[PATCH v4 4/9] ARM: dts: support pinctrl single in pxa910

[tony@atomide.com (Tony Lindgren)]

Hi,

To clarify my binding change comment for the generic pinconf
support, here's an example.

We need to move pinctrl-single pinconf properties here for
each pin group:

* Haojian Zhuang <haojian.zhuang@gmail.com> [121107 07:21]:
> +				uart1_pins: pinmux_uart1_pins {
> +					pinctrl-single,pins = <
> +						0x198 0x6	/* GPIO47_UART1_RXD */
> +						0x19c 0x6	/* GPIO48_UART1_TXD */
> +					>;
> +					pinctrl-single,power-source = <0x2>;
> +					pinctrl-single,bias = <0x6>;
					pinctrl-single,power-source-mask = <0x1800>;
					pinctrl-single,bias-mask = <0xe000>;
					pinctrl-single,bias-disable = <0>;
					pinctrl-single,bias-pull-down = <0xa000>;
					pinctrl-single,bias-pull-up = <0xc000>;
> +				};



> --- a/arch/arm/boot/dts/pxa910.dtsi
> +++ b/arch/arm/boot/dts/pxa910.dtsi
> @@ -54,6 +54,80 @@
>  			reg = <0xd4000000 0x00200000>;
>  			ranges;
>  
> +			pmx: pinmux at d401e000 {
> +				compatible = "pinconf-single";
> +				reg = <0xd401e000 0x0330>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges;
> +
> +				pinctrl-single,register-width = <32>;
> +				pinctrl-single,function-mask = <7>;

And then..

> +				pinctrl-single,power-source-mask = <0x1800>;
> +				pinctrl-single,bias-mask = <0xe000>;
> +				pinctrl-single,bias-disable = <0>;
> +				pinctrl-single,bias-pull-down = <0xa000>;
> +				pinctrl-single,bias-pull-up = <0xc000>;
> +				pinctrl-single,input-schmitt-mask = <0x70>;

..remove these from here. Otherwise pinctrl-single,bits type controllers
won't be able to use the pinconf functions as we can have multiple pins
supported in a single register.

Regards,

Tony