From: mturquette@ti.com (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs
Date: Fri, 16 Nov 2012 15:18:22 -0800 [thread overview]
Message-ID: <20121116231822.21126.36803@nucleus> (raw)
In-Reply-To: <1353100828-9218-2-git-send-email-maxime.ripard@free-electrons.com>
Quoting Maxime Ripard (2012-11-16 13:20:22)
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> Cc: Mike Turquette <mturquette@ti.com>
Acked-by: Mike Turquette <mturquette@linaro.or>
Regards,
Mike
> ---
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-sunxi.c | 30 ++++++++++++++++++++++++++++++
> include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++
> 3 files changed, 53 insertions(+)
> create mode 100644 drivers/clk/clk-sunxi.c
> create mode 100644 include/linux/clk/sunxi.h
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 71a25b9..9c300a8 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -19,6 +19,7 @@ endif
> obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
> obj-$(CONFIG_ARCH_U8500) += ux500/
> obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
> +obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o
>
> # Chip specific
> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c
> new file mode 100644
> index 0000000..0e831b5
> --- /dev/null
> +++ b/drivers/clk/clk-sunxi.c
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk/sunxi.h>
> +#include <linux/of.h>
> +
> +static const __initconst struct of_device_id clk_match[] = {
> + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
> + {}
> +};
> +
> +void __init sunxi_init_clocks(void)
> +{
> + of_clk_init(clk_match);
> +}
> diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
> new file mode 100644
> index 0000000..e074fdd
> --- /dev/null
> +++ b/include/linux/clk/sunxi.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LINUX_CLK_SUNXI_H_
> +#define __LINUX_CLK_SUNXI_H_
> +
> +void __init sunxi_init_clocks(void);
> +
> +#endif
> --
> 1.7.9.5
next prev parent reply other threads:[~2012-11-16 23:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-16 21:20 [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs Maxime Ripard
2012-11-16 21:20 ` [PATCH 1/7] clk: sunxi: Add dummy fixed rate clock " Maxime Ripard
2012-11-16 23:18 ` Mike Turquette [this message]
2012-11-16 21:20 ` [PATCH 2/7] clocksource: sunxi: Add Allwinner A1X Timer Driver Maxime Ripard
2012-11-16 21:20 ` [PATCH 3/7] irqchip: sunxi: Add irq controller driver Maxime Ripard
2012-11-16 21:20 ` [PATCH 4/7] ARM: sunxi: Add basic support for Allwinner A1x SoCs Maxime Ripard
2012-11-16 21:20 ` [PATCH 5/7] ARM: sunxi: Add earlyprintk support Maxime Ripard
2012-11-16 21:20 ` [PATCH 6/7] ARM: sunxi: Add device tree for the A13 and the Olinuxino board Maxime Ripard
2012-11-16 21:20 ` [PATCH 7/7] ARM: sunxi: Add entry to MAINTAINERS Maxime Ripard
2012-11-16 21:40 ` [PATCHv2 0/7] Add basic support for Allwinner A1X SoCs Arnd Bergmann
2012-11-16 22:00 ` Maxime Ripard
2012-11-16 22:10 ` Arnd Bergmann
2012-11-17 6:16 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121116231822.21126.36803@nucleus \
--to=mturquette@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.