From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Jesse Barnes <jbarnes@virtuousgeek.org>,
Keith Packard <keithp@keithp.com>,
Timo Aaltonen <timo.aaltonen@canonical.com>
Subject: [ 18/31] drm/i915: apply timing generator bug workaround on CPT and PPT
Date: Thu, 25 Oct 2012 17:04:25 -0700 [thread overview]
Message-ID: <20121026000216.803084512@linuxfoundation.org> (raw)
In-Reply-To: <20121026000214.941721299@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jesse Barnes <jbarnes@virtuousgeek.org>
commit 3bcf603f6d5d18bd9d076dc280de71f48add4101 upstream.
On CougarPoint and PantherPoint PCH chips, the timing generator may fail
to start after DP training completes. This is due to a bug in the
FDI autotraining detect logic (which will stall the timing generator and
re-enable it once training completes), so disable it to avoid silent DP
mode setting failures.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++++
drivers/gpu/drm/i915/intel_display.c | 4 ++++
2 files changed, 9 insertions(+)
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3113,6 +3113,11 @@
#define TRANS_6BPC (2<<5)
#define TRANS_12BPC (3<<5)
+#define _TRANSA_CHICKEN2 0xf0064
+#define _TRANSB_CHICKEN2 0xf1064
+#define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
+#define TRANS_AUTOTRAIN_GEN_STALL_DIS (1<<31)
+
#define SOUTH_CHICKEN2 0xc2004
#define DPLS_EDP_PPS_FIX_DIS (1<<0)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7584,6 +7584,7 @@ static void ibx_init_clock_gating(struct
static void cpt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
@@ -7593,6 +7594,9 @@ static void cpt_init_clock_gating(struct
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
DPLS_EDP_PPS_FIX_DIS);
+ /* Without this, mode sets may fail silently on FDI */
+ for_each_pipe(pipe)
+ I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
}
static void ironlake_teardown_rc6(struct drm_device *dev)
next prev parent reply other threads:[~2012-10-26 0:50 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-26 0:04 [ 00/31] 3.0.49-stable review Greg Kroah-Hartman
2012-10-26 0:04 ` [ 01/31] arch/tile: avoid generating .eh_frame information in modules Greg Kroah-Hartman
2012-10-26 0:04 ` [ 02/31] NLM: nlm_lookup_file() may return NLMv4-specific error codes Greg Kroah-Hartman
2012-10-26 0:04 ` [ 03/31] oprofile, x86: Fix wrapping bug in op_x86_get_ctrl() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 04/31] SUNRPC: Prevent kernel stack corruption on long values of flush Greg Kroah-Hartman
2012-10-26 0:04 ` [ 05/31] Revert: lockd: use rpc clients cl_nodename for id encoding Greg Kroah-Hartman
2012-10-26 0:04 ` [ 06/31] pcmcia: sharpsl: dont discard sharpsl_pcmcia_ops Greg Kroah-Hartman
2012-10-26 0:04 ` [ 07/31] kernel/sys.c: fix stack memory content leak via UNAME26 Greg Kroah-Hartman
2012-10-26 0:04 ` [ 08/31] use clamp_t in UNAME26 fix Greg Kroah-Hartman
2012-10-26 0:11 ` Jonathan Nieder
2012-10-26 2:28 ` Greg Kroah-Hartman
2012-10-26 8:07 ` Jonathan Nieder
2012-10-26 0:04 ` [ 09/31] x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping Greg Kroah-Hartman
2012-10-26 0:04 ` [ 10/31] xen/x86: dont corrupt %eip when returning from a signal handler Greg Kroah-Hartman
2012-10-26 0:04 ` [ 11/31] USB: cdc-acm: fix pipe type of write endpoint Greg Kroah-Hartman
2012-10-26 0:04 ` [ 12/31] usb: acm: fix the computation of the number of data bits Greg Kroah-Hartman
2012-10-26 0:04 ` [ 13/31] USB: option: blacklist net interface on ZTE devices Greg Kroah-Hartman
2012-10-26 0:04 ` [ 14/31] USB: option: add more " Greg Kroah-Hartman
2012-10-26 0:04 ` [ 15/31] cgroup: notify_on_release may not be triggered in some cases Greg Kroah-Hartman
2012-10-26 0:04 ` [ 16/31] amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[] Greg Kroah-Hartman
2012-10-26 0:04 ` [ 17/31] media: au0828: fix case where STREAMOFF being called on stopped stream causes BUG() Greg Kroah-Hartman
2012-10-26 0:04 ` Greg Kroah-Hartman [this message]
2012-10-26 0:04 ` [ 19/31] net: Fix skb_under_panic oops in neigh_resolve_output Greg Kroah-Hartman
2012-10-26 0:04 ` [ 20/31] skge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboard Greg Kroah-Hartman
2012-10-26 0:04 ` [ 21/31] RDS: fix rds-ping spinlock recursion Greg Kroah-Hartman
2012-10-26 0:04 ` [ 22/31] tcp: resets are misrouted Greg Kroah-Hartman
2012-10-26 0:04 ` [ 23/31] sparc64: fix ptrace interaction with force_successful_syscall_return() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 24/31] sparc64: Like x86 we should check current->mm during perf backtrace generation Greg Kroah-Hartman
2012-10-26 0:04 ` [ 25/31] sparc64: Fix bit twiddling in sparc_pmu_enable_event() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 26/31] sparc64: do not clobber personality flags in sys_sparc64_personality() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 27/31] sparc64: Be less verbose during vmemmap population Greg Kroah-Hartman
2012-10-26 0:04 ` [ 28/31] xHCI: add cmd_ring_state Greg Kroah-Hartman
2012-10-26 0:04 ` [ 29/31] xHCI: add aborting command ring function Greg Kroah-Hartman
2012-10-26 0:04 ` [ 30/31] xHCI: cancel command after command timeout Greg Kroah-Hartman
2012-10-26 0:04 ` [ 31/31] xHCI: handle command after aborting the command ring Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121026000216.803084512@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jbarnes@virtuousgeek.org \
--cc=keithp@keithp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=timo.aaltonen@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.