From: NeilBrown <neilb@suse.de>
To: majianpeng <majianpeng@gmail.com>
Cc: linux-raid <linux-raid@vger.kernel.org>
Subject: Re: [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
Date: Tue, 20 Nov 2012 09:07:25 +1100 [thread overview]
Message-ID: <20121120090725.7de3348a@notabene.brown> (raw)
In-Reply-To: <201211191957314065143@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2790 bytes --]
On Mon, 19 Nov 2012 19:57:34 +0800 majianpeng <majianpeng@gmail.com> wrote:
> V0-->V1:
> As suggested by neil, it added a flag MD_RECOVERY_ERROR to differentiate between an
> abort-due-to-error and an abort-due-to-request.We only deal with the later case.
>
> Thanks!
> Jianpeng
>
> Aborting a resync maybe by io-error,or request(stop array or reboot
> system).
> So we add a flag MD_RECOVERY_ERROR to differentiate between an
> abort-due-to-error and an abort-due-to-request.
> For the later case,when resync aborted,it exec
> wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active)).
> So the ->curr_resync is the last completed request.
>
> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
> ---
> drivers/md/md.c | 10 ++++++++--
> drivers/md/md.h | 2 ++
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 9ab768a..5199657 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -7172,6 +7172,7 @@ void md_done_sync(struct mddev *mddev, int blocks, int ok)
> wake_up(&mddev->recovery_wait);
> if (!ok) {
> set_bit(MD_RECOVERY_INTR, &mddev->recovery);
> + set_bit(MD_RECOVERY_ERROR, &mddev->recovery);
> md_wakeup_thread(mddev->thread);
> // stop recovery, signal do_sync ....
> }
> @@ -7558,8 +7559,13 @@ void md_do_sync(struct md_thread *thread)
> printk(KERN_INFO
> "md: checkpointing %s of %s.\n",
> desc, mdname(mddev));
> - mddev->recovery_cp =
> - mddev->curr_resync_completed;
> + if (test_bit(MD_RECOVERY_ERROR,
> + &mddev->recovery_cp))
> + mddev->recovery_cp =
> + mddev->curr_resync_completed;
> + else
> + mddev->recovery_cp =
> + mddev->curr_resync;
> }
> } else
> mddev->recovery_cp = MaxSector;
> diff --git a/drivers/md/md.h b/drivers/md/md.h
> index af443ab..c29e62e 100644
> --- a/drivers/md/md.h
> +++ b/drivers/md/md.h
> @@ -307,6 +307,7 @@ struct mddev {
> * REQUEST: user-space has requested a sync (used with SYNC)
> * CHECK: user-space request for check-only, no repair
> * RESHAPE: A reshape is happening
> + * ERROR: sync-action interrupted because io-error
> *
> * If neither SYNC or RESHAPE are set, then it is a recovery.
> */
> @@ -320,6 +321,7 @@ struct mddev {
> #define MD_RECOVERY_CHECK 7
> #define MD_RECOVERY_RESHAPE 8
> #define MD_RECOVERY_FROZEN 9
> +#define MD_RECOVERY_ERROR 10
>
> unsigned long recovery;
> /* If a RAID personality determines that recovery (of a particular
The attachment still have MS-windows line endings ("\r\n" instead of just
"\n") but it wasn't too hard to strip those out.
Applied, thanks,
NeilBrown
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
next prev parent reply other threads:[~2012-11-19 22:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 11:57 [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed majianpeng
2012-11-19 22:07 ` NeilBrown [this message]
2012-11-20 1:06 ` majianpeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121120090725.7de3348a@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
--cc=majianpeng@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.