All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Grzeschik <mgr@pengutronix.de>
To: Afzal Mohammed <afzal@ti.com>
Cc: Felipe Balbi <balbi@ti.com>,
	linux-usb@vger.kernel.org, linux-omap@vger.kernel.org,
	Ravi Babu <ravibabu@ti.com>
Subject: Re: [PATCH 1/3] usb: otg: nop: add dt support
Date: Sun, 27 Jan 2013 22:40:05 +0100	[thread overview]
Message-ID: <20130127214005.GA18800@pengutronix.de> (raw)
In-Reply-To: <a1dd07e020850703ed5294db176ea1298d69a4ed.1348722156.git.afzal@ti.com>

Hi,

On Thu, Sep 27, 2012 at 11:15:05AM +0530, Afzal Mohammed wrote:
> From: "B, Ravi" <ravibabu@ti.com>
> 
> Added device tree support for nop transceiver driver and updated the
> Documentation with device tree binding information for am33xx platform.
> 
> Signed-off-by: Ravi Babu <ravibabu@ti.com>
> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
> Signed-off-by: Afzal Mohammed <afzal@ti.com>
> ---
> 
> Hi,
> 
> This series is made over over Balbi's usb "master" branch.
> 
> It applies cleanly over "musb" branch too.
> 
> Regards
> Afzal
> 
>  Documentation/devicetree/bindings/usb/am33xx-usb.txt |  3 +++
>  drivers/usb/otg/nop-usb-xceiv.c                      | 10 ++++++++++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
> index ca8fa56..9782585 100644
> --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
> @@ -12,3 +12,6 @@ AM33XX MUSB GLUE
>     represents PERIPHERAL.
>   - power : Should be "250". This signifies the controller can supply upto
>     500mA when operating in host mode.
> +
> +NOP USB PHY
> + - compatible : Should be "nop-xceiv-usb"
> diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
> index e52e35e..64bfbe4 100644
> --- a/drivers/usb/otg/nop-usb-xceiv.c
> +++ b/drivers/usb/otg/nop-usb-xceiv.c
> @@ -27,6 +27,7 @@
>   */
>  
>  #include <linux/module.h>
> +#include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/usb/otg.h>
> @@ -154,12 +155,21 @@ static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id nop_xceiv_id_table[] = {
> +	{ .compatible = "nop-xceiv-usb" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, nop_xceiv_id_table);
> +#endif
> +
>  static struct platform_driver nop_usb_xceiv_driver = {
>  	.probe		= nop_usb_xceiv_probe,
>  	.remove		= __devexit_p(nop_usb_xceiv_remove),
>  	.driver		= {
>  		.name	= "nop_usb_xceiv",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = of_match_ptr(nop_xceiv_id_table),
>  	},
>  };
>  
> -- 
> 1.7.12
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

What happend to that patch? It did not show up in any new series. Is it
queued anywhere?

Regards,
Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  parent reply	other threads:[~2013-01-27 21:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-27  5:45 [PATCH 1/3] usb: otg: nop: add dt support Afzal Mohammed
2012-09-27  5:43 ` [PATCH 2/3] usb: musb: dsps: remove nop unregister Afzal Mohammed
2012-09-27  5:43 ` [PATCH 3/3] usb: musb: dsps: document dt bindings properly Afzal Mohammed
     [not found] ` <a1dd07e020850703ed5294db176ea1298d69a4ed.1348722156.git.afzal-l0cyMroinI0@public.gmane.org>
2012-10-31 14:28   ` [PATCH 1/3] usb: otg: nop: add dt support Afzal Mohammed
2013-01-27 21:40 ` Michael Grzeschik [this message]
2013-01-28 10:04   ` Mohammed, Afzal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130127214005.GA18800@pengutronix.de \
    --to=mgr@pengutronix.de \
    --cc=afzal@ti.com \
    --cc=balbi@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=ravibabu@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.