[PATCH 0/4] Add DT support for Network Space v2 and parents

[simon.guinot@sequanux.org (Simon Guinot)]

On Mon, Oct 15, 2012 at 01:01:44PM -0400, Jason Cooper wrote:
> Hey Simon,

Hi Jason,

> 
> On Mon, Oct 15, 2012 at 05:34:51PM +0200, Simon Guinot wrote:
> > This patch series provides DT support for LaCie NAS Network Space v2 and
> > parents. This includes the following machines:
> >  - Internet Space v2
> >  - Network Space v2
> >  - Network Space Max v2
> >  - Network Space Lite v2
> >  - Network Space Mini v2
> > 
> > Note that the three first boards are already supported by the Linux
> > kernel via an "old-fashion" board setup. The two lasts (Lite and Mini)
> > are new boards.
> 
> Have you checked building support for the old and new in one kernel?  On
> a quick check, it looks okay, but I only checked that ns2_init() wasn't
> the _init function for the legacy board files.

Yes, I have checked building with both old and DT board setups.

> 
> > Also note that the first patch of the series is related with the LED
> > subsystem. It adds device tree binding to the driver leds-ns2.
> > 
> > Simon Guinot (4):
> >   leds: leds-ns2: add device tree binding
> >   ARM: kirkwood: DT board setup for Network Space v2 and parents
> >   ARM: kirkwood: DT board setup for Network Space Lite v2
> >   ARM: kirkwood: DT board setup for Network Space Mini v2
> 
> I'm pretty sure this isn't the first version of this patch series ;-)
> No need to resend, but could you attach a version number and changelog?

Yes, you are right. For the second patch, it is the second version.
But all the other patches are at their first version. Then the whole
patch series is more a v1 than a v2. I am always embarrassed when the
patches versions are not the same within a series...

If you agree, I will reply against the second patch in order to
underline the changes.

Thanks,

Simon

> 
> thx,
> 
> Jason.
> 
> > 
> >  .../devicetree/bindings/gpio/leds-ns2.txt          |   26 ++++++
> >  arch/arm/boot/dts/Makefile                         |    5 ++
> >  arch/arm/boot/dts/kirkwood-is2.dts                 |   30 +++++++
> >  arch/arm/boot/dts/kirkwood-ns2-common.dtsi         |   63 ++++++++++++++
> >  arch/arm/boot/dts/kirkwood-ns2.dts                 |   30 +++++++
> >  arch/arm/boot/dts/kirkwood-ns2lite.dts             |   30 +++++++
> >  arch/arm/boot/dts/kirkwood-ns2max.dts              |   49 +++++++++++
> >  arch/arm/boot/dts/kirkwood-ns2mini.dts             |   49 +++++++++++
> >  arch/arm/mach-kirkwood/Kconfig                     |   36 ++++++++
> >  arch/arm/mach-kirkwood/Makefile                    |    5 ++
> >  arch/arm/mach-kirkwood/board-dt.c                  |   12 +++
> >  arch/arm/mach-kirkwood/board-ns2.c                 |   87 ++++++++++++++++++++
> >  arch/arm/mach-kirkwood/common.h                    |   10 +++
> >  drivers/leds/Kconfig                               |    4 +-
> >  drivers/leds/leds-ns2.c                            |   84 ++++++++++++++++++-
> >  15 files changed, 516 insertions(+), 4 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/gpio/leds-ns2.txt
> >  create mode 100644 arch/arm/boot/dts/kirkwood-is2.dts
> >  create mode 100644 arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> >  create mode 100644 arch/arm/boot/dts/kirkwood-ns2.dts
> >  create mode 100644 arch/arm/boot/dts/kirkwood-ns2lite.dts
> >  create mode 100644 arch/arm/boot/dts/kirkwood-ns2max.dts
> >  create mode 100644 arch/arm/boot/dts/kirkwood-ns2mini.dts
> >  create mode 100644 arch/arm/mach-kirkwood/board-ns2.c
> > 
> > -- 
> > 1.7.10
> > 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121015/db3504ec/attachment.sig>