From: Marek Lindner <lindner_marek@yahoo.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: netdev@vger.kernel.org, Pau Koning <paukoning@gmail.com>
Subject: Re: [B.A.T.M.A.N.] batman-adv: Unable to add interface in LXC
Date: Mon, 31 Dec 2012 15:11:24 +0800 [thread overview]
Message-ID: <201212311511.24877.lindner_marek@yahoo.de> (raw)
In-Reply-To: <CANiGF9-dq-HrvWrgu9EMC94rP=1YdrmaFbCF2g1SZ9ocu77ysw@mail.gmail.com>
On Monday, December 31, 2012 03:34:38 Pau Koning wrote:
> I am running LXC (SID) under Debian SID and the current git version of
> batman-adv (v3.7-rc7-1325-gaf5d4f7) +batctl (v2012.4.0-30-ga395164).
> But it fails to add any of my interfaces and non-batman-adv interfaces
> can be created without problems
>
> # ip link
> 13: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP mode DEFAULT qlen 1000
> link/ether 00:ff:aa:00:00:01 brd ff:ff:ff:ff:ff:ff
> 15: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> mode DEFAULT
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> # batctl if add eth0
> Error - can't open file '/sys/class/net/eth0/batman_adv/mesh_iface':
> Read-only file system
Did you check your kernel log messages ? I'd expect batman-adv to print
something there in case of an error.
Cheers,
Marek
next prev parent reply other threads:[~2012-12-31 7:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-30 19:34 [B.A.T.M.A.N.] batman-adv: Unable to add interface in LXC Pau Koning
2012-12-31 7:11 ` Marek Lindner [this message]
2013-01-21 9:11 ` Pau Koning
2013-01-24 12:17 ` Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201212311511.24877.lindner_marek@yahoo.de \
--to=lindner_marek@yahoo.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=netdev@vger.kernel.org \
--cc=paukoning@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.