From: Marcelo Tosatti <mtosatti@redhat.com>
To: Yang Zhang <yang.z.zhang@intel.com>
Cc: kvm@vger.kernel.org, gleb@redhat.com, haitao.shan@intel.com,
Kevin Tian <kevin.tian@intel.com>
Subject: Re: [PATCH v9 1/3] x86, apicv: add APICv register virtualization support
Date: Thu, 10 Jan 2013 18:25:04 -0200 [thread overview]
Message-ID: <20130110202504.GA9830@amt.cnet> (raw)
In-Reply-To: <1357802768-15816-2-git-send-email-yang.z.zhang@intel.com>
On Thu, Jan 10, 2013 at 03:26:06PM +0800, Yang Zhang wrote:
> - APIC read doesn't cause VM-Exit
> - APIC write becomes trap-like
>
> Signed-off-by: Kevin Tian <kevin.tian@intel.com>
> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
> ---
> arch/x86/include/asm/vmx.h | 2 ++
> arch/x86/kvm/lapic.c | 15 +++++++++++++++
> arch/x86/kvm/lapic.h | 2 ++
> arch/x86/kvm/vmx.c | 33 ++++++++++++++++++++++++++++++++-
> 4 files changed, 51 insertions(+), 1 deletions(-)
>
> diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
> index e385df9..44c3f7e 100644
> --- a/arch/x86/include/asm/vmx.h
> +++ b/arch/x86/include/asm/vmx.h
> @@ -66,6 +66,7 @@
> #define EXIT_REASON_EPT_MISCONFIG 49
> #define EXIT_REASON_WBINVD 54
> #define EXIT_REASON_XSETBV 55
> +#define EXIT_REASON_APIC_WRITE 56
> #define EXIT_REASON_INVPCID 58
>
> #define VMX_EXIT_REASONS \
> @@ -141,6 +142,7 @@
> #define SECONDARY_EXEC_ENABLE_VPID 0x00000020
> #define SECONDARY_EXEC_WBINVD_EXITING 0x00000040
> #define SECONDARY_EXEC_UNRESTRICTED_GUEST 0x00000080
> +#define SECONDARY_EXEC_APIC_REGISTER_VIRT 0x00000100
> #define SECONDARY_EXEC_PAUSE_LOOP_EXITING 0x00000400
> #define SECONDARY_EXEC_ENABLE_INVPCID 0x00001000
>
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 9392f52..0664c13 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -1212,6 +1212,21 @@ void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu)
> }
> EXPORT_SYMBOL_GPL(kvm_lapic_set_eoi);
>
> +/* emulate APIC access in a trap manner */
> +void kvm_apic_write_nodecode(struct kvm_vcpu *vcpu, u32 offset)
> +{
> + u32 val = 0;
> +
> + /* hw has done the conditional check and inst decode */
> + offset &= 0xff0;
> +
> + apic_reg_read(vcpu->arch.apic, offset, 4, &val);
> +
> + /* TODO: optimize to just emulate side effect w/o one more write */
> + apic_reg_write(vcpu->arch.apic, offset, val);
> +}
> +EXPORT_SYMBOL_GPL(kvm_apic_write_nodecode);
> +
> void kvm_free_lapic(struct kvm_vcpu *vcpu)
> {
> struct kvm_lapic *apic = vcpu->arch.apic;
> diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
> index e5ebf9f..9a8ee22 100644
> --- a/arch/x86/kvm/lapic.h
> +++ b/arch/x86/kvm/lapic.h
> @@ -64,6 +64,8 @@ int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
> u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu);
> void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data);
>
> +void kvm_apic_write_nodecode(struct kvm_vcpu *vcpu, u32 offset);
> +
> void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
> void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
> void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 55dfc37..688f43f 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -84,6 +84,9 @@ module_param(vmm_exclusive, bool, S_IRUGO);
> static bool __read_mostly fasteoi = 1;
> module_param(fasteoi, bool, S_IRUGO);
>
> +static bool __read_mostly enable_apicv_reg_vid = 1;
> +module_param(enable_apicv_reg_vid, bool, S_IRUGO);
> +
> /*
> * If nested=1, nested virtualization is supported, i.e., guests may use
> * VMX and be a hypervisor for its own guests. If nested=0, guests may not
> @@ -764,6 +767,12 @@ static inline bool cpu_has_vmx_virtualize_apic_accesses(void)
> SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
> }
>
> +static inline bool cpu_has_vmx_apic_register_virt(void)
> +{
> + return vmcs_config.cpu_based_2nd_exec_ctrl &
> + SECONDARY_EXEC_APIC_REGISTER_VIRT;
> +}
> +
> static inline bool cpu_has_vmx_flexpriority(void)
> {
> return cpu_has_vmx_tpr_shadow() &&
> @@ -2541,7 +2550,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
> SECONDARY_EXEC_UNRESTRICTED_GUEST |
> SECONDARY_EXEC_PAUSE_LOOP_EXITING |
> SECONDARY_EXEC_RDTSCP |
> - SECONDARY_EXEC_ENABLE_INVPCID;
> + SECONDARY_EXEC_ENABLE_INVPCID |
> + SECONDARY_EXEC_APIC_REGISTER_VIRT;
> if (adjust_vmx_controls(min2, opt2,
> MSR_IA32_VMX_PROCBASED_CTLS2,
> &_cpu_based_2nd_exec_control) < 0)
> @@ -2552,6 +2562,11 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
> SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
> _cpu_based_exec_control &= ~CPU_BASED_TPR_SHADOW;
> #endif
> +
> + if (!(_cpu_based_exec_control & CPU_BASED_TPR_SHADOW))
> + _cpu_based_2nd_exec_control &= ~(
> + SECONDARY_EXEC_APIC_REGISTER_VIRT);
No need for () around SECONDARY_EXEC_APIC_REGISTER_VIRT.
next prev parent reply other threads:[~2013-01-10 21:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-10 7:26 [PATCH v9 0/3] x86, apicv: Add APIC virtualization support Yang Zhang
2013-01-10 7:26 ` [PATCH v9 1/3] x86, apicv: add APICv register " Yang Zhang
2013-01-10 20:25 ` Marcelo Tosatti [this message]
2013-01-10 7:26 ` [PATCH v9 2/3] x86, apicv: add virtual x2apic support Yang Zhang
2013-01-10 7:55 ` Gleb Natapov
2013-01-10 8:32 ` Zhang, Yang Z
2013-01-10 8:52 ` Gleb Natapov
2013-01-10 11:54 ` Zhang, Yang Z
2013-01-10 12:16 ` Gleb Natapov
2013-01-10 12:22 ` Zhang, Yang Z
2013-01-10 12:34 ` Gleb Natapov
2013-01-11 7:36 ` Zhang, Yang Z
2013-01-11 16:54 ` Gleb Natapov
2013-01-14 1:03 ` Zhang, Yang Z
2013-01-14 1:14 ` Zhang, Yang Z
2013-01-11 2:37 ` Zhang, Yang Z
2013-01-11 13:51 ` Gleb Natapov
2013-01-10 8:25 ` Gleb Natapov
2013-01-10 8:31 ` Zhang, Yang Z
2013-01-10 8:53 ` Gleb Natapov
2013-01-10 7:26 ` [PATCH v9 3/3] x86, apicv: add virtual interrupt delivery support Yang Zhang
2013-01-10 8:23 ` Gleb Natapov
2013-01-10 12:04 ` Zhang, Yang Z
2013-01-10 21:36 ` Marcelo Tosatti
2013-01-11 14:09 ` Gleb Natapov
2013-01-11 17:58 ` Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130110202504.GA9830@amt.cnet \
--to=mtosatti@redhat.com \
--cc=gleb@redhat.com \
--cc=haitao.shan@intel.com \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.