All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gustavo Padovan <gustavo@padovan.org>
To: Marcos Chaparro <marcos@mrkindustries.com.ar>
Cc: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ath3k: Add support for VAIO VPCEH [0489:e027]
Date: Tue, 6 Nov 2012 12:02:29 +0100	[thread overview]
Message-ID: <20121106110229.GA26682@joana> (raw)
In-Reply-To: <201211012138.20988.marcos@mrkindustries.com.ar>

Hi Marcos, 

* Marcos Chaparro <marcos@mrkindustries.com.ar> [2012-11-01 21:38:20 -0300]:

> Added Atheros AR3011 internal bluetooth device found in Sony VAIO VPCEH to the 
> devices list.
> Before this, the bluetooth module was identified as an Foxconn / Hai bluetooth 
> device [0489:e027], now it claims to be an AtherosAR3011 Bluetooth 
> [0cf3:3005].
> 
> # cat /sys/kernel/debug/usb/devices
> T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
> D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0489 ProdID=e027 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> 
> Signed-off by: Marcos A Chaparro <marcos@mrkindustries.com.ar>
> ---
> 
> Updated usb /sys/kernel/debug/usb/devices output. A complete powercycle flushed 
> the device firmware.
> 
> diff --git a/linux-3.7-rc3.orig/drivers/bluetooth/ath3k.c b/linux-3.7-
> rc3.new/drivers/bluetooth/ath3k.c
> index fc2de55..b00000e 100644
> --- a/linux-3.7-rc3.orig/drivers/bluetooth/ath3k.c
> +++ b/linux-3.7-rc3.new/drivers/bluetooth/ath3k.c
> @@ -67,6 +67,7 @@ static struct usb_device_id ath3k_table[] = {
>         { USB_DEVICE(0x13d3, 0x3304) },
>         { USB_DEVICE(0x0930, 0x0215) },
>         { USB_DEVICE(0x0489, 0xE03D) },
> +       { USB_DEVICE(0x0489, 0xE027) },
>  
>         /* Atheros AR9285 Malbec with sflash firmware */
>         { USB_DEVICE(0x03F0, 0x311D) },
> diff --git a/linux-3.7-rc3.orig/drivers/bluetooth/btusb.c b/linux-3.7-
> rc3.new/drivers/bluetooth/btusb.c
> index debda27..ee82f2f 100644
> --- a/linux-3.7-rc3.orig/drivers/bluetooth/btusb.c
> +++ b/linux-3.7-rc3.new/drivers/bluetooth/btusb.c
> @@ -124,6 +124,7 @@ static struct usb_device_id blacklist_table[] = {
>         { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
>         { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
>         { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
> +       { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
>  
>         /* Atheros AR9285 Malbec with sflash firmware */
>         { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },

Please generate your patch with git format-patch. It is currently not applying
because your patch has a few wrong information. Then use git send-email to
send your patch.

	Gustavo

  reply	other threads:[~2012-11-06 11:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-02  0:38 [PATCH] ath3k: Add support for VAIO VPCEH [0489:e027] Marcos Chaparro
2012-11-06 11:02 ` Gustavo Padovan [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-10-29 13:09 [PATCH] Add bluetooth " Marcos Chaparro
2012-10-31 18:25 ` Gustavo Padovan
2012-11-01 22:40   ` [PATCH] ath3k: Add " Marcos Chaparro
2012-11-01 22:53     ` Gustavo Padovan
2012-11-01 23:19       ` Marcos Chaparro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121106110229.GA26682@joana \
    --to=gustavo@padovan.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=marcos@mrkindustries.com.ar \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.