From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Fri, 11 Jan 2013 22:23:36 +0000 Subject: Re: [lm-sensors] Help to make lm-sensors work with an Asus TUSL2-C Message-Id: <20130111222336.GA5118@roeck-us.net> List-Id: References: <50DB2017.8010403@tiscali.it> In-Reply-To: <50DB2017.8010403@tiscali.it> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Fri, Jan 11, 2013 at 09:08:03PM +0100, Mauro Molinari wrote: > Il 11/01/2013 19:59, Guenter Roeck ha scritto: > >>Hi Jean! > >>I looked at the mainboard again as you suggested. The Super I/O chip > >>is a Winbond W83627GF-AW. > >> > >I think that may be W83627SF, not GF. Datasheet is on the web. > >If so, it does not support hardware monitoring. > > Well, maybe the serigraphy on the chip is wrong, but it actually > says GF. I double checked it once again. If you search with Google, > you'll find some retailers that sell it. > > Here is the datasheet for the W83627G-AW (without the "F" - I don't > know if it may apply or not): > http://pdf1.alldatasheet.com/datasheet-pdf/view/203870/WINBOND/W83627G-AW.html > That points to the W83627HF/HG datasheet. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors