From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 3/5] mci: Allow to specify device name
Date: Fri, 30 Nov 2012 05:57:32 +0100 [thread overview]
Message-ID: <20121130045732.GA8327@game.jcrosoft.org> (raw)
In-Reply-To: <1354215748-25394-3-git-send-email-s.hauer@pengutronix.de>
On 20:02 Thu 29 Nov , Sascha Hauer wrote:
> When multiple MMC/SD cards are present in the system we often
> have to have persistent names to identify them during runtime.
> This patch allows to overwrite the devicename which is used.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/mci/mci-core.c | 10 +++++++---
> include/mci.h | 1 +
> 2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
> index 942d126..6e556a8 100644
> --- a/drivers/mci/mci-core.c
> +++ b/drivers/mci/mci-core.c
> @@ -1397,9 +1397,13 @@ static int mci_card_probe(struct mci *mci)
> mci->blk.dev = mci->mci_dev;
> mci->blk.ops = &mci_ops;
>
> - disknum = cdev_find_free_index("disk");
> + if (host->devname) {
> + mci->blk.cdev.name = strdup(host->devname);
can you use is a based name not the name
> + } else {
> + disknum = cdev_find_free_index("disk");
> + mci->blk.cdev.name = asprintf("disk%d", disknum);
> + }
>
> - mci->blk.cdev.name = asprintf("disk%d", disknum);
> mci->blk.blockbits = SECTOR_SHIFT;
> mci->blk.num_blocks = mci_calc_blk_cnt(mci->capacity, mci->blk.blockbits);
>
> @@ -1409,7 +1413,7 @@ static int mci_card_probe(struct mci *mci)
> goto on_error;
> }
>
> - dev_info(mci->mci_dev, "registered disk%d\n", disknum);
> + dev_info(mci->mci_dev, "registered %s\n", mci->blk.cdev.name);
>
> /* create partitions on demand */
> rc = parse_partition_table(&mci->blk);
> diff --git a/include/mci.h b/include/mci.h
> index db78b9c..0041e27 100644
> --- a/include/mci.h
> +++ b/include/mci.h
> @@ -286,6 +286,7 @@ struct mci_ios {
> /** host information */
> struct mci_host {
> struct device_d *hw_dev; /**< the host MCI hardware device */
> + char *devname; /**< the devicename for the card, defaults to disk%d */
> unsigned voltages;
> unsigned host_caps; /**< Host's interface capabilities, refer MMC_VDD_* */
> unsigned f_min; /**< host interface lower limit */
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-11-30 4:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-29 19:02 [PATCH 1/5] mci: Add STUFF_BITS and use it Sascha Hauer
2012-11-29 19:02 ` [PATCH 2/5] mci: Fix capacity calculation for high capacity MMC cards Sascha Hauer
2012-12-03 8:38 ` Sascha Hauer
2012-11-29 19:02 ` [PATCH 3/5] mci: Allow to specify device name Sascha Hauer
2012-11-30 4:57 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-30 8:06 ` Sascha Hauer
2012-11-30 10:10 ` Jean-Christophe PLAGNIOL-VILLARD
2012-12-03 8:33 ` Sascha Hauer
2012-11-29 19:02 ` [PATCH 4/5] mci i.MX esdhc: Allow to specify devicename from platformdata Sascha Hauer
2012-11-29 19:02 ` [PATCH 5/5] mci i.MX esdhc: turn error message into debug message Sascha Hauer
2012-12-05 19:02 ` [PATCH 1/5] mci: Add STUFF_BITS and use it Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121130045732.GA8327@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.