From: mats.liljegren@enea.com (Mats Liljegren)
To: linux-arm-kernel@lists.infradead.org
Subject: Porting 3.8-rc4-nohz3 to ARM (PandaBoard)
Date: Mon, 11 Feb 2013 20:03:17 +0100 [thread overview]
Message-ID: <20130211190317.GA8513@enea.se> (raw)
In-Reply-To: <CAFTL4hyNZdjmSij0DDouu0mmD5E3xApq7i=dZD941ZtCM1QyjQ@mail.gmail.com>
Frederic Weisbecker wrote:
> 2013/2/4 Mats Liljegren <mats.liljegren@enea.com>:
> > Hi Frederic,
> >
> > (Sorry for the re-post, I spelled the mailing list wrong...)
> >
> > I want to port dynticks patches 3.8-rc4-nohz3 to ARM architecture, and try it out on the PandaBoard. Initially this is for evaluating it, but if it looks promising I'd like to upstream this.
> >
> > As far as I can see the first thing to do is to implement virtual time accounting. After an initial look at the patches done for ia64, it doesn't look too difficult.
>
> No that part is handled by the core code. But you need to implement
> the context tracking arch backend.
> Here is what Li Zhong did to port it on Powerpc for example:
> https://lkml.org/lkml/2013/2/1/216
>
> > Are there any caveats I should be aware of?
>
> The generic cputime accounting only works on 64 bits archs. We'll need
> to do some safe accessors to read the kernel_stat. In the meantime you
> can do home tests by removing the CONFIG_64BIT dependency. This
> shouldn't be dangerous
>
> > Has anyone else started any work in this area that I could co-operate with?
>
> Yeah two people have been working on this. But it was several month
> ago and I haven't hear from them since then. I'm adding Geoff in Cc. I
> can't retrieve the other guy who has worked on it too.
Could the other guy be Kevin Hillman? The name has been mentioned to me but
I don't have his e-mail address.
I have stumbled across a problem, I get the following error messages during
boot:
---- Start snippet ----
[ 41.119873] INFO: task rcuo1:10 blocked for more than 20 seconds.
[ 41.126373] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 41.134765] rcuo1 D c045c5d8 0 10 2 0x00000000
[ 41.141662] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 41.150329] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 41.159423] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 41.168487] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 41.177124] no locks held by rcuo1/10.
[ 41.181182] INFO: task rcuo1:12 blocked for more than 20 seconds.
[ 41.187683] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 41.196044] rcuo1 D c045c5d8 0 12 2 0x00000000
[ 41.202911] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 41.211578] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 41.220733] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 41.229705] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 41.238372] no locks held by rcuo1/12.
[ 61.239868] INFO: task rcuo1:10 blocked for more than 20 seconds.
[ 61.246337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 61.254730] rcuo1 D c045c5d8 0 10 2 0x00000000
[ 61.261596] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 61.270294] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 61.279357] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 61.288391] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 61.297058] no locks held by rcuo1/10.
[ 61.301116] INFO: task rcuo1:12 blocked for more than 20 seconds.
[ 61.307617] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 61.315979] rcuo1 D c045c5d8 0 12 2 0x00000000
[ 61.322845] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 61.331512] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 61.340667] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 61.349639] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 61.358306] no locks held by rcuo1/12.
[ 81.359863] INFO: task swapper/0:1 blocked for more than 20 seconds.
[ 81.366638] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 81.374999] swapper/0 D c045c5d8 0 1 0 0x00000000
[ 81.381866] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 81.390563] [<c045c880>] (schedule+0x74/0x78) from [<c0459c0c>] (schedule_timeout+0x1e4/0x244)
[ 81.399719] [<c0459c0c>] (schedule_timeout+0x1e4/0x244) from [<c0459c9c>] (schedule_timeout_uninterruptible+0x30/0x34)
[ 81.411163] [<c0459c9c>] (schedule_timeout_uninterruptible+0x30/0x34) from [<c0057a98>] (msleep+0x24/0x30)
[ 81.421508] [<c0057a98>] (msleep+0x24/0x30) from [<c0659d20>] (mount_root+0x74/0xfc)
[ 81.429748] [<c0659d20>] (mount_root+0x74/0xfc) from [<c0659ed0>] (prepare_namespace+0x128/0x18c)
[ 81.439270] [<c0659ed0>] (prepare_namespace+0x128/0x18c) from [<c044e35c>] (kernel_init+0x1cc/0x338)
[ 81.449066] [<c044e35c>] (kernel_init+0x1cc/0x338) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 81.458282] no locks held by swapper/0/1.
[ 81.462615] INFO: task rcuo1:10 blocked for more than 20 seconds.
[ 81.469085] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 81.477447] rcuo1 D c045c5d8 0 10 2 0x00000000
[ 81.484313] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 81.493011] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 81.502136] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 81.511169] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 81.519836] no locks held by rcuo1/10.
[ 81.523834] INFO: task rcuo1:12 blocked for more than 20 seconds.
[ 81.530364] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 81.538696] rcuo1 D c045c5d8 0 12 2 0x00000000
[ 81.545562] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 81.554229] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 81.563354] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 81.572387] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 81.581054] no locks held by rcuo1/12.
[ 101.579895] INFO: task rcuo1:10 blocked for more than 20 seconds.
[ 101.586364] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 101.594757] rcuo1 D c045c5d8 0 10 2 0x00000000
[ 101.601623] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 101.610290] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 101.619384] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 101.628417] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 101.637084] no locks held by rcuo1/10.
[ 101.641143] INFO: task rcuo1:12 blocked for more than 20 seconds.
[ 101.647613] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 101.656005] rcuo1 D c045c5d8 0 12 2 0x00000000
[ 101.662872] [<c045c5d8>] (__schedule+0x8f4/0xa74) from [<c045c880>] (schedule+0x74/0x78)
[ 101.671539] [<c045c880>] (schedule+0x74/0x78) from [<c00df138>] (rcu_nocb_kthread+0xdc/0x224)
[ 101.680664] [<c00df138>] (rcu_nocb_kthread+0xdc/0x224) from [<c006d830>] (kthread+0xb0/0xbc)
[ 101.689636] [<c006d830>] (kthread+0xb0/0xbc) from [<c00142c8>] (ret_from_fork+0x14/0x20)
[ 101.698303] no locks held by rcuo1/12.
[ 112.400695] VFS: Unable to mount root fs via NFS, trying floppy.
[ 112.407226] List of all partitions:
[ 112.411041] No filesystem could mount root, tried:
[ 112.416351] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
[ 112.425262] CPU1: stopping
[ 112.428161] [<c001dcb8>] (unwind_backtrace+0x0/0x104) from [<c0453cb8>] (dump_stack+0x20/0x24)
[ 112.437316] [<c0453cb8>] (dump_stack+0x20/0x24) from [<c001b16c>] (handle_IPI+0xf4/0x154)
[ 112.445983] [<c001b16c>] (handle_IPI+0xf4/0x154) from [<c0008600>] (gic_handle_irq+0x68/0x84)
[ 112.455047] [<c0008600>] (gic_handle_irq+0x68/0x84) from [<c045df84>] (__irq_svc+0x44/0x58)
[ 112.463897] Exception stack(0xeda29f68 to 0xeda29fb0)
[ 112.469238] 9f60: 00000001 00000001 00000000 eda20a80 eda28000 eda28000
[ 112.477905] 9f80: c073d9c8 c06c0574 c0468c60 eda28000 c06c4f90 eda29fdc eda29f80 eda29fb0
[ 112.486572] 9fa0: c00ab854 c00156fc 20000113 ffffffff
[ 112.491943] [<c045df84>] (__irq_svc+0x44/0x58) from [<c00156fc>] (cpu_idle+0xac/0x128)
[ 112.500366] [<c00156fc>] (cpu_idle+0xac/0x128) from [<c0450a1c>] (secondary_start_kernel+0xec/0x104)
[ 112.510040] [<c0450a1c>] (secondary_start_kernel+0xec/0x104) from [<8044ff88>] (0x8044ff88)
PANIC: VFS: Unable to mount root fs on unknown-block(2,0)
---- End snipped ----
Do you have any suggestions for the best way of tracking down the cause?
Regards
Mats Liljegren
next prev parent reply other threads:[~2013-02-11 19:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 20:02 Porting 3.8-rc4-nohz3 to ARM (PandaBoard) Mats Liljegren
2013-02-08 16:31 ` Frederic Weisbecker
2013-02-08 17:04 ` Geoff Levand
2013-02-08 19:10 ` Mats Liljegren
2013-02-11 19:03 ` Mats Liljegren [this message]
2013-02-14 23:08 ` Kevin Hilman
2013-02-20 16:12 ` Frederic Weisbecker
2013-02-20 18:28 ` Mats Liljegren
2013-02-21 16:19 ` Frederic Weisbecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130211190317.GA8513@enea.se \
--to=mats.liljegren@enea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.