From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] pull request for u-boot-tegra/master into ARM/master
Date: Tue, 20 Nov 2012 07:21:25 +0100 [thread overview]
Message-ID: <20121120072125.6318ca8e@lilith> (raw)
In-Reply-To: <CA+m5__KuwiOwbVx2jku_zh6J_uJJThO9vPgKq4GBKGkhWgbM9w@mail.gmail.com>
Hi Tom,
On Mon, 19 Nov 2012 10:12:52 -0700, Tom Warren
<twarren.nvidia@gmail.com> wrote:
> Albert, please pull u-boot-tegra/master into ARM/master. Thanks!
>
> 'pxa' patch moved to before Simon's LCD patchset; MAKEALL -a arm AOK.
>
> The following changes since commit 7a5337732e3e05b2b0de1b592fa031b2c7b4f632:
> Rajeshwari Shinde (1):
> EXYNOS5: Enable SPI booting.
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-tegra master
>
> Allen Martin (1):
> tegra: add CONSOLE_MUX support to tegra-kbc
>
> Mayuresh Kulkarni (1):
> tegra: Enable display/lcd support on Seaboard
>
> Simon Glass (17):
> pxa: Disable dcache on palmld, palmtc, zipitz2
> tegra: Use const for pinmux_config_pingroup/table()
> tegra: Add display support to funcmux
> tegra: fdt: Add pwm binding and node
> tegra: fdt: Add LCD definitions for Tegra
> tegra: Add support for PWM
> tegra: Add LCD driver
> tegra: Add LCD support to Nvidia boards
> arm: Add control over cachability of memory regions
> lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
> lcd: Add support for flushing LCD fb from dcache after update
> tegra: Align LCD frame buffer to section boundary
> tegra: Support control of cache settings for LCD
> tegra: fdt: Add LCD definitions for Seaboard
> lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
> tegra: Remove unnecessary CONFIG_SYS_NAND_BASE
> tegra: config: seaboard: Move tegra-common-post to correct place
>
> Stephen Warren (4):
> ARM: tegra: TrimSlice: add support for USB1 port
> mmc: tegra: support 4-bit operation too on 8-bit slots
> ARM: tegra: enable 8-bit SD slots in board files
> tegra: use generic fs commands in BOOTCOMMAND
>
> Wei Ni (1):
> tegra: Add SOC support for display/lcd
>
> README | 16 +
> arch/arm/cpu/armv7/cache_v7.c | 11 +
> arch/arm/cpu/armv7/tegra20/Makefile | 2 +
> arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++++++++++
> arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++++
> arch/arm/cpu/tegra20-common/funcmux.c | 37 ++
> arch/arm/cpu/tegra20-common/pinmux.c | 4 +-
> arch/arm/dts/tegra20.dtsi | 105 +++++
> arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++++++++++++
> arch/arm/include/asm/arch-tegra20/display.h | 152 +++++++
> arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +-
> arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++++
> arch/arm/include/asm/system.h | 31 ++
> arch/arm/lib/cache-cp15.c | 51 ++-
> board/compal/paz00/paz00.c | 5 +-
> board/compulab/dts/tegra20-trimslice.dts | 3 +-
> board/compulab/trimslice/trimslice.c | 8 +
> board/nvidia/common/board.c | 24 +
> board/nvidia/dts/tegra20-seaboard.dts | 33 ++
> board/nvidia/harmony/harmony.c | 5 +-
> board/nvidia/seaboard/seaboard.c | 5 +-
> common/lcd.c | 89 ++++-
> common/main.c | 12 +-
> doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 +
> doc/device-tree-bindings/video/displaymode.txt | 42 ++
> doc/device-tree-bindings/video/tegra20-dc.txt | 85 ++++
> drivers/input/tegra-kbc.c | 18 +-
> drivers/mmc/tegra_mmc.c | 7 +-
> drivers/video/Makefile | 1 +
> drivers/video/tegra.c | 379 ++++++++++++++++
> include/configs/harmony.h | 4 +-
> include/configs/palmld.h | 3 +
> include/configs/palmtc.h | 3 +
> include/configs/paz00.h | 3 +
> include/configs/seaboard.h | 20 +-
> include/configs/tec.h | 1 -
> include/configs/tegra-common-post.h | 39 +-
> include/configs/tegra20-common.h | 3 +
> include/configs/trimslice.h | 4 +
> include/configs/ventana.h | 3 +
> include/configs/whistler.h | 3 +
> include/configs/zipitz2.h | 3 +
> include/fdtdec.h | 2 +
> include/lcd.h | 11 +
> lib/fdtdec.c | 2 +
> 45 files changed, 2303 insertions(+), 78 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/tegra20/display.c
> create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c
> create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h
> create mode 100644 arch/arm/include/asm/arch-tegra20/display.h
> create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h
> create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt
> create mode 100644 doc/device-tree-bindings/video/displaymode.txt
> create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt
> create mode 100644 drivers/video/tegra.c
>
>
> On Mon, Nov 19, 2012 at 8:39 AM, Tom Warren <twarren.nvidia@gmail.com> wrote:
> > That makes perfect sense - should have thought it through myself.
> >
> > I moved the pxa patch to before Simon's LCD patchset. Testing MAKEALL
> > -a arm now; should have a new pull request in a few hours.
> >
> > Thanks,
> >
> > Tom
> >
> > On Fri, Nov 16, 2012 at 5:12 PM, Albert ARIBAUD
> > <albert.u.boot@aribaud.net> wrote:
> >> Hi Tom,
> >>
> >> On Fri, 16 Nov 2012 16:42:49 -0700, Tom Warren
> >> <twarren.nvidia@gmail.com> wrote:
> >>
> >>> Albert,
> >>>
> >>> Please pull u-boot-tegra/master into ARM/master. The previously
> >>> failing pxa boards are fixed with 'pxa: Disable dcache on palmld,
> >>> palmtc, zipitz2'.
> >>
> >> Sorry to be a nuisance, but what I meant that I wanted all commits in
> >> the tegra pull req to succeed building if possible; with the added
> >> "disable cache" commit, the branch succeeds, but not all of its
> >> commits, which can hamper git bisects. Can the dcache disable patch
> >> actually appear before Simon's LCD commit?
> >>
> >> Amicalement,
> >> --
> >> Albert.
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-11-20 6:21 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-16 17:14 [U-Boot] pull request for u-boot-tegra/master into ARM/master Tom Warren
2012-11-16 21:27 ` Albert ARIBAUD
2012-11-16 21:45 ` Tom Warren
2012-11-16 23:33 ` Albert ARIBAUD
2012-11-16 23:42 ` Tom Warren
2012-11-17 0:12 ` Albert ARIBAUD
2012-11-19 15:39 ` Tom Warren
2012-11-19 17:12 ` Tom Warren
2012-11-20 6:21 ` Albert ARIBAUD [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-08-20 16:12 Tom Warren
2014-08-29 17:48 ` Tom Rini
2014-06-19 17:53 Tom Warren
2014-07-01 16:58 ` Albert ARIBAUD
2014-06-06 15:53 Tom Warren
2014-06-08 7:13 ` Albert ARIBAUD
2014-05-13 21:14 Tom Warren
2014-05-15 16:15 ` Albert ARIBAUD
2014-04-17 16:08 Tom Warren
2014-04-21 19:00 ` Albert ARIBAUD
2014-03-06 15:39 Tom Warren
2014-03-07 14:30 ` Albert ARIBAUD
2014-02-04 23:19 Tom Warren
2014-02-11 16:42 ` Stephen Warren
2014-02-11 16:48 ` Albert ARIBAUD
2014-02-11 16:59 ` Stephen Warren
2014-02-11 17:48 ` Albert ARIBAUD
2014-02-12 17:12 ` Albert ARIBAUD
2013-12-18 20:06 Tom Warren
2013-12-18 21:18 ` Albert ARIBAUD
2013-12-18 22:28 ` Tom Warren
2013-08-19 22:57 Tom Warren
2013-09-04 9:49 ` Albert ARIBAUD
2013-07-11 22:00 Tom Warren
2013-07-12 7:51 ` Albert ARIBAUD
2013-06-06 16:30 Tom Warren
2013-06-07 8:06 ` Albert ARIBAUD
2013-05-28 21:16 Tom Warren
2013-05-29 16:16 ` Albert ARIBAUD
2013-04-15 23:28 Tom Warren
2013-04-16 17:17 ` Albert ARIBAUD
2013-04-16 19:55 ` Stephen Warren
2013-04-16 20:02 ` Tom Warren
2013-04-17 6:56 ` Albert ARIBAUD
2013-04-16 20:55 ` Albert ARIBAUD
2013-03-25 17:43 Tom Warren
2013-03-26 10:12 ` Albert ARIBAUD
2013-03-15 15:25 Tom Warren
2013-03-15 20:46 ` Albert ARIBAUD
2013-01-18 16:00 Tom Warren
2013-01-18 16:06 ` Albert ARIBAUD
2012-10-29 23:49 Tom Warren
2012-11-03 9:03 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121120072125.6318ca8e@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.