On Wed, Oct 24, 2012 at 02:19:35PM -0700, Shaoming Feng wrote:

> /* Supplies and micbiases only bring the
>  * context up to STANDBY as unless something
>  * else is active and passing audio they
>   * generally don't require full power.  Signal
>   * generators are virtual pins and have no
>   * power impact themselves.
>   */

> According to the comment, the target bias level shouldn't be higher than STANDBY.

>                         case snd_soc_dapm_clock_supply:
>                         case snd_soc_dapm_micbias:
> -                               if (d->target_bias_level < SND_SOC_BIAS_STANDBY)
> +                              if (d->target_bias_level > SND_SOC_BIAS_STANDBY)
>                                         d->target_bias_level = SND_SOC_BIAS_STANDBY;

This will do the wrong thing - it'll mean that if we've already found
that we need a bias level over _STANDBY we'll pull back to only
selecting _STANDBY.  The intention here is that we should raise to
_STANDBY but this shouldn't distrupt operation of other widgets.