Re: [PATCH 1/1] highbank: use the provided dtb by the firmware to probe barebox device and mem size

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

Hi.

	it's a rfc

Best Regards,
J.
On 22:11 Tue 12 Feb     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> the dtb is at 0x1000
> 
> if no dtb present use C code device
> 
> kepp in C the timer/gpio/uart
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/boards/highbank/env/bin/init_board |    7 +++++
>  arch/arm/boards/highbank/init.c             |   44 ++++++++++++++++++++++++---
>  2 files changed, 47 insertions(+), 4 deletions(-)
>  create mode 100644 arch/arm/boards/highbank/env/bin/init_board
> 
> diff --git a/arch/arm/boards/highbank/env/bin/init_board b/arch/arm/boards/highbank/env/bin/init_board
> new file mode 100644
> index 0000000..610db15
> --- /dev/null
> +++ b/arch/arm/boards/highbank/env/bin/init_board
> @@ -0,0 +1,7 @@
> +#!/bin/sh
> +
> +if [ -e /dev/dtb ]
> +then
> +	oftree -l /dev/dtb
> +	oftree -p
> +fi
> diff --git a/arch/arm/boards/highbank/init.c b/arch/arm/boards/highbank/init.c
> index 9fb7986..a01db5b 100644
> --- a/arch/arm/boards/highbank/init.c
> +++ b/arch/arm/boards/highbank/init.c
> @@ -15,20 +15,56 @@
>  #include <sizes.h>
>  #include <io.h>
>  
> +struct fdt_header *fdt = NULL;
> +
>  static int highbank_mem_init(void)
>  {
> +	struct device_node *np;
> +	u32 reg[2];
> +	int ret;
> +
> +	/* load by the firmware at 0x1000 */
> +	fdt = IOMEM(0x1000);
> +
> +	ret = of_unflatten_dtb(fdt);
> +	if (ret) {
> +		pr_warn("no dtb found at 0x1000 use default configuration\n");
> +		fdt = NULL;
> +		goto not_found;
> +	}
> +
> +	np = of_find_node_by_path("/memory");
> +	if (!np) {
> +		pr_warn("no memory node use default configuration\n");
> +		goto not_found;
> +	}
> +
> +	ret = of_property_read_u32_array(np, "reg", reg, 2); 
> +	if (ret) {
> +		pr_warn("memory node: no reg property use default configuration\n");
> +		goto not_found;
> +	}
> +
> +	pr_info("highbank: dtb probed mem_size = 0x%x\n", reg[1]);
> +
> +	highbank_add_ddram(reg[1]);
> +
> +not_found:
>  	//highbank_add_ddram(4089 << 20);
>  	highbank_add_ddram(SZ_1G);
> -
>  	return 0;
>  }
>  mem_initcall(highbank_mem_init);
>  
>  static int highbank_devices_init(void)
>  {
> -	highbank_register_ahci();
> -	highbank_register_xgmac(0);
> -	highbank_register_xgmac(1);
> +	if (!fdt) {
> +		highbank_register_ahci();
> +		highbank_register_xgmac(0);
> +		highbank_register_xgmac(1);
> +	} else {
> +		devfs_add_partition("ram1", 0x1000, SZ_64K, DEVFS_PARTITION_FIXED, "dtb");
> +	}
>  
>  	armlinux_set_bootparams((void *)(0x00000100));
>  
> -- 
> 1.7.10.4
> 

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox