From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 23 Jan 2013 04:30:32 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: Driver for Texas Instruments INA209 Message-Id: <20130123043032.GA30235@roeck-us.net> List-Id: References: <20090831_202450_066558.tomaz.mertelj@guest.arnes.si> In-Reply-To: <20090831_202450_066558.tomaz.mertelj@guest.arnes.si> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Tue, Jan 22, 2013 at 02:15:30PM -0800, Ira W. Snyder wrote: > On Tue, Jan 22, 2013 at 01:43:48PM -0800, Ira W. Snyder wrote: > > On Mon, Jan 14, 2013 at 10:04:28PM -0800, Guenter Roeck wrote: > > > On Mon, Jan 14, 2013 at 01:17:04PM -0800, Ira W. Snyder wrote: > > > > On Sat, Jan 12, 2013 at 04:16:04PM -0800, Guenter Roeck wrote: > > > > > Add support for the TI / Burr-Brown INA209 voltage / current / power > > > > > monitor. > > > > > > > > > > Cc: Paul Hays > > > > > Cc: Ira W. Snyder > > > > > Signed-off-by: Guenter Roeck > > > > > > > > Hi Guenter, > > > > > > > > I didn't notice any issues with a quick review. Thanks for pushing the > > > > driver to mainline. > > > > > > > Hi Ira, > > > > > > you are welcome. I actually had the code in my queue for a long time; > > > I just found some time last weekend to finally test it. > > > > > > It would be great if you can do some testing and send me a Tested-by and/or > > > Acked-by feedback. > > > > > > > Hi Guenter, > > > > I finally got around to testing this today. The driver works great. > > Please add my: > > > > Tested-by: Ira W. Snyder > > > > One minor suggestion below. Sorry that I didn't catch it earlier. > Hi Ira, I just sent a new version of the driver, with added devicetree support as you suggested. Would be great if you can test it again. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors