All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>,
	Alessandro Zummo <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] rtc-pcf8523: Add low battery voltage support
Date: Wed, 19 Dec 2012 14:03:58 -0800	[thread overview]
Message-ID: <20121219140358.8658ee86.akpm@linux-foundation.org> (raw)
In-Reply-To: <20121219160033.GF14217@axis.com>

On Wed, 19 Dec 2012 17:00:33 +0100
Jesper Nilsson <jesper.nilsson@axis.com> wrote:

> This patch implements reading of the battery voltage low signal for
> rtc-pcf8523.
> 
> The bit is read-only and cannot be cleared by software, so no
> clear-function is implemented.
> 
> ...
>
> --- a/drivers/rtc/rtc-pcf8523.c
> +++ b/drivers/rtc/rtc-pcf8523.c
> @@ -23,6 +23,7 @@
>  #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
>  #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
>  #define REG_CONTROL3_PM_MASK 0xe0
> +#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
>  
>  #define REG_SECONDS  0x03
>  #define REG_SECONDS_OS (1 << 7)
> @@ -250,9 +252,35 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
>  	return pcf8523_start_rtc(client);
>  }
>  
> +static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
> +			     unsigned long arg)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	u8 value;
> +	int ret = 0, err;
> +
> +	switch (cmd) {
> +	case RTC_VL_READ:
> +		err = pcf8523_read(client, REG_CONTROL3, &value);
> +		if (err < 0)
> +			return err;
> +
> +		if (value & REG_CONTROL3_BLF)
> +			ret = 1;
> +
> +		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
> +			return -EFAULT;
> +
> +		return 0;
> +	default:
> +		return -ENOIOCTLCMD;
> +	}
> +}
> +
>  static const struct rtc_class_ops pcf8523_rtc_ops = {
>  	.read_time = pcf8523_rtc_read_time,
>  	.set_time = pcf8523_rtc_set_time,
> +	.ioctl = pcf8523_rtc_ioctl,
>  };

Other drivers make the ioctl conditional on CONFIG_RTC_INTF_DEV,
presumably to avoid bloat.

--- a/drivers/rtc/rtc-pcf8523.c~rtc-pcf8523-add-low-battery-voltage-support-fix
+++ a/drivers/rtc/rtc-pcf8523.c
@@ -251,6 +251,7 @@ static int pcf8523_rtc_set_time(struct d
 	return pcf8523_start_rtc(client);
 }
 
+#ifdef CONFIG_RTC_INTF_DEV
 static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
 			     unsigned long arg)
 {
@@ -275,6 +276,9 @@ static int pcf8523_rtc_ioctl(struct devi
 		return -ENOIOCTLCMD;
 	}
 }
+#else
+#define pcf8523_rtc_ioctl NULL
+#endif
 
 static const struct rtc_class_ops pcf8523_rtc_ops = {
 	.read_time = pcf8523_rtc_read_time,
_



      reply	other threads:[~2012-12-19 22:04 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-19 14:04 [PATCH] rtc-pcf8523: Add low battery voltage support Jesper Nilsson
2012-12-19 14:42 ` Thierry Reding
2012-12-19 15:10   ` Jesper Nilsson
2012-12-19 15:19     ` Thierry Reding
2012-12-19 15:34       ` [PATCH v2] " Jesper Nilsson
2012-12-19 15:48         ` Thierry Reding
2012-12-19 16:00           ` [PATCH v3] " Jesper Nilsson
2012-12-19 22:03             ` Andrew Morton [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121219140358.8658ee86.akpm@linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=a.zummo@towertech.it \
    --cc=jesper.nilsson@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=thierry.reding@avionic-design.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.