From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: pull request: wireless 2013-02-12
Date: Tue, 12 Feb 2013 11:03:16 -0500 [thread overview]
Message-ID: <20130212160316.GA2086@tuxdriver.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 6762 bytes --]
Dave,
Here is another handful of late-breaking fixes intended for the 3.8
stream... Hopefully the will still make it! :-)
There are three mac80211 fixes pulled from Johannes:
"Here are three fixes still for the 3.8 stream, the fix from Cong Ding
for the bad sizeof (Stephen Hemminger had pointed it out before but I'd
promptly forgotten), a mac80211 managed-mode channel context usage fix
where a downgrade would never stop until reaching non-HT and a bug in
the channel determination that could cause invalid channels like HT40+
on channel 11 to be used."
Also included is a mwl8k fix that avoids an oops when using mwl8k
devices that only support the 5 GHz band.
Please let me know if there are problems!
John
---
The following changes since commit 547b4e718115eea74087e28d7fa70aec619200db:
bridge: set priority of STP packets (2013-02-11 14:16:52 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
for you to fetch changes up to 318d86dbe55cbc63a61a83b9ff6cdbc044905f5e:
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-02-12 10:41:46 -0500)
----------------------------------------------------------------
Cong Ding (1):
mac80211: fix error in sizeof() usage
Johannes Berg (2):
mac80211: fix managed mode channel context use
mac80211: fix channel selection bug
John W. Linville (2):
Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Jonas Gorski (1):
mwl8k: fix band for supported channels
drivers/net/wireless/mwl8k.c | 36 ++++++++++++++++++------------------
net/mac80211/cfg.c | 3 ++-
net/mac80211/mlme.c | 11 +++++++----
3 files changed, 27 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 83564d3..a00a03e 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -318,20 +318,20 @@ struct mwl8k_sta {
#define MWL8K_STA(_sta) ((struct mwl8k_sta *)&((_sta)->drv_priv))
static const struct ieee80211_channel mwl8k_channels_24[] = {
- { .center_freq = 2412, .hw_value = 1, },
- { .center_freq = 2417, .hw_value = 2, },
- { .center_freq = 2422, .hw_value = 3, },
- { .center_freq = 2427, .hw_value = 4, },
- { .center_freq = 2432, .hw_value = 5, },
- { .center_freq = 2437, .hw_value = 6, },
- { .center_freq = 2442, .hw_value = 7, },
- { .center_freq = 2447, .hw_value = 8, },
- { .center_freq = 2452, .hw_value = 9, },
- { .center_freq = 2457, .hw_value = 10, },
- { .center_freq = 2462, .hw_value = 11, },
- { .center_freq = 2467, .hw_value = 12, },
- { .center_freq = 2472, .hw_value = 13, },
- { .center_freq = 2484, .hw_value = 14, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2412, .hw_value = 1, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2417, .hw_value = 2, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2422, .hw_value = 3, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2427, .hw_value = 4, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2432, .hw_value = 5, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2437, .hw_value = 6, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2442, .hw_value = 7, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2447, .hw_value = 8, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2452, .hw_value = 9, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2457, .hw_value = 10, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2462, .hw_value = 11, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2467, .hw_value = 12, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2472, .hw_value = 13, },
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2484, .hw_value = 14, },
};
static const struct ieee80211_rate mwl8k_rates_24[] = {
@@ -352,10 +352,10 @@ static const struct ieee80211_rate mwl8k_rates_24[] = {
};
static const struct ieee80211_channel mwl8k_channels_50[] = {
- { .center_freq = 5180, .hw_value = 36, },
- { .center_freq = 5200, .hw_value = 40, },
- { .center_freq = 5220, .hw_value = 44, },
- { .center_freq = 5240, .hw_value = 48, },
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5180, .hw_value = 36, },
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5200, .hw_value = 40, },
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5220, .hw_value = 44, },
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5240, .hw_value = 48, },
};
static const struct ieee80211_rate mwl8k_rates_50[] = {
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 516fbc9..0479c64 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2004,7 +2004,8 @@ static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- memcpy(sdata->vif.bss_conf.mcast_rate, rate, sizeof(rate));
+ memcpy(sdata->vif.bss_conf.mcast_rate, rate,
+ sizeof(int) * IEEE80211_NUM_BANDS);
return 0;
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a355292..5107248 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3400,6 +3400,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
ret = 0;
+out:
while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
IEEE80211_CHAN_DISABLED)) {
if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
@@ -3408,14 +3409,13 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
goto out;
}
- ret = chandef_downgrade(chandef);
+ ret |= chandef_downgrade(chandef);
}
if (chandef->width != vht_chandef.width)
sdata_info(sdata,
- "local regulatory prevented using AP HT/VHT configuration, downgraded\n");
+ "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
-out:
WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
return ret;
}
@@ -3529,8 +3529,11 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
*/
ret = ieee80211_vif_use_channel(sdata, &chandef,
IEEE80211_CHANCTX_SHARED);
- while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT)
+ while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
ifmgd->flags |= chandef_downgrade(&chandef);
+ ret = ieee80211_vif_use_channel(sdata, &chandef,
+ IEEE80211_CHANCTX_SHARED);
+ }
return ret;
}
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next reply other threads:[~2013-02-12 16:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-12 16:03 John W. Linville [this message]
2013-02-12 21:13 ` pull request: wireless 2013-02-12 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130212160316.GA2086@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.