[U-Boot] Pull request: nand flash

[Tom Rini <trini@ti.com>]

On Mon, Nov 26, 2012 at 03:49:58PM -0600, Scott Wood wrote:

> The following changes since commit 178d0cc1a4c73c3341afbeb2a93b172de8c96bd1:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-video (2012-11-19 09:28:04 -0700)
> 
> are available in the git repository at:
> 
> 
>   git://git.denx.de/u-boot-nand-flash.git master
> 
> for you to fetch changes up to 3287f6d3858faee768a7c47515bd21914ad591a2:
> 
>   nand: Add torture feature (2012-11-26 15:41:29 -0600)
> 
> ----------------------------------------------------------------
> Beno?t Th?baudeau (3):
>       nand: Clean up nand_util
>       nand: Fix nand_erase_opts() offset check
>       nand: Add torture feature
> 
> Joe Hershberger (1):
>       nand: Move the sub-page read support enable to a flag
> 
> Jos? Miguel Gon?alves (1):
>       Add u-boot-pad.bin target to the Makefile
> 
> Karl O. Pinc (1):
>       README: Reference nand monitor commands in U-Boot README
> 
> Prabhakar Kushwaha (1):
>       driver/mtd:IFC NAND:Initialise internal SRAM before any write
> 
> Scott Wood (22):
>       serial/ns16550: don't build serial_ns16550 with MIN_FUNCTIONS
>       serial/ns16550: wait for TEMT before initializing
>       powerpc/mpc85xx: move debug tlb entry after TLB is in known state
>       powerpc/mpc85xx: add comma before "already enabled"
>       spl: rename u-boot-pad.bin to u-boot-with-spl.bin
>       spl: introduce CONFIG_SPL_TARGET
>       powerpc: change .fixup test to a GCC version test
>       powerpc/mpc85xx: fix TLB alignment
>       powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx
>       spl/mpc85xx: move udelay to cpu code
>       spl: include resetvec and lib8xxx
>       spl/mpc85xx: rename cpu_init_nand.c to spl_minimal.c
>       powerpc/mpc85xx: consistently use COBJS-y
>       spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
>       spl/85xx: new SPL support
>       powerpc/mpc85xx/p1_p2_rdb_pc: new SPL support
>       spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC.
>       spl/nand: config symbol documentation
>       powerpc/mpc85xx/p1_p2_rdb_pc: convert from nand_spl to new spl
>       powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory map
>       powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot
>       nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC drivers
> 
>  Makefile                                           |   22 ++-
>  README                                             |   45 ++++-
>  arch/powerpc/config.mk                             |    5 +
>  arch/powerpc/cpu/mpc85xx/Makefile                  |   38 ++--
>  arch/powerpc/cpu/mpc85xx/cpu.c                     |    3 +-
>  arch/powerpc/cpu/mpc85xx/cpu_init.c                |    2 +-
>  .../cpu/mpc85xx/{cpu_init_nand.c => spl_minimal.c} |   19 +-
>  arch/powerpc/cpu/mpc85xx/start.S                   |  123 ++++++-------
>  arch/powerpc/cpu/mpc85xx/tlb.c                     |    4 +-
>  arch/powerpc/cpu/mpc85xx/u-boot-spl.lds            |   87 +++++++++
>  arch/powerpc/cpu/mpc8xxx/Makefile                  |   17 ++
>  .../fsl_law.c => arch/powerpc/cpu/mpc8xxx/law.c    |   11 +-
>  arch/powerpc/lib/Makefile                          |   23 ++-
>  board/freescale/p1_p2_rdb_pc/Makefile              |   16 ++
>  board/freescale/p1_p2_rdb_pc/ddr.c                 |    2 +
>  board/freescale/p1_p2_rdb_pc/law.c                 |    2 +-
>  board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c        |    2 +-
>  .../freescale/p1_p2_rdb_pc/spl_minimal.c           |   10 +-
>  board/freescale/p1_p2_rdb_pc/tlb.c                 |   22 ++-
>  common/cmd_nand.c                                  |   22 +++
>  doc/README.mpc85xx                                 |    2 +-
>  doc/README.nand                                    |   21 +++
>  drivers/misc/Makefile                              |    1 -
>  drivers/mtd/nand/Makefile                          |   34 +++-
>  drivers/mtd/nand/fsl_elbc_nand.c                   |    2 +-
>  drivers/mtd/nand/fsl_elbc_spl.c                    |  168 +++++++++++++++++
>  drivers/mtd/nand/fsl_ifc_nand.c                    |   64 ++++++-
>  drivers/mtd/nand/nand_base.c                       |    9 +-
>  drivers/mtd/nand/nand_util.c                       |  188 ++++++++++++++++----
>  drivers/serial/ns16550.c                           |    3 +
>  drivers/serial/serial_ns16550.c                    |    4 +
>  include/configs/am3517_crane.h                     |    3 +
>  include/configs/am3517_evm.h                       |    3 +
>  include/configs/cam_enc_4xx.h                      |    3 +
>  include/configs/da850evm.h                         |    3 +
>  include/configs/devkit8000.h                       |    3 +
>  include/configs/hawkboard.h                        |    3 +
>  include/configs/igep00x0.h                         |    3 +
>  include/configs/mcx.h                              |    3 +
>  include/configs/omap3_beagle.h                     |    3 +
>  include/configs/omap3_evm.h                        |    3 +
>  include/configs/omap3_evm_quick_nand.h             |    3 +
>  include/configs/omap3_overo.h                      |    3 +
>  include/configs/p1_p2_rdb_pc.h                     |  137 +++++++-------
>  include/configs/tam3517-common.h                   |    3 +
>  include/configs/tricorder.h                        |    3 +
>  include/linux/mtd/nand.h                           |    7 +-
>  include/nand.h                                     |    1 +
>  nand_spl/board/freescale/common.c                  |   40 -----
>  nand_spl/board/freescale/mpc8536ds/Makefile        |   10 +-
>  nand_spl/board/freescale/mpc8569mds/Makefile       |   10 +-
>  nand_spl/board/freescale/mpc8572ds/Makefile        |   10 +-
>  nand_spl/board/freescale/p1010rdb/Makefile         |   16 +-
>  nand_spl/board/freescale/p1023rds/Makefile         |   16 +-
>  nand_spl/board/freescale/p1_p2_rdb/Makefile        |   10 +-
>  nand_spl/board/freescale/p1_p2_rdb_pc/Makefile     |  146 ---------------
>  spl/Makefile                                       |   21 +++
>  57 files changed, 980 insertions(+), 457 deletions(-)
>  rename arch/powerpc/cpu/mpc85xx/{cpu_init_nand.c => spl_minimal.c} (76%)
>  create mode 100644 arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
>  rename drivers/misc/fsl_law.c => arch/powerpc/cpu/mpc8xxx/law.c (95%)
>  rename nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c => board/freescale/p1_p2_rdb_pc/spl_minimal.c (94%)
>  create mode 100644 drivers/mtd/nand/fsl_elbc_spl.c
>  delete mode 100644 nand_spl/board/freescale/common.c
>  delete mode 100644 nand_spl/board/freescale/p1_p2_rdb_pc/Makefile

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121127/ea97b95c/attachment.pgp>