From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] : Please pull u-boot-imx/next
Date: Tue, 9 Oct 2012 18:53:35 +0200 [thread overview]
Message-ID: <20121009185335.1f23cbee@lilith> (raw)
In-Reply-To: <5072A347.1090004@denx.de>
Hi Stefano,
On Mon, 08 Oct 2012 11:56:23 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> these changes are in my -next branch, so please pull them into arm/next.
>
> The following changes since commit 4668a086bb0a769b741e3a4ffab85f1c41c7cdb8:
>
> sandbox: Add asm/errno.h (2012-09-29 10:00:29 -0700)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git next
>
> for you to fetch changes up to 635e9c5c1cd51f6f2cf9f62f01cb6aa436b119a6:
>
> configs: mx6qsabre_common.h: Use default clock definitions (2012-10-03
> 17:19:39 +0200)
>
> ----------------------------------------------------------------
> Beno?t Th?baudeau (28):
> mx51evk: Add CONFIG_REVISION_TAG
> KARO TX25: Fix NAND Flash R/W cycle times
> mx5/6: Define default SoC input clock frequencies
> mx5 clocks: Cleanup
> mx5: Use explicit clock gate names
> mx5: Fix clock gate values
> mx51: Fix USB PHY clocks
> mx5 clocks: Add and use CCSR definitions
> mx5 clocks: Fix get_lp_apm()
> mx5 clocks: Fix get_periph_clk()
> mx5 clocks: Fix get_ipg_per_clk()
> mx5 clocks: Fix get_uart_clk()
> mx5 clocks: Simplify imx_get_cspiclk()
> mx5 clocks: Fix MXC_FEC_CLK
> mx51: Fix I2C clock ID check
> mx5/6 clocks: Fix SDHC clocks
> mx25: Fix decode_pll
> mx25: Clean up clock calculations
> mx25: Define more standard clocks
> mx25 clocks: Fix MXC_FEC_CLK
> mx25: Clean up clocks API
> mx25: Define cpu_eth_init() only if needed
> mx25: Fix eSDHC support
> mx5: Optimize lowlevel_init code size
> mx31: Add more CCM access macros
> mx35: Define MAX and AIPS registers
> mx31: Fix PDR0_CSI_PODF
> mx25: Clean up lowlevel_init
>
> Eric Benard (1):
> mx25: add CPU revision 1.2
>
> Eric Nelson (9):
> i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
> frame buffer
> i.MX: shut down video before launch of O/S
> i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields
> i.MX6: change register name for CCM_CHSCCDR to match ref. manual
> i.MX6: define bitfields for CHSCCDR register
> i.MX6: define IOMUX_GPR3 register bitfields
> i.MX6: Add ANATOP_PFD_480 bitfield constants
> i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields
> i.MX6: get rid of redundant struct src_regs (dupe of struct src)
>
> Fabio Estevam (9):
> mx28evk: Remove fecmxc_mii_postcall()
> mx6q: Factor out common DDR3 init code
> mx6: Add basic support for mx6qsabresd board.
> mx6qsabresd: Add Ethernet support
> mx6qsabresd: Add 8-bit USDHC support
> configs: mx6: Add a common config file
> mx6q: Add basic support for mx6qsabreauto
> mx6qsabreauto: Add Ethernet support
> configs: mx6qsabre_common.h: Use default clock definitions
>
> Matthias Weisser (1):
> imx: Use MXC_I2C_CLK in imx i2c driver
>
> Otavio Salvador (2):
> mx28evk: Add missing 'setexpr' command
> mx6qsabreauto: Use ttymxc3 as console
>
> MAINTAINERS | 2 +
> arch/arm/cpu/arm1136/mx31/generic.c | 1 +
> arch/arm/cpu/arm1136/mx35/asm-offsets.c | 33 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 1 +
> arch/arm/cpu/arm926ejs/mx25/generic.c | 66 +--
> arch/arm/cpu/armv7/mx5/clock.c | 454
> +++++++++++---------
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 112 ++---
> arch/arm/cpu/armv7/mx6/clock.c | 31 +-
> arch/arm/cpu/armv7/mx6/soc.c | 2 +-
> arch/arm/imx-common/cpu.c | 9 +
> arch/arm/imx-common/speed.c | 18 +-
> arch/arm/imx-common/timer.c | 12 +-
> arch/arm/include/asm/arch-mx25/clock.h | 14 +-
> arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx25/macro.h | 87 +++-
> arch/arm/include/asm/arch-mx31/clock.h | 1 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 16 +-
> arch/arm/include/asm/arch-mx35/clock.h | 1 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 52 +++
> arch/arm/include/asm/arch-mx5/clock.h | 22 +-
> arch/arm/include/asm/arch-mx5/crm_regs.h | 419
> +++++++++++++++++-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx6/clock.h | 15 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 364 ++++++++--------
> arch/arm/include/asm/arch-mx6/imx-regs.h | 166 ++++++-
> .../imximage.cfg => imx/ddr/mx6q_4x_mt41j128.cfg} | 0
> board/freescale/mx28evk/mx28evk.c | 25 --
> board/freescale/mx31ads/lowlevel_init.S | 4 +-
> board/freescale/mx51evk/mx51evk.c | 8 +
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qsabreauto/Makefile | 41 ++
> board/freescale/mx6qsabreauto/imximage.cfg | 159 +++++++
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 192 +++++++++
> board/freescale/mx6qsabresd/Makefile | 41 ++
> board/freescale/mx6qsabresd/mx6qsabresd.c | 198 +++++++++
> board/hale/tt01/tt01.c | 2 +-
> board/imx31_phycore/lowlevel_init.S | 2 +-
> board/karo/tx25/lowlevel_init.S | 42 +-
> board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
> boards.cfg | 4 +-
> drivers/i2c/mxc_i2c.c | 4 +-
> drivers/usb/host/ehci-mx5.c | 3 +-
> drivers/video/ipu_common.c | 12 +-
> drivers/video/mxc_ipuv3_fb.c | 20 +
> include/configs/ima3-mx53.h | 3 -
> include/configs/mx28evk.h | 1 +
> include/configs/mx31pdk.h | 10 +-
> include/configs/mx51_efikamx.h | 2 -
> include/configs/mx51evk.h | 3 +-
> include/configs/mx53ard.h | 2 -
> include/configs/mx53evk.h | 2 -
> include/configs/mx53loco.h | 2 -
> include/configs/mx53smd.h | 2 -
> include/configs/mx6qarm2.h | 2 -
> include/configs/mx6qsabre_common.h | 177 ++++++++
> include/configs/mx6qsabreauto.h | 22 +
> include/configs/mx6qsabrelite.h | 2 -
> include/configs/mx6qsabresd.h | 27 ++
> include/configs/vision2.h | 2 -
> include/ipu_pixfmt.h | 1 +
> 60 files changed, 2277 insertions(+), 645 deletions(-)
> rename board/freescale/{mx6qsabrelite/imximage.cfg =>
> imx/ddr/mx6q_4x_mt41j128.cfg} (100%)
> create mode 100644 board/freescale/mx6qsabreauto/Makefile
> create mode 100644 board/freescale/mx6qsabreauto/imximage.cfg
> create mode 100644 board/freescale/mx6qsabreauto/mx6qsabreauto.c
> create mode 100644 board/freescale/mx6qsabresd/Makefile
> create mode 100644 board/freescale/mx6qsabresd/mx6qsabresd.c
> create mode 100644 include/configs/mx6qsabre_common.h
> create mode 100644 include/configs/mx6qsabreauto.h
> create mode 100644 include/configs/mx6qsabresd.h
>
> Best regards,
> Stefano
>
Applied to u-boot-arm/next, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2012-10-09 16:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-08 9:56 [U-Boot] [PULL] : Please pull u-boot-imx/next Stefano Babic
2012-10-09 16:53 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121009185335.1f23cbee@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.