From: Denys Dmytriyenko <denys@ti.com>
To: "Franklin S. Cooper Jr" <fcooperjr27@gmail.com>
Cc: meta-ti@yoctoproject.org
Subject: Re: [PATCH 1/2 v3] libgles-omap3: Adjust for non X11 distros
Date: Fri, 16 Nov 2012 23:18:20 -0500 [thread overview]
Message-ID: <20121117041820.GA9631@denix.org> (raw)
In-Reply-To: <1353093582-11469-1-git-send-email-fcooper@ti.com>
On Fri, Nov 16, 2012 at 01:19:41PM -0600, Franklin S. Cooper Jr wrote:
> * Non X11 base distros are unable to build this Graphics SDK.
> * This patch tweaks the libgles-omap3 include file to always build the
> Graphics SDK in Raw mode and also build in X11 mode only if X11 is
> a part of the DISTRO_FEATURE. Components are built, installed and packaged
> based on which mode the Graphics SDK is built in.
> * Create a new variable PVR_INIT that is by default set to pvrsrvinit. This is
> needed for newer version of the Graphics SDK that replaced this file.
>
> Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
This was one of the worst cases of inconsistent indentation - mixing in
4-space indentations where all the code was nicely tab-indented... Had to fix
all that manually, since I need the code ASAP. Let's pay attention to this in
the future. Thanks.
--
Denys
> ---
> Version 3 changes:
> Fix typo in commit message
> Removed rc.pvr change
>
> recipes-graphics/libgles/libgles-omap3.inc | 208 +++++++++++++++++-----------
> 1 files changed, 128 insertions(+), 80 deletions(-)
>
> diff --git a/recipes-graphics/libgles/libgles-omap3.inc b/recipes-graphics/libgles/libgles-omap3.inc
> index b7f563f..574cf17 100644
> --- a/recipes-graphics/libgles/libgles-omap3.inc
> +++ b/recipes-graphics/libgles/libgles-omap3.inc
> @@ -3,11 +3,15 @@ LICENSE = "proprietary-binary"
> # 'TSPA.txt' might not be the best file to md5sum
> LIC_FILES_CHKSUM = "file://TSPA.txt;md5=c0d5d9c1e38b41677144c4e24d6ddee1"
>
> -PR = "r33"
> +PR = "r34"
>
> COMPATIBLE_MACHINE = "(omap3|ti814x|ti816x|ti33x)"
>
> -DEPENDS = "virtual/libx11 libxau libxdmcp libdrm"
> +X11DEPENDS = "virtual/libx11 libxau libxdmcp libdrm"
> +DEPENDS = "${@base_contains('DISTRO_FEATURES', 'x11', '${X11DEPENDS}', '', d)}"
> +
> +export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
> +PVR_INIT ?= "pvrsrvinit"
>
> PROVIDES += "virtual/egl"
>
> @@ -31,11 +35,13 @@ export ES5LOCATION ?= "${S}/gfx_rel_es5.x"
> export ES6LOCATION ?= "${S}/gfx_rel_es6.x"
> export ES8LOCATION ?= "${S}/gfx_rel_es8.x"
>
> +LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"
> +
> do_configure() {
> # Attempt to fix up the worst offenders for file permissions
> for i in $(find ${S} -name "*.h") $(find ${S} -name "*.c") $(find ${S} -name "Make*") ; do
> chmod 0644 $i
> - done
> + done
>
> # Attempt to create proper library softlinks
> for sofile in $(find ${S} -name "lib*Open*.so") $(find ${S} -name "lib*srv*.so") $(find ${S} -name "lib*gl*.so") $(find ${S} -name "libpvr*.so") $(find ${S} -name "lib*GL*.so"); do
> @@ -64,62 +70,92 @@ PARALLEL_MAKE = ""
> PLATFORM ?= "LinuxOMAP3"
>
> do_compile() {
> - export X11ROOT="${STAGING_DIR_HOST}/usr"
> export TOOLCHAIN="${TOOLCHAIN_PATH}"
> -
> export PLAT_CC="${CC}"
> export PLAT_CPP="${CXX}"
> export PLAR_AR="${AR}"
>
> - mkdir -p ${S}/demos/raw
> - mkdir -p ${S}/demos/x11
> -
> - # Rebuild demos for both Raw and X11
> - for X11BUILD in 0 1 ; do
> - for demo in ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Demos/* ; do
> - cd $demo/OGLES/Build/LinuxGeneric
> - oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=$X11BUILD
> - rm $demo/OGLES/Build/${PLATFORM}/Release*/*.o
> - install -m 0755 $demo/OGLES/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 || true
> - sed -e s:NAME:$(basename $demo): \
> - -e s:EXEC:${bindir}/SGX/demos/X11/$(basename $demo/OGLES/Build/${PLATFORM}/ReleaseX11/*): \
> - ${WORKDIR}/sample.desktop > ${WORKDIR}/$(basename $demo).desktop
> - install -m 0755 $demo/OGLES/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw || true
> - done
> - for demo in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Demos/* ; do
> - cd $demo/OGLES2/Build/LinuxGeneric
> - oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=$X11BUILD
> - rm -f $demo/OGLES2/Build/${PLATFORM}/Release*/*.o
> - install -m 0755 $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 || true
> - sed -e s:NAME:$(basename $demo): \
> - -e s:EXEC:${bindir}/SGX/demos/X11/$(basename $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/*): \
> - ${WORKDIR}/sample.desktop > ${WORKDIR}/$(basename $demo).desktop
> - install -m 0755 $demo/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw || true
> - done
> - done
> -
> - mkdir -p ${S}/trainingcourses/raw
> - mkdir -p ${S}/trainingcourses/x11
> + if [ ${SUPPORT_XORG} -eq 1 ]
> + then
> + export X11ROOT="${STAGING_DIR_HOST}/usr"
> + mkdir -p ${S}/demos/x11
> + mkdir -p ${S}/trainingcourses/x11
> + fi
> +
> + mkdir -p ${S}/demos/raw
> + mkdir -p ${S}/trainingcourses/raw
> +
> + # Rebuild demos
> + for X11BUILD in 0 1 ; do
> + # Don't rebuild demos with X11 support for a non X11 distro
> + if [ ${SUPPORT_XORG} -eq 0 -a $X11BUILD -eq 1 ]
> + then
> + continue
> + fi
> +
> + for demo in ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Demos/* ; do
> + cd $demo/OGLES/Build/LinuxGeneric
> + oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=$X11BUILD
> + rm $demo/OGLES/Build/${PLATFORM}/Release*/*.o
> +
> + if [ $X11BUILD -eq 1 ]
> + then
> + install -m 0755 $demo/OGLES/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 || true
> + sed -e s:NAME:$(basename $demo): \
> + -e s:EXEC:${bindir}/SGX/demos/X11/$(basename $demo/OGLES/Build/${PLATFORM}/ReleaseX11/*): \
> + ${WORKDIR}/sample.desktop > ${WORKDIR}/$(basename $demo).desktop
> + else
> + install -m 0755 $demo/OGLES/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw || true
> + fi
> + done
> +
> + for demo in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Demos/* ; do
> + cd $demo/OGLES2/Build/LinuxGeneric
> + oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=$X11BUILD
> + rm -f $demo/OGLES2/Build/${PLATFORM}/Release*/*.o
> +
> + if [ $X11BUILD -eq 1 ]
> + then
> + install -m 0755 $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 || true
> + sed -e s:NAME:$(basename $demo): \
> + -e s:EXEC:${bindir}/SGX/demos/X11/$(basename $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/*): \
> + ${WORKDIR}/sample.desktop > ${WORKDIR}/$(basename $demo).desktop
> + else
> + install -m 0755 $demo/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw || true
> + fi
> + done
> + done
>
> find ${S} -name "*_org" -delete
>
> - # Build OGLES2 Trainingcourses for both Raw and X11
> - for X11BUILD in 0 1 ; do
> - for training in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/TrainingCourse/* ; do
> - if [ -e $training/OGLES2/Build/LinuxGeneric/Makefile ] ; then
> - cd $training/OGLES2/Build/LinuxGeneric
> - fi
> -
> - if [ -e $training/OGLES2/Build/${PLATFORM}/Makefile ] ; then
> - cd $training/OGLES2/Build/${PLATFORM}
> - fi
> -
> - oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=$X11BUILD
> - rm -f $training/OGLES2/Build/${PLATFORM}/Release*/*.o
> - install -m 0755 $training/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/trainingcourses/x11 || true
> - install -m 0755 $training/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/trainingcourses/raw || true
> - done
> - done
> + # Build OGLES2 Trainingcourses
> + for X11BUILD in 0 1 ; do
> + # Don't rebuild training courses with X11 support for a non X11 distro
> + if [ ${SUPPORT_XORG} -eq 0 -a $X11BUILD -eq 1 ]
> + then
> + continue
> + fi
> +
> + for training in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/TrainingCourse/* ; do
> + if [ -e $training/OGLES2/Build/LinuxGeneric/Makefile ] ; then
> + cd $training/OGLES2/Build/LinuxGeneric
> + fi
> +
> + if [ -e $training/OGLES2/Build/${PLATFORM}/Makefile ] ; then
> + cd $training/OGLES2/Build/${PLATFORM}
> + fi
> +
> + oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=$X11BUILD
> + rm -f $training/OGLES2/Build/${PLATFORM}/Release*/*.o
> +
> + if [ $X11BUILD -eq 1 ]
> + then
> + install -m 0755 $training/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/trainingcourses/x11 || true
> + else
> + install -m 0755 $training/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/trainingcourses/raw || true
> + fi
> + done
> + done
>
> }
>
> @@ -133,12 +169,14 @@ do_install () {
>
> install -m 0755 ${BINLOCATION}/*_test ${D}${bindir}/
> install -m 0755 ${BINLOCATION}/gl* ${D}${bindir}/
> - install -m 0755 ${BINLOCATION}/pvrsrvinit ${D}${bindir}/
> -
> - install -m 0755 ${BINLOCATION}/xgles1test1 ${D}${bindir}/
> + install -m 0755 ${BINLOCATION}/${PVR_INIT} ${D}${bindir}/
>
> - install -m 0755 ${BINLOCATION}/freedesktop/kdrive/usr/X11R6_SGX/bin/Xsgx ${D}${bindir}/|| true
> - cp -pPR ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Builds/OGLES2/${PLATFORM}/lib/*X11WS* ${D}${libdir} || true
> + if [ ${SUPPORT_XORG} -eq 1 ]
> + then
> + install -m 0755 ${BINLOCATION}/xgles1test1 ${D}${bindir}/
> + install -m 0755 ${BINLOCATION}/freedesktop/kdrive/usr/X11R6_SGX/bin/Xsgx ${D}${bindir}/|| true
> + cp -pPR ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Builds/OGLES2/${PLATFORM}/lib/*X11WS* ${D}${libdir} || true
> + fi
>
> install -d ${D}${includedir}
> cp -pPR ${S}/GFX_Linux_KM/include4 ${D}${includedir}/
> @@ -158,7 +196,7 @@ do_install () {
>
> install -d ${D}${sysconfdir}
> echo "[default]" > ${D}${sysconfdir}/powervr.ini
> - echo "WindowSystem=libpvrPVR2D_FRONTWSEGL.so.1" >> ${D}${sysconfdir}/powervr.ini
> + echo "WindowSystem=${LIBGLESWINDOWSYSTEM}" >> ${D}${sysconfdir}/powervr.ini
>
> # The ES2.x, ES3.x, ES5.x and ES6.x CPUs have different SGX hardware, so we need to install multiple sets of userspace
>
> @@ -174,11 +212,15 @@ do_install () {
> install -d ${D}${bindir}/ES3.0
> install -d ${D}${bindir}/ES2.0
>
> + shared_prog="eglinfo pvr2d_test ${PVR_INIT} services_test sgx_blit_test sgx_clipblit_test sgx_flip_test sgx_init_test sgx_render_flip_test"
> + raw_prog="gles1test1 gles2test1 ovg_unit_test"
> + x11_prog="eglinfo_x xgles1test1 xgles2test1 xmultiegltest xovg_unit_test"
> +
> for esrev in 2 3 5 6 8 ; do
> ESLOCATION=$(eval echo $(echo \$\{ES${esrev}LOCATION\}))
> if [ -e ${ESLOCATION} ] ; then
> cp -pPR ${ESLOCATION}/lib*${IMGPV} ${ESLOCATION}/pvr_drv.so ${ESLOCATION}/*.a ${D}${libdir}/ES${esrev}.0/
> - for esprog in eglinfo eglinfo_x gles1test1 gles2test1 ovg_unit_test pvr2d_test pvrsrvinit services_test sgx_blit_test sgx_clipblit_test sgx_flip_test sgx_init_test sgx_render_flip_test xgles1test1 xgles2test1 xmultiegltest xovg_unit_test ; do
> + for esprog in $shared_prog $raw_prog ${@base_contains('DISTRO_FEATURES', 'x11',"$x11_prog","",d)} ; do
> install -m 0755 ${ESLOCATION}/$esprog ${D}${bindir}/ES${esrev}.0/ || true
> done
> fi
> @@ -190,15 +232,19 @@ do_install () {
> cp ${WORKDIR}/*.desktop ${D}${prefix}/share/applications
> rm ${D}${prefix}/share/applications/sample.desktop
>
> - install -d ${D}${bindir}/SGX/demos/X11/
> - install -d ${D}${bindir}/SGX/demos/Raw/
> - install -m 0755 ${S}/demos/x11/* ${D}${bindir}/SGX/demos/X11/
> - install -m 0755 ${S}/demos/raw/* ${D}${bindir}/SGX/demos/Raw/
> + if [ ${SUPPORT_XORG} -eq 1 ]
> + then
> + install -d ${D}${bindir}/SGX/demos/X11/
> + install -m 0755 ${S}/demos/x11/* ${D}${bindir}/SGX/demos/X11/
> + install -d ${D}${bindir}/SGX/trainingcourses/X11
> + install -m 0755 ${S}/trainingcourses/x11/* ${D}${bindir}/SGX/trainingcourses/X11/
> + fi
> +
> + install -d ${D}${bindir}/SGX/demos/Raw/
> + install -m 0755 ${S}/demos/raw/* ${D}${bindir}/SGX/demos/Raw/
> + install -d ${D}${bindir}/SGX/trainingcourses/Raw
> + install -m 0755 ${S}/trainingcourses/raw/* ${D}${bindir}/SGX/trainingcourses/Raw/
>
> - install -d ${D}${bindir}/SGX/trainingcourses/Raw
> - install -d ${D}${bindir}/SGX/trainingcourses/X11
> - install -m 0755 ${S}/trainingcourses/x11/* ${D}${bindir}/SGX/trainingcourses/X11/
> - install -m 0755 ${S}/trainingcourses/raw/* ${D}${bindir}/SGX/trainingcourses/Raw/
>
> # Delete objects and linker scripts hidden between the headers
> find ${D} -name "*.o" -delete
> @@ -209,15 +255,8 @@ do_install () {
>
> }
>
> -PACKAGES =+ "${PN}-rawdemos \
> - ${PN}-x11demos \
> - ${PN}-rawtrainingcourses \
> - ${PN}-x11trainingcourses \
> -"
> -
> -PACKAGES += "xserver-kdrive-powervrsgx \
> - ${PN}-tests "
> -
> +PACKAGES =+ "${@base_contains('DISTRO_FEATURES', 'x11',"${PN}-x11demos ${PN}-x11trainingcourses xserver-kdrive-powervrsgx" ,"", d)} \
> + ${PN}-rawdemos ${PN}-rawtrainingcourses ${PN}-tests"
> # Package the base libraries per silicon revision
> PACKAGES =+ "${PN}-es2 ${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8"
> RRECOMMENDS_${PN} += "${PN}-es2 ${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8"
> @@ -234,7 +273,9 @@ PRIVATE_LIBS_${PN}-es5 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so li
> PRIVATE_LIBS_${PN}-es6 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
> PRIVATE_LIBS_${PN}-es8 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
>
> -PACKAGES =+ "${PN}-blitwsegl ${PN}-flipwsegl ${PN}-frontwsegl ${PN}-linuxfbwsegl ${PN}-x11wsegl ${PN}-driwsegl"
> +
> +PACKAGES =+ "${PN}-blitwsegl ${PN}-flipwsegl ${PN}-frontwsegl ${PN}-linuxfbwsegl"
> +PACKAGES =+ "${@base_contains('DISTRO_FEATURES', 'x11',"${PN}-x11wsegl ${PN}-driwsegl" ,"", d)}"
> FILES_${PN}-blitwsegl = "${libdir}/libpvrPVR2D_BLITWSEGL.so.*"
> FILES_${PN}-flipwsegl = "${libdir}/libpvrPVR2D_FLIPWSEGL.so.*"
> FILES_${PN}-frontwsegl = "${libdir}/libpvrPVR2D_FRONTWSEGL.so.*"
> @@ -242,7 +283,10 @@ FILES_${PN}-linuxfbwsegl = "${libdir}/libpvrPVR2D_LINUXFBWSEGL.so.*"
> FILES_${PN}-x11wsegl = "${libdir}/libpvrPVR2D_X11WSEGL.so* ${bindir}/x* ${bindir}/*x"
> FILES_${PN}-driwsegl = "${libdir}/libpvrPVR2D_DRIWSEGL.so* ${libdir}/libsrv_um_dri*"
>
> -PACKAGES =+ "${PN}-blitwsegl-es2 ${PN}-blitwsegl-es3 ${PN}-blitwsegl-es5 ${PN}-blitwsegl-es6 ${PN}-blitwsegl-es8 ${PN}-flipwsegl-es2 ${PN}-flipwsegl-es3 ${PN}-flipwsegl-es5 ${PN}-flipwsegl-es6 ${PN}-flipwsegl-es8 ${PN}-frontwsegl-es2 ${PN}-frontwsegl-es3 ${PN}-frontwsegl-es5 ${PN}-frontwsegl-es6 ${PN}-frontwsegl-es8 ${PN}-linuxfbwsegl-es2 ${PN}-linuxfbwsegl-es3 ${PN}-linuxfbwsegl-es5 ${PN}-linuxfbwsegl-es6 ${PN}-linuxfbwsegl-es8 ${PN}-x11wsegl-es2 ${PN}-x11wsegl-es3 ${PN}-x11wsegl-es5 ${PN}-x11wsegl-es6 ${PN}-x11wsegl-es8 ${PN}-driwsegl-es2 ${PN}-driwsegl-es3 ${PN}-driwsegl-es5 ${PN}-driwsegl-es6 ${PN}-driwsegl-es8"
> +PACKAGES =+ "${PN}-blitwsegl-es2 ${PN}-blitwsegl-es3 ${PN}-blitwsegl-es5 ${PN}-blitwsegl-es6 ${PN}-blitwsegl-es8 ${PN}-flipwsegl-es2 ${PN}-flipwsegl-es3 ${PN}-flipwsegl-es5 ${PN}-flipwsegl-es6 ${PN}-flipwsegl-es8 ${PN}-frontwsegl-es2 ${PN}-frontwsegl-es3 ${PN}-frontwsegl-es5 ${PN}-frontwsegl-es6 ${PN}-frontwsegl-es8 ${PN}-linuxfbwsegl-es2 ${PN}-linuxfbwsegl-es3 ${PN}-linuxfbwsegl-es5 ${PN}-linuxfbwsegl-es6 ${PN}-linuxfbwsegl-es8"
> +
> +X11_SEGL = " ${PN}-x11wsegl-es2 ${PN}-x11wsegl-es3 ${PN}-x11wsegl-es5 ${PN}-x11wsegl-es6 ${PN}-x11wsegl-es8 ${PN}-driwsegl-es2 ${PN}-driwsegl-es3 ${PN}-driwsegl-es5 ${PN}-driwsegl-es6 ${PN}-driwsegl-es8 "
> +PACKAGES =+ "${@base_contains('DISTRO_FEATURES', 'x11',"${X11_SEGL}" ,"", d)}"
> FILES_${PN}-blitwsegl-es2 = "${libdir}/ES2*/libpvrPVR2D_BLITWSEGL.so.*"
> FILES_${PN}-blitwsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_BLITWSEGL.so.*"
> FILES_${PN}-blitwsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_BLITWSEGL.so.*"
> @@ -287,7 +331,7 @@ RRECOMMENDS_${PN}-driwsegl = " ${PN}-driwsegl-es2 ${PN}-driwsegl-es3 ${PN}-driws
>
> CONFFILES_${PN} = "${sysconfdir}/powervr.ini"
>
> -FILES_${PN} = "${sysconfdir} ${libdir}/*.so* ${bindir}/pvrsrvinit ${bindir}/cputype ${bindir}/*"
> +FILES_${PN} = "${sysconfdir} ${libdir}/*.so* ${bindir}/${PVR_INIT} ${bindir}/cputype ${bindir}/*"
>
> FILES_xserver-kdrive-powervrsgx = "${bindir}/Xsgx"
> FILES_${PN}-tests = "${bindir}/*test*"
> @@ -335,8 +379,12 @@ INITSCRIPT_PARAMS = "start 30 5 2 . stop 40 0 1 6 ."
> pkg_postinst_${PN}_append() {
> rm -f $D${sysconfdir}/powervr-esrev
>
> -ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
> -ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
> +if [ ${SUPPORT_XORG} -eq 1 ]
> +then
> + ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
> + ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
> +fi
> +
> }
>
> pkg_postinst_${PN}-blitwsegl() {
> --
> 1.7.0.4
>
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>
prev parent reply other threads:[~2012-11-17 4:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-16 19:19 [PATCH 1/2 v3] libgles-omap3: Adjust for non X11 distros Franklin S. Cooper Jr
2012-11-16 19:19 ` [PATCH 2/2] libgles-omap3: Verify pvrsrvkm module was found Franklin S. Cooper Jr
2012-11-17 5:07 ` Denys Dmytriyenko
2012-11-17 5:09 ` Denys Dmytriyenko
2012-11-17 4:18 ` Denys Dmytriyenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121117041820.GA9631@denix.org \
--to=denys@ti.com \
--cc=fcooperjr27@gmail.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.