 0 ?
 					"configure endpoint" :
 					"evaluate context");
-		/* FIXME cancel the configure endpoint command */
+		/* cancel the configure endpoint command */
+		ret = xhci_cancel_cmd(xhci, command, cmd_trb);
+		if (ret < 0)
+			return ret;
 		return -ETIME;
 	}
 
@@ -3543,8 +3552,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	unsigned long flags;
 	int timeleft;
 	int ret;
+	union xhci_trb *cmd_trb;
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	cmd_trb = xhci->cmd_ring->dequeue;
 	ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3556,12 +3567,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 
 	/* XXX: how much time for xHC slot assignment? */
 	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for a slot\n",
 				timeleft == 0 ? "Timeout" : "Signal");
-		/* FIXME cancel the enable slot request */
-		return 0;
+		/* cancel the enable slot request */
+		return xhci_cancel_cmd(xhci, NULL, cmd_trb);
 	}
 
 	if (!xhci->slot_id) {
@@ -3622,6 +3633,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
 	u64 temp_64;
+	union xhci_trb *cmd_trb;
 
 	if (!udev->slot_id) {
 		xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -3660,6 +3672,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	cmd_trb = xhci->cmd_ring->dequeue;
 	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
 					udev->slot_id);
 	if (ret) {
@@ -3672,7 +3685,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 
 	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
 	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
 	 * the SetAddress() "recovery interval" required by USB and aborting the
 	 * command on a timeout.
@@ -3680,7 +3693,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for address device command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
-		/* FIXME cancel the address device command */
+		/* cancel the address device command */
+		ret = xhci_cancel_cmd(xhci, NULL, cmd_trb);
+		if (ret < 0)
+			return ret;
 		return -ETIME;
 	}
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 1a05908..53df4e7 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1256,6 +1256,16 @@ struct xhci_td {
 	union xhci_trb		*last_trb;
 };
 
+/* xHCI command default timeout value */
+#define XHCI_CMD_DEFAULT_TIMEOUT	(5 * HZ)
+
+/* command descriptor */
+struct xhci_cd {
+	struct list_head	cancel_cmd_list;
+	struct xhci_command	*command;
+	union xhci_trb		*cmd_trb;
+};
+
 struct xhci_dequeue_state {
 	struct xhci_segment *new_deq_seg;
 	union xhci_trb *new_deq_ptr;
@@ -1421,6 +1431,11 @@ struct xhci_hcd {
 	/* data structures */
 	struct xhci_device_context_array *dcbaa;
 	struct xhci_ring	*cmd_ring;
+	unsigned int            cmd_ring_state;
+#define CMD_RING_STATE_RUNNING         (1 << 0)
+#define CMD_RING_STATE_ABORTED         (1 << 1)
+#define CMD_RING_STATE_STOPPED         (1 << 2)
+	struct list_head        cancel_cmd_list;
 	unsigned int		cmd_ring_reserved_trbs;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
@@ -1496,6 +1511,7 @@ struct xhci_hcd {
 #define XHCI_INTEL_HOST		(1 << 12)
 #define XHCI_SPURIOUS_REBOOT	(1 << 13)
 #define XHCI_COMP_MODE_QUIRK	(1 << 14)
+#define XHCI_AVOID_BEI		(1 << 15)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1704,6 +1720,8 @@ static inline void xhci_unregister_plat(void)
 
 /* xHCI host controller glue */
 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
+int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+		u32 mask, u32 done, int usec);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
 int xhci_reset(struct xhci_hcd *xhci);
@@ -1794,6 +1812,8 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_dequeue_state *deq_state);
 void xhci_stop_endpoint_command_watchdog(unsigned long arg);
+int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
+		union xhci_trb *cmd_trb);
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 		unsigned int ep_index, unsigned int stream_id);
 
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
index c1a67cb..88db976 100644
--- a/drivers/usb/otg/mxs-phy.c
+++ b/drivers/usb/otg/mxs-phy.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/workqueue.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -34,9 +35,16 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+/*
+ * Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit
+ * so that connection and reset processing can be completed for the root hub.
+ */
+#define MXY_PHY_ENHOSTDISCONDETECT_DELAY	250
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	struct delayed_work enhostdiscondetect_work;
 };
 
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
@@ -62,6 +70,7 @@ static int mxs_phy_init(struct usb_phy *phy)
 
 	clk_prepare_enable(mxs_phy->clk);
 	mxs_phy_hw_init(mxs_phy);
+	INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL);
 
 	return 0;
 }
@@ -76,13 +85,34 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 	clk_disable_unprepare(mxs_phy->clk);
 }
 
+static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws)
+{
+	struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy,
+						enhostdiscondetect_work.work);
+
+	/* Enable HOSTDISCONDETECT after delay. */
+	dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n");
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+				mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET);
+}
+
 static int mxs_phy_on_connect(struct usb_phy *phy, int port)
 {
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
 	dev_dbg(phy->dev, "Connect on port %d\n", port);
 
-	mxs_phy_hw_init(to_mxs_phy(phy));
-	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
-			phy->io_priv + HW_USBPHY_CTRL_SET);
+	mxs_phy_hw_init(mxs_phy);
+
+	/*
+	 * Delay enabling ENHOSTDISCONDETECT so that connection and
+	 * reset processing can be completed for the root hub.
+	 */
+	dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n");
+	PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work,
+			mxs_phy_enhostdiscondetect_delay);
+	schedule_delayed_work(&mxs_phy->enhostdiscondetect_work,
+			msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY));
 
 	return 0;
 }
@@ -91,6 +121,8 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
 {
 	dev_dbg(phy->dev, "Disconnect on port %d\n", port);
 
+	/* No need to delay before clearing ENHOSTDISCONDETECT. */
+	dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n");
 	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
 			phy->io_priv + HW_USBPHY_CTRL_CLR);
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f906b3a..b71ee32 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -584,6 +584,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	/*
 	 * ELV devices:
 	 */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 41fe582..57c12ef 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -517,6 +517,11 @@
  */
 #define FTDI_TAVIR_STK500_PID	0xFA33	/* STK500 AVR programmer */
 
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID	0x8a98	/* TIAO/DIYGADGET USB Multi-Protocol Adapter */
 
 
 /********************************/
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ce88d1..5f30800 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -870,7 +870,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index a4edc7e..9b1b96f 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,8 +36,6 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
-#define PANTECH_PRODUCT_UML190_VZW		0x3716
-#define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
 #define CMOTECH_VENDOR_ID			0x16d8
@@ -68,11 +66,9 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) },  /* NMEA */
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) },  /* WMC */
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },  /* DIAG */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) },  /* NMEA */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) },  /* WMC */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) },  /* DIAG */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 27483f9..667c39c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1426,9 +1426,10 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[]
 
 	/* we only set the reset_resume field if the serial_driver has one */
 	for (sd = serial_drivers; *sd; ++sd) {
-		if ((*sd)->reset_resume)
+		if ((*sd)->reset_resume) {
 			udriver->reset_resume = usb_serial_reset_resume;
 			break;
+		}
 	}
 
 	rc = usb_register(udriver);
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 0334272..77c9f76 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -362,6 +362,7 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
 	else {
 		dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
 		__pci_reset_function_locked(dev);
+		pci_restore_state(dev);
 	}
 	/* Now disable the device (this also ensures some private device
 	 * data is setup before we export)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 1b52956..0225fdd 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1696,30 +1696,19 @@ static int elf_note_info_init(struct elf_note_info *info)
 		return 0;
 	info->psinfo = kmalloc(sizeof(*info->psinfo), GFP_KERNEL);
 	if (!info->psinfo)
-		goto notes_free;
+		return 0;
 	info->prstatus = kmalloc(sizeof(*info->prstatus), GFP_KERNEL);
 	if (!info->prstatus)
-		goto psinfo_free;
+		return 0;
 	info->fpu = kmalloc(sizeof(*info->fpu), GFP_KERNEL);
 	if (!info->fpu)
-		goto prstatus_free;
+		return 0;
 #ifdef ELF_CORE_COPY_XFPREGS
 	info->xfpu = kmalloc(sizeof(*info->xfpu), GFP_KERNEL);
 	if (!info->xfpu)
-		goto fpu_free;
+		return 0;
 #endif
 	return 1;
-#ifdef ELF_CORE_COPY_XFPREGS
- fpu_free:
-	kfree(info->fpu);
-#endif
- prstatus_free:
-	kfree(info->prstatus);
- psinfo_free:
-	kfree(info->psinfo);
- notes_free:
-	kfree(info->notes);
-	return 0;
 }
 
 static int fill_note_info(struct elfhdr *elf, int phdrs,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6b4565c..8d3c427 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1847,7 +1847,6 @@
 #define PCI_DEVICE_ID_SIIG_8S_20x_650	0x2081
 #define PCI_DEVICE_ID_SIIG_8S_20x_850	0x2082
 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL	0x2050
-#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL	0x2530
 
 #define PCI_VENDOR_ID_RADISYS		0x1331
 
diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c
index 0cc99a3..dcd6178 100644
--- a/security/yama/yama_lsm.c
+++ b/security/yama/yama_lsm.c
@@ -143,7 +143,7 @@ static int yama_task_prctl(int option, unsigned long arg2, unsigned long arg3,
 		if (arg2 == 0) {
 			yama_ptracer_del(NULL, myself);
 			rc = 0;
-		} else if (arg2 == PR_SET_PTRACER_ANY) {
+		} else if (arg2 == PR_SET_PTRACER_ANY || (int)arg2 == -1) {
 			rc = yama_ptracer_add(NULL, myself);
 		} else {
 			struct task_struct *tracer;
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index d9834b3..2984ffb 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -106,7 +106,7 @@ static void kvp_acquire_lock(int pool)
 
 	if (fcntl(kvp_file_info[pool].fd, F_SETLKW, &fl) == -1) {
 		syslog(LOG_ERR, "Failed to acquire the lock pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 }
 
@@ -118,7 +118,7 @@ static void kvp_release_lock(int pool)
 	if (fcntl(kvp_file_info[pool].fd, F_SETLK, &fl) == -1) {
 		perror("fcntl");
 		syslog(LOG_ERR, "Failed to release the lock pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 }
 
@@ -137,14 +137,19 @@ static void kvp_update_file(int pool)
 	if (!filep) {
 		kvp_release_lock(pool);
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	bytes_written = fwrite(kvp_file_info[pool].records,
 				sizeof(struct kvp_record),
 				kvp_file_info[pool].num_records, filep);
 
-	fflush(filep);
+	if (ferror(filep) || fclose(filep)) {
+		kvp_release_lock(pool);
+		syslog(LOG_ERR, "Failed to write file, pool: %d", pool);
+		exit(EXIT_FAILURE);
+	}
+
 	kvp_release_lock(pool);
 }
 
@@ -163,14 +168,19 @@ static void kvp_update_mem_state(int pool)
 	if (!filep) {
 		kvp_release_lock(pool);
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
-	while (!feof(filep)) {
+	for (;;) {
 		readp = &record[records_read];
 		records_read += fread(readp, sizeof(struct kvp_record),
 					ENTRIES_PER_BLOCK * num_blocks,
 					filep);
 
+		if (ferror(filep)) {
+			syslog(LOG_ERR, "Failed to read file, pool: %d", pool);
+			exit(EXIT_FAILURE);
+		}
+
 		if (!feof(filep)) {
 			/*
 			 * We have more data to read.
@@ -180,7 +190,7 @@ static void kvp_update_mem_state(int pool)
 
 			if (record == NULL) {
 				syslog(LOG_ERR, "malloc failed");
-				exit(-1);
+				exit(EXIT_FAILURE);
 			}
 			continue;
 		}
@@ -191,6 +201,7 @@ static void kvp_update_mem_state(int pool)
 	kvp_file_info[pool].records = record;
 	kvp_file_info[pool].num_records = records_read;
 
+	fclose(filep);
 	kvp_release_lock(pool);
 }
 static int kvp_file_init(void)
@@ -208,7 +219,7 @@ static int kvp_file_init(void)
 	if (access("/var/opt/hyperv", F_OK)) {
 		if (mkdir("/var/opt/hyperv", S_IRUSR | S_IWUSR | S_IROTH)) {
 			syslog(LOG_ERR, " Failed to create /var/opt/hyperv");
-			exit(-1);
+			exit(EXIT_FAILURE);
 		}
 	}
 
@@ -232,12 +243,18 @@ static int kvp_file_init(void)
 			fclose(filep);
 			return 1;
 		}
-		while (!feof(filep)) {
+		for (;;) {
 			readp = &record[records_read];
 			records_read += fread(readp, sizeof(struct kvp_record),
 					ENTRIES_PER_BLOCK,
 					filep);
 
+			if (ferror(filep)) {
+				syslog(LOG_ERR, "Failed to read file, pool: %d",
+				       i);
+				exit(EXIT_FAILURE);
+			}
+
 			if (!feof(filep)) {
 				/*
 				 * We have more data to read.
@@ -657,13 +674,13 @@ int main(void)
 
 	if (kvp_file_init()) {
 		syslog(LOG_ERR, "Failed to initialize the pools");
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	fd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
 	if (fd < 0) {
 		syslog(LOG_ERR, "netlink socket creation failed; error:%d", fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	addr.nl_family = AF_NETLINK;
 	addr.nl_pad = 0;
@@ -675,7 +692,7 @@ int main(void)
 	if (error < 0) {
 		syslog(LOG_ERR, "bind failed; error:%d", error);
 		close(fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	sock_opt = addr.nl_groups;
 	setsockopt(fd, 270, 1, &sock_opt, sizeof(sock_opt));
@@ -695,7 +712,7 @@ int main(void)
 	if (len < 0) {
 		syslog(LOG_ERR, "netlink_send failed; error:%d", len);
 		close(fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	pfd.fd = fd;
@@ -863,7 +880,7 @@ kvp_done:
 		len = netlink_send(fd, incoming_cn_msg);
 		if (len < 0) {
 			syslog(LOG_ERR, "net_link send failed; error:%d", len);
-			exit(-1);
+			exit(EXIT_FAILURE);
 		}
 	}