From: "Peter Hüwe" <PeterHuewe@gmx.de>
To: Kent Yoder <key@linux.vnet.ibm.com>
Cc: Mathias LEBLANC <Mathias.LEBLANC@st.com>,
"Jean-Luc BLANC" <jean-luc.blanc@st.com>,
"Sirrix@jasper.es" <Sirrix@jasper.es>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Rajiv Andrade <mail@srajiv.net>,
"tpmdd-devel@lists.sourceforge.net"
<tpmdd-devel@lists.sourceforge.net>,
Kent Yoder <shpedoikal@gmail.com>
Subject: Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x OOPS!
Date: Sat, 8 Dec 2012 05:00:26 +0100 [thread overview]
Message-ID: <201212080500.27146.PeterHuewe@gmx.de> (raw)
In-Reply-To: <20121206150645.GA27430@ennui.austin.ibm.com>
Hi,
since I don't have a tpm I simply tried out whether the handling without a tpm
is correct, which it unfortunately isn't as my kernel oopses.
Steps to reproduce:
# insmod /data/data-old/linux-2.6/drivers/char/tpm/tpm_i2c_stm_st33.ko
# echo st33zp24_i2c 0x20 /sys/bus/i2c/devices/i2c-1/new_device
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffffa02ff4ad>] tpm_st33_i2c_probe+0x87/0x21a [tpm_i2c_stm_st33]
PGD 3dcbbe067 PUD 3e994b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: tpm_i2c_stm_st33(O) tpm(O) tpm_bios(O) w83627ehf hwmon_vid
ipv6 snd_hda_codec_hdmi snd_hda_codec_realtek joydev usbhid coretemp kvm_intel
kvm ghash_clmulni_intel sg pcspkr snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm snd_timer snd i2c_i801 snd_page_alloc mei [last unloaded:
tpm_i2c_stm_st33]
CPU 2
Pid: 4454, comm: bash Tainted: G W O 3.6.9 #14 To Be Filled By O.E.M.
To Be Filled By O.E.M./Z77 Pro4
RIP: 0010:[<ffffffffa02ff4ad>] [<ffffffffa02ff4ad>] tpm_st33_i2c_probe+0x87/0x21a
[tpm_i2c_stm_st33]
RSP: 0018:ffff8803dcb87c18 EFLAGS: 00010286
RAX: ffff8803eb0d1800 RBX: ffff8803ff710400 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88041d0026d0 RDI: 0000000000000001
RBP: ffff8803dcb87c38 R08: 000000000000000b R09: 0000000000000001
R10: 0000000000000001 R11: ffff8803ff710400 R12: 0000000000000000
R13: ffff8803ff710c00 R14: ffff8803ff710c28 R15: ffff8803ff710c04
FS: 00007f520567a700(0000) GS:ffff88041f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 00000003e48b0000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process bash (pid: 4454, threadinfo ffff8803dcb86000, task ffff8803c87226c0)
Stack:
ffff8803ff710c28 ffffffffa02ffb80 ffffffffa02ff426 ffff8803ff710c00
ffff8803dcb87c78 ffffffff8134079a ffffffffa02ffe00 ffff8803ff710c28
00000000ffffffed ffffffffa02ffe00 0000000000000000 ffff88040ebe4460
Call Trace:
[<ffffffffa02ff426>] ? request_locality+0xc2/0xc2 [tpm_i2c_stm_st33]
[<ffffffff8134079a>] i2c_device_probe+0xa4/0xcd
[<ffffffff812b9c24>] driver_probe_device+0xa9/0x1bf
[<ffffffff812b9de9>] __device_attach+0x35/0x3a
[<ffffffff812b9db4>] ? __driver_attach+0x7a/0x7a
[<ffffffff812b84d7>] bus_for_each_drv+0x51/0x87
[<ffffffff812b9b3f>] device_attach+0x6e/0x8e
[<ffffffff812b91b0>] bus_probe_device+0x2d/0x98
[<ffffffff812b7ace>] device_add+0x3e1/0x548
[<ffffffff812bf2b3>] ? device_pm_init+0x60/0x84
[<ffffffff812b7c4c>] device_register+0x17/0x1b
[<ffffffff813410c4>] i2c_new_device+0x12b/0x175
[<ffffffff813411e4>] i2c_sysfs_new_device+0xd6/0x15a
[<ffffffff812b6394>] dev_attr_store+0x1b/0x1d
[<ffffffff81136f39>] sysfs_write_file+0xef/0x12b
[<ffffffff810e4ac3>] vfs_write+0xa9/0x119
[<ffffffff810e4cfa>] sys_write+0x45/0x6c
[<ffffffff814005a2>] system_call_fastpath+0x16/0x1b
Code: ff 48 c7 c6 a7 fa 2f a0 48 85 c0 48 89 c3 74 cd 48 8b 3d d7 d0 2a e1 be
d0 00 00 00 4d 8b a5 c8 00 00 00 e8 3b 32 de e0 48 85 c0 <49> 89 44 24 18 0f
84 5a 01 00 00 48 8b 3d b1 d0 2a e1 be d0 00
RIP [<ffffffffa02ff4ad>] tpm_st33_i2c_probe+0x87/0x21a [tpm_i2c_stm_st33]
RSP <ffff8803dcb87c18>
CR2: 0000000000000018
---[ end trace ddc5676681e8ed72 ]---
Thanks,
Peter
next prev parent reply other threads:[~2012-12-08 3:59 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 22:15 [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x Mathias Leblanc
2012-11-19 22:15 ` [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 2.6 Mathias Leblanc
2012-11-26 17:46 ` [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x Kent Yoder
2012-11-27 8:44 ` Mathias LEBLANC
2012-11-27 14:48 ` [tpmdd-devel] " Kent Yoder
2012-11-28 8:54 ` Mathias LEBLANC
2012-11-28 15:31 ` Kent Yoder
2012-11-28 17:48 ` Mathias LEBLANC
2012-11-28 19:04 ` Kent Yoder
2012-11-29 0:04 ` Peter Hüwe
2012-12-05 16:11 ` Mathias LEBLANC
2012-12-05 17:13 ` Kent Yoder
2012-12-05 17:45 ` Kent Yoder
2012-12-05 18:07 ` Kent Yoder
2012-12-05 20:20 ` Peter Hüwe
2012-12-05 21:00 ` Kent Yoder
2012-12-05 21:39 ` Peter Hüwe
2012-12-05 21:14 ` Peter Hüwe
2012-12-05 23:09 ` Kent Yoder
2012-12-06 0:10 ` Peter Hüwe
2012-12-06 15:06 ` Kent Yoder
2012-12-08 4:00 ` Peter Hüwe [this message]
[not found] ` <20130108172053.GA11223@ennui.austin.ibm.com>
2013-01-09 14:31 ` [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x OOPS! Mathias LEBLANC
2013-01-09 19:41 ` Peter Hüwe
2013-01-22 23:30 ` Kent Yoder
2012-12-06 0:20 ` [PATCH] char/tpm: Use struct dev_pm_ops for power management Peter Huewe
2012-12-06 15:07 ` Kent Yoder
2012-12-10 18:11 ` Mathias LEBLANC
2012-12-06 16:27 ` Kent Yoder
2012-12-08 3:55 ` Peter Hüwe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201212080500.27146.PeterHuewe@gmx.de \
--to=peterhuewe@gmx.de \
--cc=Mathias.LEBLANC@st.com \
--cc=Sirrix@jasper.es \
--cc=jean-luc.blanc@st.com \
--cc=key@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mail@srajiv.net \
--cc=shpedoikal@gmail.com \
--cc=tpmdd-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.