From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type
Date: Thu, 31 Jan 2013 11:12:57 +0100 [thread overview]
Message-ID: <20130131101257.GR1906@pengutronix.de> (raw)
In-Reply-To: <20130131100107.GD14629@nchen-desktop>
On Thu, Jan 31, 2013 at 06:01:08PM +0800, Peter Chen wrote:
> On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >
> >
> > + for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> > + if (!strcmp(dr_mode, usb_dr_modes[i]))
> > + return i;
>
> if (strcmp(dr_mode, usb_dr_modes[i]) == 0) may be more friendly.
>
> > +
> > +#ifndef __LINUX_USB_OF_H
> > +#define __LINUX_USB_OF_H
> > +
> > +#include <linux/usb/phy.h>
> > +
> > +#ifdef CONFIG_OF
> > +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
>
> Will you put definition to phy.c, I can't find it at this version
This goes to drivers/usb/phy/of.c Sorry, as Kishon noted I missed to git
add the file. See the attached updated patch.
>
> > index e8a5fe8..4e8bfbb 100644
> > --- a/include/linux/usb/otg.h
> > +++ b/include/linux/usb/otg.h
> > @@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
> > /* for OTG controller drivers (and maybe other stuff) */
> > extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
> >
> > +enum usb_dr_mode {
> > + USB_DR_MODE_UNKNOWN,
> > + USB_DR_MODE_HOST,
> > + USB_DR_MODE_PERIPHERAL,
> > + USB_DR_MODE_OTG,
> > +};
> > +
>
> I am not sure if otg.h is a good place to put this, in fact, we need
> a common header file for it.
Well linux/usb/otg.h is at least a header which can be included safely
by everyone interested in usb_dr_mode. Anyway, I'm open for better
suggestions, I just hesitated to add a new file just for this enum.
Sascha
>From 19c1a6552d6aa93f5ff354a224de0679d55a8126 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Tue, 6 Nov 2012 16:10:10 +0100
Subject: [PATCH] USB: add devicetree helpers for determining dr_mode and
phy_type
This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/of.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/usb-common.c | 36 +++++++++++++++++++++++++++++++++++
include/linux/usb/of.h | 27 ++++++++++++++++++++++++++
include/linux/usb/otg.h | 7 +++++++
include/linux/usb/phy.h | 9 +++++++++
6 files changed, 127 insertions(+)
create mode 100644 drivers/usb/phy/of.c
create mode 100644 include/linux/usb/of.h
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_OTG_UTILS) += phy.o
+obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += omap-usb3.o
obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+ [USBPHY_INTERFACE_MODE_UNKNOWN] = "",
+ [USBPHY_INTERFACE_MODE_UTMI] = "utmi",
+ [USBPHY_INTERFACE_MODE_UTMIW] = "utmi_wide",
+ [USBPHY_INTERFACE_MODE_ULPI] = "ulpi",
+ [USBPHY_INTERFACE_MODE_SERIAL] = "serial",
+ [USBPHY_INTERFACE_MODE_HSIC] = "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ const char *phy_type;
+ int err, i;
+
+ err = of_property_read_string(np, "phy_type", &phy_type);
+ if (err < 0)
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+ if (!strcmp(phy_type, usbphy_modes[i]))
+ return i;
+
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
const char *usb_speed_string(enum usb_device_speed speed)
{
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
}
EXPORT_SYMBOL_GPL(usb_speed_string);
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+ [USB_DR_MODE_UNKNOWN] = "",
+ [USB_DR_MODE_HOST] = "host",
+ [USB_DR_MODE_PERIPHERAL] = "peripheral",
+ [USB_DR_MODE_OTG] = "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ const char *dr_mode;
+ int err, i;
+
+ err = of_property_read_string(np, "dr_mode", &dr_mode);
+ if (err < 0)
+ return USB_DR_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+ if (!strcmp(dr_mode, usb_dr_modes[i]))
+ return i;
+
+ return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
/* for OTG controller drivers (and maybe other stuff) */
extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+enum usb_dr_mode {
+ USB_DR_MODE_UNKNOWN,
+ USB_DR_MODE_HOST,
+ USB_DR_MODE_PERIPHERAL,
+ USB_DR_MODE_OTG,
+};
+
#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
#include <linux/notifier.h>
#include <linux/usb.h>
+enum usb_phy_interface {
+ USBPHY_INTERFACE_MODE_UNKNOWN,
+ USBPHY_INTERFACE_MODE_UTMI,
+ USBPHY_INTERFACE_MODE_UTMIW,
+ USBPHY_INTERFACE_MODE_ULPI,
+ USBPHY_INTERFACE_MODE_SERIAL,
+ USBPHY_INTERFACE_MODE_HSIC,
+};
+
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
--
1.7.10.4
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-01-31 10:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-31 9:01 [PATCH v2] Add USB of helpers and use them in the chipidea driver Sascha Hauer
2013-01-31 9:01 ` [PATCH 1/6] USB: move bulk of otg/otg.c to phy/phy.c Sascha Hauer
2013-01-31 9:16 ` kishon
2013-01-31 9:01 ` [PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type Sascha Hauer
2013-01-31 9:12 ` kishon
2013-01-31 9:28 ` Sascha Hauer
2013-01-31 9:30 ` kishon
2013-01-31 9:20 ` Greg KH
2013-01-31 9:26 ` Sascha Hauer
2013-01-31 10:01 ` Peter Chen
2013-01-31 10:12 ` Sascha Hauer [this message]
2013-01-31 9:01 ` [PATCH 3/6] USB: chipidea: ci13xxx-imx: create dynamic platformdata Sascha Hauer
2013-01-31 9:44 ` Peter Chen
2013-01-31 9:01 ` [PATCH 4/6] USB: chipidea: add PTW and PTS handling Sascha Hauer
2013-01-31 9:46 ` Peter Chen
2013-01-31 9:01 ` [PATCH 5/6] USB chipidea: introduce dual role mode pdata flags Sascha Hauer
2013-01-31 9:01 ` [PATCH 6/6] USB chipidea i.MX: introduce dr_mode property Sascha Hauer
2013-01-31 9:47 ` Peter Chen
-- strict thread matches above, loose matches on Subject: below --
2013-01-30 15:29 [PATCH] Add USB of helpers and use them in the chipidea driver Sascha Hauer
2013-01-30 15:29 ` [PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type Sascha Hauer
2013-01-31 2:30 ` Peter Chen
2013-01-31 8:05 ` Sascha Hauer
2013-01-31 6:14 ` kishon
2013-01-31 7:43 ` Sascha Hauer
2013-01-31 8:17 ` kishon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130131101257.GR1906@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.