[PATCH v2 1/2] ARM: kirkwood: Ensure that kirkwood_ge0[01]_init() finds its clock

[jgunthorpe@obsidianresearch.com (Jason Gunthorpe)]

On Wed, Jan 30, 2013 at 05:43:00PM -0500, Jason Cooper wrote:
> > On 01/29/2013 09:32 PM, Jason Cooper wrote:
> > >On Tue, Jan 29, 2013 at 09:08:46PM +0100, Sebastian Hesselbarth wrote:
> > >>Leaves Issue 3, gbe forgets about its MAC address when gated or powered
> > >>down. That should be done with local-mac-address passed by DT enabled
> > >>u-boot or any other (dirty) ATAG hack ;)
> > >
> > >A patch to mv643xx_eth to pull this from DT should solve this.
> 
> Somewhere, Jason Gunthorpe shared his patch to do this.  I'll poke
> around for it and try to get it merged in.

Yes, you asked for the doc update and I haven't had a moment to get a
tree setup for that..

Here are some words though:

     - local-mac-address : Optional, the MAC address to assign to the
       device. If not specified then the MAC address in the HW
       registers is used, but the driver can not be made modular.

diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 7048d7c..2b2cfcb 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2891,6 +2891,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	struct mv643xx_eth_private *mp;
 	struct net_device *dev;
 	struct resource *res;
+	const u8 *mac;
+	int len;
 	int err;
 
 	if (pdev->dev.of_node) {
@@ -2912,6 +2914,10 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 		else
 			pd->phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT;
 
+		mac = of_get_property(pdev->dev.of_node, "local-mac-address", &len);
+		if (mac && len == 6)
+		    memcpy(pd->mac_addr, mac, sizeof pd->mac_addr);
+
 		np = of_parse_phandle(pdev->dev.of_node, "mdio", 0);
 		if (np) {
 			pd->shared = of_find_device_by_node(np);
-- 
1.7.5.4