All of lore.kernel.org
 help / color / mirror / Atom feed
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART
Date: Fri, 26 Oct 2012 23:34:26 +0200	[thread overview]
Message-ID: <20121026233426.4df62489@lilith> (raw)
In-Reply-To: <1349438998-10954-2-git-send-email-yann.vernier@orsoc.se>

Hi Yann,

On Fri,  5 Oct 2012 14:09:48 +0200, Yann Vernier
<yann.vernier@orsoc.se> wrote:

> CONFIG_BAUDRATE and KS8695_UART_LINEC_WLEN8 used for UART registers
> ---
>  arch/arm/cpu/arm920t/ks8695/lowlevel_init.S |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> index e9f1227..1bba571 100644
> --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> @@ -72,10 +72,10 @@ lowlevel_init:
>  	 * enable UART for early debug trace
>  	 */
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
> -	mov	r2, #0xd9
> -	str	r2, [r1]		/* 115200 baud */
> +	mov	r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
> +	str	r2, [r1]
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
> -	mov	r2, #0x03
> +	mov	r2, #KS8695_UART_LINEC_WLEN8
>  	str	r2, [r1]		/* 8 data bits, no parity, 1 stop */
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
>  	mov	r2, #0x41

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.

  reply	other threads:[~2012-10-26 21:34 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-05  8:05 [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support Yann Vernier
2012-07-05  9:48 ` Andreas Bießmann
2012-07-05 13:11   ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: " Yann Vernier
2012-07-05 15:04     ` Andreas Bießmann
2012-07-06  8:27       ` [U-Boot] [PATCH v3] " Yann Vernier
2012-07-06  8:47         ` Andreas Bießmann
2012-07-06 11:33           ` Albert ARIBAUD
2012-08-09 13:33             ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized Yann Vernier
2012-10-04  9:15               ` Albert ARIBAUD
2012-10-05 12:09                 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Yann Vernier
2012-10-05 12:09                   ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-10-26 21:34                     ` Albert ARIBAUD [this message]
2012-10-05 12:09                   ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-10-18 18:57                     ` Albert ARIBAUD
2012-11-19 11:55                       ` [U-Boot] [PATCH] " Yann Vernier
2012-11-19 12:29                         ` Yann Vernier
2012-11-20  0:05                           ` Marek Vasut
2012-10-05 12:09                   ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-10-18 19:00                     ` Albert ARIBAUD
2012-10-18 20:55                     ` Joe Hershberger
2012-10-19  8:02                       ` Yann Vernier
2012-10-26 21:37                         ` Albert ARIBAUD
2012-11-19 11:42                           ` Yann Vernier
2012-12-01 19:23                             ` Joe Hershberger
2012-10-05 12:09                   ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-10-05 12:09                   ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-10-05 12:09                   ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-10-18 19:09                     ` Albert ARIBAUD
2012-10-19  8:08                       ` Yann Vernier
2012-10-05 12:09                   ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-10-18 19:11                     ` Albert ARIBAUD
2012-10-05 12:09                   ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-10-05 12:09                   ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-10-18 19:13                     ` Albert ARIBAUD
2012-10-05 12:09                   ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-10-05 12:09                   ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-10-18 19:14                     ` Albert ARIBAUD
2012-11-10  8:03                   ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Albert ARIBAUD
2012-11-13 12:46                     ` Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-08-09 13:33             ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-07-05 13:22   ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-07-05 13:41     ` Yann Vernier
2012-07-05 15:19     ` Andreas Bießmann
2012-07-12 19:37       ` Albert ARIBAUD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121026233426.4df62489@lilith \
    --to=albert.u.boot@aribaud.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.