From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices
Date: Sat, 10 Nov 2012 01:01:37 +0100 [thread overview]
Message-ID: <20121110010137.43bdaab4@wker> (raw)
In-Reply-To: <1352446951-12558-5-git-send-email-l.majewski@samsung.com>
Hi Lukasz,
On Fri, 09 Nov 2012 08:42:09 +0100
Lukasz Majewski <l.majewski@samsung.com> wrote:
...
> diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
> index c41f11d..e8c23f8 100644
> --- a/board/davedenx/qong/qong.c
> +++ b/board/davedenx/qong/qong.c
> @@ -28,7 +28,7 @@
> #include <asm/arch/sys_proto.h>
> #include <asm/io.h>
> #include <nand.h>
> -#include <pmic.h>
> +#include <power/pmic.h>
> #include <fsl_pmic.h>
> #include <asm/gpio.h>
> #include "qong_fpga.h"
> @@ -173,8 +173,8 @@ int board_late_init(void)
> u32 val;
> struct pmic *p;
>
> - pmic_init();
> - p = get_pmic();
> + pmic_init(I2C_PMIC);
> + p = pmic_get("FSL_PMIC");
Now the pmic struct is allocated dynamically, we should check if the
allocation failed and bail out in this case to prevent dereferencing
null pointer in pmic_get().
...
> diff --git a/drivers/misc/pmic_fsl.c b/drivers/misc/pmic_fsl.c
> index 0ff75ed..868c3c4 100644
> --- a/drivers/misc/pmic_fsl.c
> +++ b/drivers/misc/pmic_fsl.c
> @@ -23,7 +23,7 @@
>
> #include <common.h>
> #include <spi.h>
> -#include <pmic.h>
> +#include <power/pmic.h>
> #include <fsl_pmic.h>
>
> #if defined(CONFIG_PMIC_SPI)
> @@ -33,9 +33,9 @@ static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
> }
> #endif
>
> -int pmic_init(void)
> +int pmic_init(unsigned char bus)
> {
> - struct pmic *p = get_pmic();
> + struct pmic *p = pmic_alloc();
> static const char name[] = "FSL_PMIC";
>
> p->name = name;
> @@ -54,7 +54,7 @@ int pmic_init(void)
> p->interface = PMIC_I2C;
> p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
> p->hw.i2c.tx_num = 3;
> - p->bus = I2C_PMIC;
> + p->bus = bus;
In the case the pmic_alloc() fails this code is now writing to pmic
struct at NULL. Please check the return value of pmic_alloc() and
bail out if needed. This applies to other drivers changed by this
patch. Can you please fix it and resubmit a fixed patch 04/26.
Thanks,
Anatolij
next prev parent reply other threads:[~2012-11-10 0:01 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-09 7:42 [U-Boot] [PATCH v6 00/26] pmic: Redesign PMIC framework to support multiple instances of devices Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 01/26] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 02/26] pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 03/26] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices Lukasz Majewski
2012-11-10 0:01 ` Anatolij Gustschin [this message]
2012-11-12 8:23 ` Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 05/26] pmic: Introduce power_init_board() method at ./lib/board.c file Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 06/26] pmic: Enable power_board_init() support at TRATS Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 07/26] pmic:chrg: Common information about charger and battery (power_chrg.h) Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 08/26] pmic: Move pmic related code to ./drivers/power directory Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 09/26] pmic: Extend struct pmic to support battery and charger related operations Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 10/26] pmic:battery: Support for Trats Battery at PMIC framework Lukasz Majewski
2012-11-10 0:11 ` Anatolij Gustschin
2012-11-09 7:42 ` [U-Boot] [PATCH v6 11/26] pmic:muic: Support for MUIC built into MAX8997 device Lukasz Majewski
2012-11-10 0:17 ` Anatolij Gustschin
2012-11-09 7:42 ` [U-Boot] [PATCH v6 12/26] pmic:fuel-gauge: Support for MAX17042 fuel-gauge Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 13/26] pmic:max8997: Function for calculating LDO internal register value Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 14/26] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 15/26] arm:trats:pmic: Enable MUIC (MAX8997) at " Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 16/26] arm:trats:pmic: Enable fuel-gauge (MAX17042) " Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 17/26] arm:trats:pmic: Enable battery support " Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 18/26] pmic:max8997: Support for MAX8997 internal charger control Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 19/26] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 20/26] arm:trats:pmic: Support for charging battery at " Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 21/26] pmic: Extend PMIC framework to support battery related commands Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 22/26] power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 23/26] power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 24/26] power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 25/26] arm:goni:pmic: Adjust GONI target platform board to new PMIC framework Lukasz Majewski
2012-11-09 7:42 ` [U-Boot] [PATCH v6 26/26] arm:universal_c210:pmic: Adjust C210 Universal " Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121110010137.43bdaab4@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.