From: Grant Likely <grant.likely@secretlab.ca>
To: devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
davinci-linux-open-source@linux.davincidsp.com
Cc: rob@landley.net, nsekhar@ti.com, rob.herring@calxeda.com,
hs@denx.de, David.Woodhouse@intel.com,
artem.bityutskiy@linux.intel.com, "Kumar,
Anil" <anilkumar.v@ti.com>
Subject: Re: [PATCH] mtd: nand: davinci: fix the binding documentation
Date: Mon, 10 Dec 2012 23:00:43 +0000 [thread overview]
Message-ID: <20121210230043.150293E081F@localhost> (raw)
In-Reply-To: <1354871374-4984-1-git-send-email-anilkumar.v@ti.com>
On Fri, 7 Dec 2012 14:39:34 +0530, "Kumar, Anil" <anilkumar.v@ti.com> wrote:
> Since the aemif driver conversion to DT along with
> its movement to drivers/ folder is not yet done,
> fix NAND binding documentation to have NAND specific
> DT details only.
>
> Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Applied, thanks.
g.
> ---
> :100644 100644 e37241f... 49fc7ad... M Documentation/devicetree/bindings/arm/davinci/nand.txt
> .../devicetree/bindings/arm/davinci/nand.txt | 37 ++++++-------------
> 1 files changed, 12 insertions(+), 25 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
> index e37241f..49fc7ad 100644
> --- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
> +++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
> @@ -23,29 +23,16 @@ Recommended properties :
> - ti,davinci-nand-buswidth: buswidth 8 or 16
> - ti,davinci-nand-use-bbt: use flash based bad block table support.
>
> -Example (enbw_cmc board):
> -aemif@60000000 {
> - compatible = "ti,davinci-aemif";
> - #address-cells = <2>;
> - #size-cells = <1>;
> - reg = <0x68000000 0x80000>;
> - ranges = <2 0 0x60000000 0x02000000
> - 3 0 0x62000000 0x02000000
> - 4 0 0x64000000 0x02000000
> - 5 0 0x66000000 0x02000000
> - 6 0 0x68000000 0x02000000>;
> - nand@3,0 {
> - compatible = "ti,davinci-nand";
> - reg = <3 0x0 0x807ff
> - 6 0x0 0x8000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ti,davinci-chipselect = <1>;
> - ti,davinci-mask-ale = <0>;
> - ti,davinci-mask-cle = <0>;
> - ti,davinci-mask-chipsel = <0>;
> - ti,davinci-ecc-mode = "hw";
> - ti,davinci-ecc-bits = <4>;
> - ti,davinci-nand-use-bbt;
> - };
> +Example(da850 EVM ):
> +nand_cs3@62000000 {
> + compatible = "ti,davinci-nand";
> + reg = <0x62000000 0x807ff
> + 0x68000000 0x8000>;
> + ti,davinci-chipselect = <1>;
> + ti,davinci-mask-ale = <0>;
> + ti,davinci-mask-cle = <0>;
> + ti,davinci-mask-chipsel = <0>;
> + ti,davinci-ecc-mode = "hw";
> + ti,davinci-ecc-bits = <4>;
> + ti,davinci-nand-use-bbt;
> };
> --
> 1.7.4.1
>
--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
prev parent reply other threads:[~2012-12-10 23:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-07 9:09 [PATCH] mtd: nand: davinci: fix the binding documentation Kumar, Anil
2012-12-10 23:00 ` Grant Likely [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121210230043.150293E081F@localhost \
--to=grant.likely@secretlab.ca \
--cc=David.Woodhouse@intel.com \
--cc=anilkumar.v@ti.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=hs@denx.de \
--cc=linux-doc@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.