All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Wang Xingchao <xingchao.wang@intel.com>
Cc: daniel.vetter@ffwll.ch, intel-gfx@lists.freedesktop.org,
	paulo.r.zanoni@intel.com
Subject: Re: [PATCH v2] drm/i915: HDMI/DP - ELD info refresh support for Haswell
Date: Fri, 18 Jan 2013 12:45:35 +0200	[thread overview]
Message-ID: <20130118104535.GV3503@intel.com> (raw)
In-Reply-To: <1358477515-7323-1-git-send-email-xingchao.wang@intel.com>

On Fri, Jan 18, 2013 at 10:51:55AM +0800, Wang Xingchao wrote:
> ELD info should be updated dynamically according to hot plug event.
> For haswell chip, clear/set the eld valid bit and output enable bit
> from callback intel_disable/eanble_ddi().

Hmm. Is it OK to set the ELD valid bit if the ELD hasn't actually been
written?

And besides these bits are already set by haswell_write_eld().

> 
> Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c |   18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index f02b3fe..7ce4728 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1274,10 +1274,14 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
>  static void intel_enable_ddi(struct intel_encoder *intel_encoder)
>  {
>  	struct drm_encoder *encoder = &intel_encoder->base;
> +	struct drm_crtc *crtc = encoder->crtc;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	int pipe = intel_crtc->pipe;
>  	struct drm_device *dev = encoder->dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	enum port port = intel_ddi_get_encoder_port(intel_encoder);
>  	int type = intel_encoder->type;
> +	int tmp;
>  
>  	if (type == INTEL_OUTPUT_HDMI) {
>  		/* In HDMI/DVI mode, the port width, and swing/emphasis values
> @@ -1290,18 +1294,32 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder)
>  
>  		ironlake_edp_backlight_on(intel_dp);
>  	}
> +
> +	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> +	tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
> +	I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
>  }
>  
>  static void intel_disable_ddi(struct intel_encoder *intel_encoder)
>  {
>  	struct drm_encoder *encoder = &intel_encoder->base;
> +	struct drm_crtc *crtc = encoder->crtc;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	int pipe = intel_crtc->pipe;
>  	int type = intel_encoder->type;
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	int tmp;
>  
>  	if (type == INTEL_OUTPUT_EDP) {
>  		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>  
>  		ironlake_edp_backlight_off(intel_dp);
>  	}
> +
> +	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> +	tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
> +	I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
>  }
>  
>  int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

  reply	other threads:[~2013-01-18 10:45 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-18  2:51 [PATCH v2] drm/i915: HDMI/DP - ELD info refresh support for Haswell Wang Xingchao
2013-01-18 10:45 ` Ville Syrjälä [this message]
2013-01-18 12:00   ` Wang, Xingchao
2013-01-18 13:13     ` Ville Syrjälä
2013-01-21  5:40       ` Wang, Xingchao
2013-01-21 13:11         ` Ville Syrjälä
2013-01-21 21:54           ` Rodrigo Vivi
2013-01-22  4:04           ` Wang, Xingchao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130118104535.GV3503@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    --cc=xingchao.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.