From: Ben Hutchings <ben@decadent.org.uk>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Hugh Dickins <hughd@google.com>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: [ 10/49] tmpfs mempolicy: fix /proc/mounts corrupting memory
Date: Sun, 13 Jan 2013 17:43:05 +0000 [thread overview]
Message-ID: <20130113174257.928401327@decadent.org.uk> (raw)
In-Reply-To: <20130113174255.736888844@decadent.org.uk>
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugh Dickins <hughd@google.com>
commit f2a07f40dbc603c15f8b06e6ec7f768af67b424f upstream.
Recently I suggested using "mount -o remount,mpol=local /tmp" in NUMA
mempolicy testing. Very nasty. Reading /proc/mounts, /proc/pid/mounts
or /proc/pid/mountinfo may then corrupt one bit of kernel memory, often
in a page table (causing "Bad swap" or "Bad page map" warning or "Bad
pagetable" oops), sometimes in a vm_area_struct or rbnode or somewhere
worse. "mpol=prefer" and "mpol=prefer:Node" are equally toxic.
Recent NUMA enhancements are not to blame: this dates back to 2.6.35,
when commit e17f74af351c "mempolicy: don't call mpol_set_nodemask() when
no_context" skipped mpol_parse_str()'s call to mpol_set_nodemask(),
which used to initialize v.preferred_node, or set MPOL_F_LOCAL in flags.
With slab poisoning, you can then rely on mpol_to_str() to set the bit
for node 0x6b6b, probably in the next page above the caller's stack.
mpol_parse_str() is only called from shmem_parse_options(): no_context
is always true, so call it unused for now, and remove !no_context code.
Set v.nodes or v.preferred_node or MPOL_F_LOCAL as mpol_to_str() might
expect. Then mpol_to_str() can ignore its no_context argument also,
the mpol being appropriately initialized whether contextualized or not.
Rename its no_context unused too, and let subsequent patch remove them
(that's not needed for stable backporting, which would involve rejects).
I don't understand why MPOL_LOCAL is described as a pseudo-policy:
it's a reasonable policy which suffers from a confusing implementation
in terms of MPOL_PREFERRED with MPOL_F_LOCAL. I believe this would be
much more robust if MPOL_LOCAL were recognized in switch statements
throughout, MPOL_F_LOCAL deleted, and MPOL_PREFERRED use the (possibly
empty) nodes mask like everyone else, instead of its preferred_node
variant (I presume an optimization from the days before MPOL_LOCAL).
But that would take me too long to get right and fully tested.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
mm/mempolicy.c | 64 +++++++++++++++++++++++---------------------------------
1 file changed, 26 insertions(+), 38 deletions(-)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2334,8 +2334,7 @@ void numa_default_policy(void)
*/
/*
- * "local" is pseudo-policy: MPOL_PREFERRED with MPOL_F_LOCAL flag
- * Used only for mpol_parse_str() and mpol_to_str()
+ * "local" is implemented internally by MPOL_PREFERRED with MPOL_F_LOCAL flag.
*/
#define MPOL_LOCAL MPOL_MAX
static const char * const policy_modes[] =
@@ -2350,28 +2349,21 @@ static const char * const policy_modes[]
#ifdef CONFIG_TMPFS
/**
- * mpol_parse_str - parse string to mempolicy
+ * mpol_parse_str - parse string to mempolicy, for tmpfs mpol mount option.
* @str: string containing mempolicy to parse
* @mpol: pointer to struct mempolicy pointer, returned on success.
- * @no_context: flag whether to "contextualize" the mempolicy
+ * @unused: redundant argument, to be removed later.
*
* Format of input:
* <mode>[=<flags>][:<nodelist>]
*
- * if @no_context is true, save the input nodemask in w.user_nodemask in
- * the returned mempolicy. This will be used to "clone" the mempolicy in
- * a specific context [cpuset] at a later time. Used to parse tmpfs mpol
- * mount option. Note that if 'static' or 'relative' mode flags were
- * specified, the input nodemask will already have been saved. Saving
- * it again is redundant, but safe.
- *
* On success, returns 0, else 1
*/
-int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context)
+int mpol_parse_str(char *str, struct mempolicy **mpol, int unused)
{
struct mempolicy *new = NULL;
unsigned short mode;
- unsigned short uninitialized_var(mode_flags);
+ unsigned short mode_flags;
nodemask_t nodes;
char *nodelist = strchr(str, ':');
char *flags = strchr(str, '=');
@@ -2459,24 +2451,23 @@ int mpol_parse_str(char *str, struct mem
if (IS_ERR(new))
goto out;
- if (no_context) {
- /* save for contextualization */
- new->w.user_nodemask = nodes;
- } else {
- int ret;
- NODEMASK_SCRATCH(scratch);
- if (scratch) {
- task_lock(current);
- ret = mpol_set_nodemask(new, &nodes, scratch);
- task_unlock(current);
- } else
- ret = -ENOMEM;
- NODEMASK_SCRATCH_FREE(scratch);
- if (ret) {
- mpol_put(new);
- goto out;
- }
- }
+ /*
+ * Save nodes for mpol_to_str() to show the tmpfs mount options
+ * for /proc/mounts, /proc/pid/mounts and /proc/pid/mountinfo.
+ */
+ if (mode != MPOL_PREFERRED)
+ new->v.nodes = nodes;
+ else if (nodelist)
+ new->v.preferred_node = first_node(nodes);
+ else
+ new->flags |= MPOL_F_LOCAL;
+
+ /*
+ * Save nodes for contextualization: this will be used to "clone"
+ * the mempolicy in a specific context [cpuset] at a later time.
+ */
+ new->w.user_nodemask = nodes;
+
err = 0;
out:
@@ -2496,13 +2487,13 @@ out:
* @buffer: to contain formatted mempolicy string
* @maxlen: length of @buffer
* @pol: pointer to mempolicy to be formatted
- * @no_context: "context free" mempolicy - use nodemask in w.user_nodemask
+ * @unused: redundant argument, to be removed later.
*
* Convert a mempolicy into a string.
* Returns the number of characters in buffer (if positive)
* or an error (negative)
*/
-int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context)
+int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int unused)
{
char *p = buffer;
int l;
@@ -2528,7 +2519,7 @@ int mpol_to_str(char *buffer, int maxlen
case MPOL_PREFERRED:
nodes_clear(nodes);
if (flags & MPOL_F_LOCAL)
- mode = MPOL_LOCAL; /* pseudo-policy */
+ mode = MPOL_LOCAL;
else
node_set(pol->v.preferred_node, nodes);
break;
@@ -2536,10 +2527,7 @@ int mpol_to_str(char *buffer, int maxlen
case MPOL_BIND:
/* Fall through */
case MPOL_INTERLEAVE:
- if (no_context)
- nodes = pol->w.user_nodemask;
- else
- nodes = pol->v.nodes;
+ nodes = pol->v.nodes;
break;
default:
next prev parent reply other threads:[~2013-01-13 17:45 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-13 17:42 [ 00/49] 3.2.37-stable review Ben Hutchings
2013-01-13 17:42 ` [ 01/49] ext4: fix extent tree corruption caused by hole punch Ben Hutchings
2013-01-13 17:42 ` [ 02/49] i915: ensure that VGA plane is disabled Ben Hutchings
2013-01-13 17:42 ` [ 03/49] ext4: check dioread_nolock on remount Ben Hutchings
2013-01-13 17:42 ` [ 04/49] jbd2: fix assertion failure in jbd2_journal_flush() Ben Hutchings
2013-01-13 17:43 ` [ 05/49] hwmon: (lm73} Detect and report i2c bus errors Ben Hutchings
2013-01-13 17:43 ` [ 06/49] ext4: do not try to write superblock on ro remount w/o journal Ben Hutchings
2013-01-13 17:43 ` [ 07/49] PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Ben Hutchings
2013-01-13 17:43 ` [ 08/49] mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED Ben Hutchings
2013-01-13 17:43 ` [ 09/49] cifs: adjust sequence number downward after signing NT_CANCEL request Ben Hutchings
2013-01-13 17:43 ` Ben Hutchings [this message]
2013-01-13 17:43 ` [ 11/49] p54usb: add USB ID for T-Com Sinus 154 data II Ben Hutchings
2013-01-13 17:43 ` [ 12/49] ath9k_hw: Fix RX gain initvals for AR9485 Ben Hutchings
2013-01-13 17:43 ` [ 13/49] p54usb: add USBIDs for two more p54usb devices Ben Hutchings
2013-01-13 17:43 ` [ 14/49] powerpc/vdso: Remove redundant locking in update_vsyscall_tz() Ben Hutchings
2013-01-13 17:43 ` [ 15/49] powerpc: Add missing NULL terminator to avoid boot panic on PPC40x Ben Hutchings
2013-01-13 17:43 ` [ 16/49] drm/radeon: add connector table for SAM440ep embedded board Ben Hutchings
2013-01-13 17:43 ` [ 17/49] drm/radeon: add connector table for Mac G4 Silver Ben Hutchings
2013-01-14 18:48 ` Albrecht Dreß
2013-01-13 17:43 ` [ 18/49] drm/radeon: Properly handle DDC probe for DP bridges Ben Hutchings
2013-01-13 17:43 ` [ 19/49] NFSv4: Add ACCESS operation to OPEN compound Ben Hutchings
2013-01-15 18:42 ` Herton Ronaldo Krzesinski
2013-01-16 1:08 ` Ben Hutchings
2013-01-13 17:43 ` [ 20/49] NFSv4: dont check MAY_WRITE access bit in OPEN Ben Hutchings
2013-01-13 17:43 ` [ 21/49] NFS4: nfs4_opendata_access should return errno Ben Hutchings
2013-01-13 17:43 ` [ 22/49] NFS: Fix access to suid/sgid executables Ben Hutchings
2013-01-13 17:43 ` [ 23/49] drm/nouveau: fix init with agpgart-uninorth Ben Hutchings
2013-01-13 17:43 ` [ 24/49] video: mxsfb: fix crash when unblanking the display Ben Hutchings
2013-01-13 17:43 ` [ 25/49] nfs: fix null checking in nfs_get_option_str() Ben Hutchings
2013-01-13 17:43 ` [ 26/49] SUNRPC: Ensure that we free the rpc_task after cleanups are done Ben Hutchings
2013-01-13 17:43 ` [ 27/49] ACPI / scan: Do not use dummy HID for system bus ACPI nodes Ben Hutchings
2013-01-13 17:43 ` [ 28/49] mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT Ben Hutchings
2013-01-13 17:43 ` [ 29/49] drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield Ben Hutchings
2013-01-13 17:43 ` [ 30/49] drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_time Ben Hutchings
2013-01-13 17:43 ` [ 31/49] udf: dont increment lenExtents while writing to a hole Ben Hutchings
2013-01-13 17:43 ` [ 32/49] epoll: prevent missed events on EPOLL_CTL_MOD Ben Hutchings
2013-01-13 17:43 ` [ 33/49] rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails Ben Hutchings
2013-01-13 17:43 ` [ 34/49] mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL Ben Hutchings
2013-01-13 17:43 ` [ 35/49] Revert: "rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails" Ben Hutchings
2013-01-13 17:43 ` [ 36/49] ftrace: Do not function trace inlined functions Ben Hutchings
2013-01-13 17:43 ` [ 37/49] sparc: huge_ptep_set_* functions need to call set_huge_pte_at() Ben Hutchings
2013-01-13 17:43 ` [ 38/49] inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sock Ben Hutchings
2013-01-13 17:43 ` [ 39/49] net: sched: integer overflow fix Ben Hutchings
2013-01-13 17:43 ` [ 40/49] tcp: implement RFC 5961 3.2 Ben Hutchings
2013-01-13 17:43 ` [ 41/49] tcp: implement RFC 5961 4.2 Ben Hutchings
2013-01-13 17:43 ` [ 42/49] tcp: refine SYN handling in tcp_validate_incoming Ben Hutchings
2013-01-13 17:43 ` [ 43/49] tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming() Ben Hutchings
2013-01-13 17:43 ` [ 44/49] tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation Ben Hutchings
2013-01-13 17:43 ` [ 45/49] [SCSI] mvsas: Fix oops when ata commond timeout Ben Hutchings
2013-01-13 17:43 ` [ 46/49] RDMA/nes: Fix for crash when registering zero length MR for CQ Ben Hutchings
2013-01-13 17:43 ` [ 47/49] RDMA/nes: Fix for terminate timer crash Ben Hutchings
2013-01-13 17:43 ` [ 48/49] ACPI : do not use Lid and Sleep button for S5 wakeup Ben Hutchings
2013-01-13 17:43 ` [ 49/49] aoe: do not call bdi_init after blk_alloc_queue Ben Hutchings
2013-01-13 22:44 ` [ 00/49] 3.2.37-stable review Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130113174257.928401327@decadent.org.uk \
--to=ben@decadent.org.uk \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.